A fast responsive two-dimensional/three-dimensional (2D/3D) switchable display is demonstrated based on an active liquid crystal (LC) microlens array and a twisted nematic (TN) cell. Compared with the traditional LC microlens array, the fabricated LC microlens array has more ideal phase profile and better focusing effect. The TN cell can switch the polarization direction of the incident light with a very short switching time (4.3 ms) and a small driving voltage ( 5 V r m s ). By introducing the tilted elemental image arrays and tilted LC lens array, the moiré patterns are eliminated. The fast switching of the 2D/3D display can be realized by applying or removing voltage to the TN cell. The fast responsive 2D/3D switchable display with the LC microlens array and the TN cell is thin and compact without moiré pattern compared with other 2D/3D switchable display devices.

We propose a multi-view 2D/3D switchable display by using cylindrical liquid crystal (LC) lens array with a low operating voltage and fast response time. The cylindrical LC lens array is composed of three parts: the LC layer, a top-plane indium tin oxide (ITO) electrode, and bottom periodic strip ITO electrodes. In the voltage-off state, the cylindrical LC lens array is equivalent to a transparent glass substrate and the viewers can see a clear 2D image. In the 3D mode, the cylindrical LC lens array can be used as a cylindrical lens array under a suitable operating voltage. As a result, the 2D and 3D images can be switched according to the state of the cylindrical LC lens array. The experimental result shows that the 2D/3D switchable display with the cylindrical LC lens array has a wider viewing angle, has no moiré pattern, and is much thinner compared to the other 2D/3D switchable display devices.

A liquid crystal (LC) lenticular lens array with auxiliary electrodes is proposed. The introduction of the auxiliary electrodes helps to obtain an LC lens array (LCLA) with relatively large aperture without complex structures. When the LCLA is in the focusing state, the voltage of auxiliary electrodes is less than that of edge electrodes, and the generated electric field in the LCLA can penetrate into the LC layer. Therefore, the ideal phase profile is obtained with a relatively thin LC layer thickness. Experimental results show that the LCLA has the characteristics of high optical power and low operation voltage. Based on the proposed LCLA, a multi-view 2D/3D switchable display is realized. In the experiment, a series of parallax images is obtained by rotating the sample to replace the convergence shooting method for 3D imaging. Compared with other 2D/3D switchable display devices, the multi-view 2D/3D switchable display based on the LCLA is characterized by being thin and compact, and displaying no moiré pattern.

A polarisation-independent and low-voltage-driven two-dimensional blue phase liquid crystal (BPLC) microlens array is proposed. The pixel electrode of the microlens array is composed of planar hole-patterned electrode and square electrode. Combined with composite dielectric layer and planar common electrode, a two-dimensional microlens array is realised. When the same driving voltage is applied to the hole-patterned electrode and square electrode, the longitudinal electric field with gradient distribution will be generated in the BPLC layer, which facilitates the polarisation-independent properties of the microlens array. At the same time, the dielectric layer with high dielectric coefficient used in the microlens array helps to achieve its low driving voltage. Additionally, this design has the advantages of ideal phase profile, fast response time and easy manufacturing process. ABSTRACT