This article reports a study of flame retardancy and thermal and mechanical properties of wood-plastic composites (WPCs) based on high-density polyethylene and pine flour. The study shows that sample composition plays an important role in WPCs' properties. The influence of additives like fillers (SiO₂ or CaCO₃) and flame retardants ammonium polyphosphate (APP) and pentaerythritol (PER) on WPCs' properties has been considered. The best properties are shown in samples using SiO₂ as filler and treated with the intumescent fire retardant APP/PER. Such samples have excellent fire retardancy with V-0 rating (UL-94 test) and imply that APP/PER fire retardant ensures effective fire retardancy for WPCs.

This work demonstrates the poly(ethylene terephthalate) (PET) washing process, which is the very important step in the overall PET recycling procedure. The samples of waste PET bottles were washed in sodium hydroxide at two different temperatures, that is, at 70 and 75°C, at a time intervals of 15 and 30 min. The cleaning efficiency of the washing processes was determined through the identification of the residual impurities and products of PET degradation. The samples before and after the washing procedure were characterized by gas chromatography/mass spectrometry (GC/MS), gel permeation chromatography, thermogravimetric analysis and differential scanning calorimetry. Due to low obtained oligomer molecular masses, it can be concluded that the degradation during all washing processes is not strong. Results show good purity of washed PET, especially at 75°C, due to very low content of adhesives, toxic compounds and formed monomers. The washing process carried out at 75°C for 15 min can be considered as the most successful. It results with low polymer degradation and the removal of the high quantity of contaminants in short time interval.

Offset printed paperboard coated with polycaprolactone (PCL) polymer and nanoparticles was studied to elucidate the interactions and adhesion in two-layered packaging material. SiO₂, Al₂O₃ and ZnO nanoparticles were used due to their specific interactions with water vapour that results in inhibition of water permeability. The good dispersion of nanoparticles in PCL matrix is crucial for enhancement of the barrier properties of coated paperboard. To gain an insight into the interactions between the nanoparticles, paperboard and PCL matrix determination of surface parameters was performed. The samples were characterized for water vapour permeability, mechanical and thermal properties. Their morphology was analysed by SEM microscopy, FTIR and UV/Vis spectroscopy. UV stability of the PCL nanocomposites coatings was also studied. It can be concluded that the nanoparticles have a significant effect on the surface properties and they influenced adhesion between paperboard and PCL coating.

Due to the intensive search for new types of advanced polymer materials for targeted applications, this work offers insight into the properties of low-density polyethylene/hematite composites. The specific feature of this study lies in the use of elongated hematite particles of different shapes. Uniform ellipsoid-, peanut- and rod-shaped hematite particles were hydrothermally synthesized and incorporated into the polymer matrix of low-density polyethylene (LDPE). LDPE/hematite composites are prepared by melt mixing. Hematite particles are characterized by scanning electron microscopy (SEM) and powder X-ray diffraction (PXRD). The pure LDPE polymer and LDPE/hematite composites were studied by FT-IR and UV-Vis-NIR spectroscopy and by thermogravimetric analysis (TGA). The determination of the mechanical and barrier properties was also carried out. The obtained results indicate the influence of the elongated particles on the improvement of LDPE properties. An increase in thermal stability and UV-absorption was observed as well as the improvement of mechanical and barrier properties. The improvement of the composites’ properties in comparison to the pure LDPE is especially visible in the composites prepared with low content of hematite (0.25%). LDPE/hematite composites have promising characteristics for application as packaging materials with enhanced mechanical, thermal and barrier properties as well as UV-protective materials.