Hiram Badillo-Almaraz

Dr. Hiram Badillo-Almaraz

orcid

Research Focus & Metrics

Academic Career Length

26Years (2001-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2007 in Earthquake Spectra
Verified
Journal Article
Closed access
HBHiram Badillo-Almaraz
Hiram Badillo-Almaraz
AWAndrew S. Whittaker
Andrew S. Whittaker
ARAndrei M. Reinhorn
Andrei M. Reinhorn
Full‐scale dynamic testing of suspended ceiling systems was performed to obtain fragility data suitable for performance‐based assessment and design. On the basis of the fragility data derived from testing, (1) the use of retainer clips improves the performance of ceiling systems in terms of loss of tiles, (2) including recycled cross tees in the suspension grid increases the vulnerability of the ceiling systems, (3) undersized (poorly fitting) tiles are substantially more vulnerable than properly fitted tiles, and (4) the use of compression posts improves the seismic performance of ceiling systems for the limit states of minor and moderate damage. Fragility curves are provided for four damage states.

1 August 2001 in Earthquake Spectra
Verified
Journal Article
Closed access
Sonia E. RuizSonia E. Ruiz
Sonia E. Ruiz
HBHiram Badillo-Almaraz
Hiram Badillo-Almaraz
A performance‐based approach for seismic retrofitting of buildings with energy dissipating devices is presented. The approach may be seen as an algorithm useful for converging to a preliminary design of a system to be analyzed according to the time history approach recommended in the NEHRP Guidelines for the Seismic Rehabilitation of Buildings (FEMA 273) . The algorithm is based on the analysis of equivalent single‐degree‐of‐freedom models with added parallel elements that represent the dissipating devices. The combined systems are analyzed under sets of accelerograms associated with different return intervals. The acceptance criteria are intended to control the peak drift of the rehabilitated structure and the maximum ductility demand of the dissipating devices. It is required that these maximum structural responses, for a given seismic intensity, be equal to or smaller than those associated with a given probability of exceedance. The approach is successfully applied to a ten‐story, three‐bay frame rehabilitated with U‐shaped steel dissipators.

10 January 2024 in Remote Sensing
Verified
Journal Article
Open access
PDF file
ETEric Muñoz de la Torre
Eric Muñoz de la Torre
JGJulián González-Trinidad
Julián González-Trinidad
EGEfrén González-Ramírez
Efrén González-Ramírez
CBCarlos Bautista-Capetillo
Carlos Bautista-Capetillo
Hugo Júnez FerreiraHugo Júnez Ferreira
Hugo Júnez Ferreira
MRMaria Ines Rivas Recendez
Maria Ines Rivas Recendez
In the last few years, Satellite Precipitation Estimates (SPE) have been increasingly used for rainfall estimation applications. Their validity and accuracy are influenced by several factors related to the location where the SPEs are applied. The objective of this study is to evaluate the performance of the Integrated Multisatellite Retrievals for Global Precipitation Measurement Version 06 Half-Hour Temporal Resolution (IMERG-FR V06 HH) for rainfall estimation, as well as to determine its relationships with the hourly and daily rain gauge network data in a semiarid region during 2019–2021. The methodology contemplates the temporality, elevation, rainfall intensity, and rain gauge density variables, carrying out a point-to-pixel analysis using continuous, (Bias, r, ME, and RMSE), categorical (POD, FAR, and CSI), and volumetric (VHI, VFAR, and VCSI) statistical metrics to understand the different behaviors between the rain gauge and IMERG-FR V06 HH data. IMERG-FR greatly underestimated the heavy rainfall events in values of −63.54 to −23.58 mm/day and −25.29 to −11.74 mm/30 min; however, it overestimates the frequency of moderate rain events (1 to 25 mm/day). At making the correlation (r) between the temporal scales, the monthly temporal resolution was the one that better relates the measured and estimated data, as well as reported r values of 0.83 and 0.85, where records at shorter durations in IMERG-FR do not detect them. The weakness of this system, according to the literature and confirmed by the research findings, in the case of hydrological phenomena, is that recording or estimating short durations is essential for the water project, and therefore, the placement of rain gauges. The 1902–2101 m.a.s.l. range elevation has the best behavior between the data with the lowest error and best detection ability, of which IMERG-FR tended to overestimate the rain at higher altitudes. Considering that the r for two automated rain gauges per IMERG-FR pixel density was 0.74, this indicates that the automated rain gauges versus IMERG-FR have a better data fit than the rain gauges versus IMERG-FR. The distance to centroid and climatic evaluations did not show distinctive differences in the performance of IMERG. These findings are useful to improve the IMERG-FR algorithms, guide users about its performance at semiarid plateau regions, and assist in the recording of data for hydrological projects.

