Laser-assisted synthesis of MoS₂ on 3D porous graphene foam (LIG/MoS₂) behaves as a highly efficient and durable H₂ evolution reaction electrocatalyst under alkaline condition. It merely needs 130 mV of overpotential to achieve a current density of 10 mA cm⁻² in 1.0 M KOH.

Mustard gas, a representative of blister agents, poses a severe threat to human health. Although the structure of 2-chloroethyl ethyl sulfide (2-CEES) is similar to mustard gas, 2-CEES is non-toxic, rendering it a commonly employed simulant in related research. ZnFe₂O₄-based semiconductor gas sensors exhibit numerous advantages, including structural stability, high sensitivities, and easy miniaturization. However, they exhibit insufficient sensitivity at low concentrations and require high operating temperatures. Owing to the effect of electronic and chemical sensitization, the gas-sensing performance of a sensor may be remarkably enhanced via the sensitization method of noble metal loading. In this study, based on the morphologies of ZnFe₂O₄ hollow microspheres, a solvothermal method was adopted to realize different levels of Au loading. Toward 1 ppm of 2-CEES, the gas sensor based on 2 wt.% Au-loaded ZnFe₂O₄ hollow microspheres exhibited a response sensitivity twice that of the gas sensor based on pure ZnFe₂O₄; furthermore, the response/recovery times decreased. Additionally, the sensor displayed excellent linear response to low concentrations of 2-CEES, outstanding selectivity in the presence of several common volatile organic compounds, and good repeatability, as well as long-term stability. The Au-loaded ZnFe₂O₄-based sensor has considerable potential for use in detecting toxic chemical agents and their simulants. Graphical abstract

Sarin is an extremely toxic and fast-acting chemical warfare nerve agent that poses a serious threat to human health, necessitating the development of appropriate sensing technologies. Dimethyl methylphosphonate (DMMP), which has a chemical structure similar to that of sarin but is non-toxic, is often used as a simulation agent in related research. Among promising gas-sensing materials, CuFe₂O₄ exhibits suitable thermal stability. It is easily produced and has low toxicity. Its performance can be enhanced using heterogeneous ion doping to increase the number of surface defects and content of adsorbed oxygen. Therefore, a solvothermal method was adopted in this study to prepare CuFe₂O₄ hollow microspheres that were subsequently doped with different ratios of Sn⁴⁺ or Sn²⁺. Detailed characterizations of the obtained materials were conducted, and the corresponding CuFe₂O₄-based gas sensors were fabricated. Their gas-sensing performance against DMMP was studied to analyze and discuss the gas-sensing and sensitization mechanisms associated with Sn⁴⁺ and Sn²⁺ doping. The CuFe₂O₄-based sensor doped with 2 mol% Sn²⁺ exhibited excellent gas-sensing performance in response to a 1 ppm concentration of DMMP, with response and recovery times of 12 and 63 s, respectively. Notably, its response to 1 ppm DMMP (16.27) was 3.3-fold higher than that to 1 ppm 2-CEES (4.98). The doped CuFe₂O₄ sensor exhibited superior response–recovery characteristics and enhanced moisture resistance compared to the undoped sensor.