Low-land permafrost areas are subject to intense freeze-thaw cycles and characterized by remarkable surface displacement. We used Sentinel-1 SAR interferometry (InSAR) in order to analyse the summer surface displacement over four spots in the Arctic and Antarctica since 2015. Choosing floodplain or outcrop areas as the reference for the InSAR relative deformation measurements, we found maximum subsidence of about 3 to 10 cm during the thawing season with generally high spatial variability. Sentinel-1 time-series of interferograms with 6–12 day time intervals highlight that subsidence is often occurring rather quickly within roughly one month in early summer. Intercomparison of summer subsidence from Sentinel-1 in 2017 with TerraSAR-X in 2013 over part of the Lena River Delta (Russia) shows a high spatial agreement between both SAR systems. A comparison with in-situ measurements for the summer of 2014 over the Lena River Delta indicates a pronounced downward movement of several centimetres in both cases but does not reveal a spatial correspondence between InSAR and local in-situ measurements. For the reconstruction of longer time-series of deformation, yearly Sentinel-1 interferograms from the end of the summer were considered. However, in order to infer an effective subsidence of the surface through melting of excess ice layers over multi-annual scales with Sentinel-1, a longer observation time period is necessary.

L-band (1–2 GHz) microwave radiometry is a remote sensing technique that can be used to monitor soil moisture, and is deployed in the Soil Moisture and Ocean Salinity (SMOS) Mission of the European Space Agency (ESA). Performing ground-based radiometer campaigns before launch, during the commissioning phase and during the operative SMOS mission is important for validating the satellite data and for the further improvement of the radiative transfer models used in the soil-moisture retrieval algorithms. To address these needs, three identical L-band radiometer systems were ordered by ESA. They rely on the proven architecture of the ETH L-Band radiometer for soil moisture research (ELBARA) with major improvements in the microwave electronics, the internal calibration sources, the data acquisition, the user interface, and the mechanics. The purpose of this paper is to describe the design of the instruments and the main characteristics that are relevant for the user.

The simultaneous availability of observations from space by remote sensing platforms operating at multiple frequencies in the microwave domain suggests investigating their complementarity in thematic mapping and retrieval of biophysical parameters. In particular, there is an interest to understand whether the wealth of short wavelength Synthetic Aperture Radar (SAR) backscatter observations at X-, C-, and L-band from currently operating spaceborne missions can improve the retrieval of forest stem volume, i.e., above-ground biomass, in the boreal zone with respect to a single frequency band. To this scope, repeated observations from TerraSAR-X, Sentinel-1 and ALOS-2 PALSAR-2 from the test sites of Remningstorp and Krycklan, Sweden, have been analyzed and used to estimate stem volume with a retrieval framework based on the Water Cloud Model. Individual estimates of stem volume were then combined linearly to form single-frequency and multi-frequency estimates. The retrieval was assessed at large 0.5 ha forest inventory plots (Remningstorp) and small 0.03 ha forest inventory plots (Krycklan). The relationship between SAR backscatter and stem volume differed depending on forest structure and environmental conditions, in particular at X- and C-band. The highest retrieval accuracy was obtained at both test sites at L-band. The combination of stem volume estimates from data acquired at two or three frequencies achieved an accuracy that was superior to values obtained at a single frequency. When combining estimates from X-, C-, and L-band data, the relative RMSE for the 0.5 ha inventory plots at Remningstorp was 31.3%. For the 0.03 ha inventory plots at Krycklan, the relative RMSE was above 50%. In a retrieval scenario involving short wavelength SAR backscatter data, these results suggest combining multiple frequencies to ensure the highest possible retrieval accuracy achievable. Retrievals should be undertaken to target spatial scales well above the size of a pixel.

The planned launch of a spaceborne P-band radar mission and the availability of C- and L-band data from several spaceborne missions suggest investigating the complementarity of C-, L-, and P-band backscatter with respect to the retrieval of forest above-ground biomass. Existing studies on the retrieval of biomass with multi-frequency backscatter relied on single observations of the backscatter and were thus not able to demonstrate the potential of multi-temporal C- and L-band data that are now available from spaceborne missions. Based on spaceborne C- and L-band and airborne P-band images acquired over a forest site in southern Sweden, we investigated whether C- and L-band backscatter may complement retrievals of above-ground biomass from P-band. To this end, a retrieval framework was adopted that utilizes a semi-empirical model for C- and L-bands and an empirical parametric model for P-band. Estimates of above-ground biomass were validated with the aid of 20 m-diameter plots and a LiDAR-derived biomass map with 100 m × 100 m pixel size. The highest retrieval accuracy when not combining frequencies was obtained for P-band with a relative root mean square error (RMSE) of 30% at the hectare scale. The retrieval with multi-temporal L- and C-bands produced errors of the order of 40% and 50%, respectively. The P-band retrieval could be improved for 4% when using P-, L-, and C-bands jointly. The combination of C- and L-bands allowed for retrieval accuracies close to those achieved with P-band. A crucial requirement for achieving an error of 30% with C- and L-bands was the use of multi-temporal observations, which was highlighted by the fact that the retrieval with the best individual L-band image was associated with an error of 61%. The results of this study reconfirmed that P-band is the most suited frequency for the retrieval of above-ground biomass of boreal forests based on backscatter, but also highlight the potential of multi-temporal C- and L-band imagery for mapping above-ground biomass, for instance in areas where the planned ESA BIOMASS P-band mission will not be allowed to acquire data.