A spatially explicit map of aboveground carbon stored in Mexico’s forests was generated from empirical modeling on forest inventory and spaceborne optical and radar data. Between 2004 and 2007, the Mexican National Forestry Commission (CONAFOR) established a network of ~26,000 permanent inventory plots in the frame of their national inventory program, the Inventario Nacional Forestal y de Suelos (INFyS). INFyS data served as model response for spatially extending the field-based estimates of carbon stored in the aboveground live dry biomass to a wall-to-wall map, with 30 × 30 m² pixel posting using canopy density estimates derived from Landsat, L-Band radar data from ALOS PALSAR, as well as elevation information derived from the Shuttle Radar Topography Mission (SRTM) data set. Validation against an independent set of INFyS plots resulted in a coefficient of determination (R²) of 0.5 with a root mean square error (RMSE) of 14 t∙C/ha in the case of flat terrain. The validation for different forest types showed a consistently low estimation bias (15°) with an R² of 0.34. A comparison of the average carbon stocks computed from: (a) the map; and (b) statistical estimates from INFyS, at the scale of ~650 km² large hexagons (R² of 0.78, RMSE of 5 t∙C/ha) and Mexican states (R² of 0.98, RMSE of 1.4 t∙C/ha), showed strong agreement.

Estimation of forest biomass with synthetic aperture radar (SAR) and interferometric SAR (InSAR) observables has been surveyed in 186 peer-reviewed papers to identify major research pathways in terms of data used and retrieval models. Research evaluated primarily (i) L-band observations of SAR backscatter; and, (ii) single-image or multi-polarized retrieval schemes. The use of multi-temporal or multi-frequency data improved the biomass estimates when compared to single-image retrieval. Low frequency SAR backscatter contributed the most to the biomass estimates. Single-pass InSAR height was reported to be a more reliable predictor of biomass, overcoming the loss of sensitivity of SAR backscatter and coherence in high biomass forest. A variety of empirical and semi-empirical regression models relating biomass to the SAR observables were proposed. Semi-empirical models were mostly used for large-scale mapping because of the simple formulation and the robustness of the model parameters estimates to forest structure and environmental conditions. Non-parametric models were appraised for their capability to ingest multiple observations and perform accurate retrievals having a large number of training samples available. Some studies argued that estimating compartment biomass (in stems, branches, foliage) with different types of SAR observations would lead to an improved estimate of total biomass. Although promising, scientific evidence for such an assumption is still weak. The increased availability of free and open SAR observations from currently orbiting and forthcoming spaceborne SAR missions will foster studies on forest biomass retrieval. Approaches attempting to maximize the information content on biomass of individual data streams shall be pursued.

Estimating forest area at a national scale within the United Nations program of Reducing Emissions from Deforestation and Forest Degradation (REDD) is primarily based on land cover information using remote sensing technologies. Timely delivery for a country of a size like Mexico can only be achieved in a standardized and cost-effective manner by automatic image classification. This paper describes the operational land cover monitoring system for Mexico. It utilizes national-scale cartographic reference data, all available Landsat satellite imagery, and field inventory data for validation. Seven annual national land cover maps between 1993 and 2008 were produced. The classification scheme defined 9 and 12 classes at two hierarchical levels. Overall accuracies achieved were up to 76%. Tropical and temperate forest was classified with accuracy up to 78% and 82%, respectively. Although specifically designed for the needs of Mexico, the general process is suitable for other participating countries in the REDD+ program to comply with guidelines on standardization and transparency of methods and to assure comparability. However, reporting of change is ill-advised based on the annual land cover products and a combination of annual land cover and change detection algorithms is suggested.

We have investigated for forest plantations in Chile the stand-level retrieval of canopy height (CH) and growing stock volume (GSV) using Airborne Laser Scanner (ALS), ALOS PALSAR and Landsat. In a two-stage up-scaling approach, ensemble regression tree models (randomForest) were used to relate a suite of ALS canopy structure indices to stand-level in situ measurements of CH and GSV for 319 stands. The retrieval of CH and GSV with ALS yielded high accuracies with R²s of 0.93 and 0.81, respectively. A second set of randomForest models was developed using multi-temporal ALOS PALSAR intensities and repeat-pass coherences in two polarizations as well as Landsat data as predictor and stand-level ALS based estimates of CH and GSV as response variables. At three test sites, the retrieval of CH and GSV with PALSAR/Landsat reached promising accuracies with R²s in the range of 0.7 to 0.85. We show that the combined use of multi-temporal PALSAR intensity, coherence and Landsat yields higher retrieval accuracies than the retrieval with any of the datasets alone. Potential limitations for the large-area application of the fusion approach included (1) the low sensitivity of ALS first/last return data to forest horizontal structure, affecting the retrieval of GSV in less managed types of forest, and (2) the dense ALS sampling required to achieve high retrieval accuracies at larger scale.

The simultaneous availability of observations from space by remote sensing platforms operating at multiple frequencies in the microwave domain suggests investigating their complementarity in thematic mapping and retrieval of biophysical parameters. In particular, there is an interest to understand whether the wealth of short wavelength Synthetic Aperture Radar (SAR) backscatter observations at X-, C-, and L-band from currently operating spaceborne missions can improve the retrieval of forest stem volume, i.e., above-ground biomass, in the boreal zone with respect to a single frequency band. To this scope, repeated observations from TerraSAR-X, Sentinel-1 and ALOS-2 PALSAR-2 from the test sites of Remningstorp and Krycklan, Sweden, have been analyzed and used to estimate stem volume with a retrieval framework based on the Water Cloud Model. Individual estimates of stem volume were then combined linearly to form single-frequency and multi-frequency estimates. The retrieval was assessed at large 0.5 ha forest inventory plots (Remningstorp) and small 0.03 ha forest inventory plots (Krycklan). The relationship between SAR backscatter and stem volume differed depending on forest structure and environmental conditions, in particular at X- and C-band. The highest retrieval accuracy was obtained at both test sites at L-band. The combination of stem volume estimates from data acquired at two or three frequencies achieved an accuracy that was superior to values obtained at a single frequency. When combining estimates from X-, C-, and L-band data, the relative RMSE for the 0.5 ha inventory plots at Remningstorp was 31.3%. For the 0.03 ha inventory plots at Krycklan, the relative RMSE was above 50%. In a retrieval scenario involving short wavelength SAR backscatter data, these results suggest combining multiple frequencies to ensure the highest possible retrieval accuracy achievable. Retrievals should be undertaken to target spatial scales well above the size of a pixel.