SRINIVASA BHUKYA

Dr. SRINIVASA BHUKYA


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 January 2023 in Metals
Verified
Journal Article
Open access
PDF file
JMJoseph Maniscalco
Joseph Maniscalco
AEA.A Elmustafa
A.A Elmustafa
SBSRINIVASA BHUKYA
SRINIVASA BHUKYA
ZWZhenhua Wu
Zhenhua Wu
In this research effort, we explore the use of a donor material to help heat workpieces without wearing the tool or adding more heat than necessary to the system. The donor material would typically be a small piece (or pieces) of material, presumably of lower strength than the workpiece but with a comparable melting point. The donor, a sandwich material, is positioned between the tool head and the material to be welded, where the tool initially plunges and heats up in the same manner as the parent material that is intended for welding. The donor material heats up subsequent to tool penetration due to friction and as a result heats up the material beneath it. This preheating technique softens the harder parent material, which helps to minimize tool wear and produce better weld performance. The goal is to investigate the use of the donor material as a preheating technique that minimizes wear and tear on the tool head without negatively impacting the structural properties of the weld. To demonstrate the donor material concept, a combination of Cu-Al, Cu-1045 Carbon steel (CS), and Al-1045 CS sets of donor and parent materials were used in the simulation, in addition to control samples Al-Al and CS-CS. We simulated two thicknesses of donor material 25 and 50% of the parent material thickness, respectively. The simulation suggests that the donor material concept generates phenomenal results by reducing the temperature and axial forces for the friction stir welding of aluminum AA6061 and carbon steel 1045. It also assists downstream during welding, resulting from frictional mechanical work which is converted into stored heat.

30 April 2024 in Metals
Verified
Journal Article
Open access
PDF file
AAAiman Al-Allaq
Aiman Al-Allaq
JMJoseph Maniscalco
Joseph Maniscalco
SBSRINIVASA BHUKYA
SRINIVASA BHUKYA
ZWZhenhua Wu
Zhenhua Wu
AEA.A Elmustafa
A.A Elmustafa
This study presents an optimization of the process parameters for the effect of copper (Cu) donor material percentage on the friction stir welding (FSW) of AA6061-T6 alloy. Extensive factorial experiments were conducted to determine the significance of the rotational speed (ω), the transverse speed (v), the interface coefficient of friction (μ), and the Cu donor material percentage in the plunge, left, right, and downstream zones. Design Expert 13 software was used to identify the number of simulation experiments to be conducted using the Abaqus simulation software. From Design Expert 13, which is a thorough multi-objective optimization analysis software, we were able to identify ideal welding parameters such as a rotational speed of 1222 rpm, transverse speed of 1.1 mm/s, the coefficient of friction of 0.9, and a 19% donor material percentage for the plunge zone. Significant findings demonstrate that increasing the Cu donor material substantially reduced the temperature from 502 °C to 134 °C when the Cu content is increased from 0% to 50%. This integrated modeling and optimization approach provides a practical procedure to identify the best experimental parameters for the process and a new understanding to guide advances for high-quality FSW of aluminum alloys. This work offers a methodology for optimizing the FSW parameters aligned with multifaceted thermomechanical physics.