Sustainable ammonia is one of the leading candidates in the search for alternative clean fuels for marine applications. This paper aims to build a simulation model of a six-cylinder, four-stroke diesel engine to investigate the effects of increasing the ammonia proportion in methanol–ammonia fuel blends on engine performance and emissions. In the present study, the conditions of different speeds and different proportions of ammonia in fuel blends are investigated. The results show that the average effective pressure, brake power, and brake torque increase by about 5% with an increased ammonia substitution ratio. In terms of economic performance, the changes under medium and low speed conditions are not obvious. However, the change in high speed conditions is significant. The brake specific fuel consumption (BSFC) is reduced by 6.6%, and the brake thermal efficiency (BTE) is increased by 4%. It is found that the performance of the engine is best at medium speed. The best performance is achieved with higher efficiency and lower emissions. The present results can provide guidance for the optimization of ammonia–methanol blends and their applications in engines.

Surface plasmon resonance (SPR) is widely used as light trapping schemes in solar cells, because it can concentrate light fields surrounding metal nanostructures and realize light management at the nanoscale. SPR in photovoltaics generally occurs at the metal/dielectric interfaces. A well-defined interface is therefore required to elucidate interfacial SPR processes. Here, we designed a photovoltaic device (PVD) with an atomically flat TiO₂ dielectric/dye/graphene/metal nanoparticle (NP) interface for quantitatively studying the SPR enhancement of the photovoltaic conversion. Theoretical and experimental results indicated that the graphene monolayer was transparent to the electromagnetic field. This transparency led to significant substrate-induced plasmonic hybridization at the heterostructure interface. Combined with interparticle plasmonic coupling, the substrate-induced plasmonics concentrated light at the interface and enhanced the photo-excitation of dyes, thus improving the photoelectric conversion. Such a mechanistic understanding of interfacial plasmonic enhancement will further promote the development of efficient plasmon-enhanced solar cells and composite photocatalysts.