An alternate use of PEAI for enhancing the performance of inverted perovskite solar cells is demonstrated, by employing it as an anti-solvent during the perovskite fabrication process. The results show an enhancement of the open-circuit voltage as compared to the PEAI post treatment.
Effective passivation of defects is an important step toward achieving highly efficient and stable Perovskite Solar Cells (PSCs). In this work, we introduce the incorporation of two different octylammonium based spacer cations as 2D perovskite passivation layers, namely Octylammonium Bromide (OABr) and octylammonium iodide. PSCs with OABr as a 2D passivation layer demonstrated an enhanced Power Conversion Efficiency (PCE) of 21.40% (the control device has a PCE of 20.26%), resulting in a higher open circuit voltage of 40 mV. The 2D perovskite passivation layers lead to a smoother interface and a better contact with the hole transport layer, while transient photoluminescence and transient photovoltage measurements indicated reduced non-radiative recombination. Unencapsulated devices retained almost 90% of their initial PCE after 500 h of exposure under high ambient humidity conditions, confirming that the surface passivation treatment has led to improved device stability.
15 November 2023 in ACS Applied Electronic Materials
Liquid-phase exfoliated molybdenum disulfide (MoS₂) and tungsten disulfide (WS₂) nanosheets were developed as efficient and scalable hole transport layers (HTLs) for organic photovoltaic (OPV) devices. Few-layer WS₂ and MoS₂ were successfully exfoliated via ultrasonication and incorporated into OPVs using spray-deposition. Comprehensive characterization confirmed the high purity and nanoscale integrity of the exfoliated materials. OPVs with WS₂ and MoS₂ HTLs achieved superior performance under both standard AM 1.5G and indoor (LED 1000 lx) illumination. WS₂-based devices demonstrated the highest power conversion efficiencies (PCEs) of 15.6% (AM 1.5G) and 31.6% (LED 1000 lx), while MoS₂-based devices reached 15.1% and 29.7%, respectively, outperforming PEDOT:PSS-based devices (14.9% and 24.9%). These improvements were linked to enhanced charge transport and reduced recombination losses enabled by the TMD-based HTLs. Stability testing showed that MoS₂-based devices retained 85% of their initial PCE after 1000 h under ambient conditions, compared to 80% for WS₂ and 55% for PEDOT:PSS. AFM analysis revealed that TMD HTLs created smoother active layer surfaces, reducing recombination sites and boosting efficiency. This work highlights the potential of WS₂ and MoS₂ as high-performance, stable, and scalable HTLs, offering significant advantages over PEDOT:PSS for both outdoor and indoor OPV applications.
In this study, we explored the potential of exfoliated transition metal dichalcogenides (TMDs) as innovative spray-coated hole transport layers (HTLs) in organic photovoltaics (OPVs), addressing the need for efficient and stable materials in solar cell technology. This research was motivated by the need for alternative HTLs that can offer enhanced performance under varying lighting conditions, particularly in indoor environments. Employing UV-visible absorption and Raman spectroscopy, we characterized the optical properties of MoS2, MoSe2, WS2, and WSe2, confirming their distinct excitonic transitions and direct bandgap features. The nanocrystalline nature of these TMDs, revealed through XRD patterns and crystallite size estimation using the Scherrer method, significantly contributes to their enhanced physical properties and operational efficiency as HTLs in OPVs. These TMDs were then integrated into OPV devices and evaluated under standard solar and indoor lighting conditions, to assess their effectiveness as HTLs. The results demonstrated that MoS2, in particular, displayed remarkable performance, rivalling traditional HTL materials like MoO3. It maintained high power conversion efficiency across a spectrum of light intensities, illustrating its versatility for both outdoor and indoor applications. Additionally, MoS2 showed superior stability over extended periods, suggesting its potential for long-term usage in OPVs. This study contributes significantly to the field of photovoltaic materials, presenting TMDs, especially MoS2, as promising candidates for efficient and stable OPVs in diverse lighting conditions, thereby broadening the scope of solar cell applications.