22 September 2021 in Acta Universitaria
Verified
Journal Article
Open access
PDF file
ACAntonio Barrón Corvera
Antonio Barrón Corvera
PAPedro Alvarado-Medellin
Pedro Alvarado-Medellin
CCCarlos Francisco Bautista Capetillo
Carlos Francisco Bautista Capetillo
HBHiram Badillo-Almaraz
Hiram Badillo-Almaraz
La creciente exigencia de agua por parte de los distintos usuarios supone aprovechar mejor el recurso disponible. Por ello, constantemente se desarrollan tecnologías para incrementar la eficiencia en su uso, sobre todo en los sistemas de conducción y distribución. En este trabajo se presenta una herramienta computacional desarrollada en lenguaje Visual C# para diseñar redes presurizadas (RedesUAZ), fundamentada en el análisis matricial de estructuras utilizando el método de rigideces. Aunque surge de la necesidad de tener universidades públicas que cuenten con recursos didácticos propios de libre acceso para la formación de los estudiantes, dicha herramienta es de utilidad para diseñar, en la práctica, redes presurizadas pequeñas. Para evaluar su rendimiento, se comparó con dos alternativas implementadas para el mismo fin (A1: Huddleston et al. [2004] / RedesUAZ; A2: EPANET / RedesUAZ), siendo los resultados hidráulicos equiparables entre sí. El análisis de las tres propuestas muestra diferencias relativas en caudales (A1: 6.01%, A2: 10.83%), velocidades (A2: 21.31%) y presiones (A2: 1.12%), por lo que el programa de cómputo propuesto resulta ser una alternativa viable en el dimensionamiento de sistemas hidráulicos que conducen agua a presión.

21 October 2022 in Water
Verified
Journal Article
Open access
PDF file
CBCarlos Bautista-Capetillo
Carlos Bautista-Capetillo
GGGeorgia Aralú González-Pérez
Georgia Aralú González-Pérez
HBHiram Badillo-Almaraz
Hiram Badillo-Almaraz
ALAldo López-Valle
Aldo López-Valle
Civilizations have been able to bloom because of the way they have been historically associated with water resources, especially in seeking strategies to ensure a supply to diverse sectors that require them. Thus, challenges in satisfying water demand are shaped by the particular epoch and geographical area. In this sense, Roman engineering represents a new view of waterworks construction. Above all, it concerns building arched structures to convey water from supply sources to cities; even the hydraulic technology developed by Romans would transcend beyond the time this empire ruled the world. Consequently, this paper shows a brief outlook of some hydraulic systems in Asia, Europe and America settled thousands of years ago. Additionally, a historiographic approach is made for several aqueducts built within the limits that currently constitute the state of Zacatecas during colonial times and independent Mexico in order to evaluate their transcendence for mining, agriculture, and cattle. In addition to the allusion to historical context, the main goal has been to evaluate the hydraulic design of eight olden aqueducts based on current engineering approaches, with the purpose of typifying coincidences between constructive procedures inherited from Roman culture and those used by Spanish conquerors to erect similar civil works in this region.

1 January 2019
Verified
Book Chapter
Closed access
PDF file
HBHiram Badillo-Almaraz
Hiram Badillo-Almaraz
AOAgustín Orduña-Bustamante
Agustín Orduña-Bustamante
OQOctavio Quintero-Sifuentes
Octavio Quintero-Sifuentes
JOJusto Orozco-Rojas
Justo Orozco-Rojas