The surface charge accumulation is very likely to trigger the surface flashover, which limits the large-scale application of DC GIL/GIS. This article comprehensively reviews the effect of six factors, including insulator-electrode shape, surface roughness of the insulator and conductor, metal particles, temperature, humidity, and gas type, on the insulator surface charging property. Furthermore, three models i.e. ‘analogous ineffective region’ expansion model, charge cluster triggered surface flashover model, and synergistic model of adsorbed gas, revealing the mechanism of charge triggered surface flashover phenomenon are reviewed and discussed. Future work from the perspective of theoretical analysis and engineering application are suggested in this field.

The winding is the core component of a transformer, and the technology used to diagnose its current state directly affects the operation and maintenance of the transformer. The mechanical vibration characteristics of a dry-type transformer winding are studied in this paper. A short-circuit test was performed on an SCB10-1000/10 dry-type transformer, and the vibration signal at the surface was measured. Based on actual experimental conditions, a vibration-simulation model of the transformer was established using COMSOL Multiphysics software. A multiphysics coupling simulation of the circuit, magnetic field, and solid mechanics of the transformer was performed on this model. The simulation results were compared with measured data to verify the validity of the simulation model. The simulation model for a transformer operating under normal conditions was then used to develop simulation models of transformer-winding looseness, winding deformation, and winding-insulation failure, and the winding fault vibration characteristics were analyzed. The results provide a basis for detecting and analyzing the mechanical state of transformer windings.

Due to the fact that the external disturbances are unavoidable in nonlinear microgrids (MGs) systems, which could induce the oscillate of controller, leading to the excessive line loss, and the nonlinear could also result in the controller design difficulty in MGs. Therefore, based on the distributed consensus algorithm of multi-agent systems, this paper studies the distributed voltage recovery consensus optimal control problem for the MGs with nonlinear item and external disturbances. Firstly, the distributed secondary voltage restoration consensus control problem can be transformed into a distributed zero-sum (ZS) differential game problem of the voltage restoration consensus tracking error dynamics via applying the adaptive command-filtered backstepping technique, in which the auxiliary system and neural networks (NNs) are introduced to solve the unknown nonlinearities and external disturbances. Subsequently, the distributed voltage restoration consensus optimal control protocol is constructed via ZS differential game algorithm to achieve the voltage recovery of island MGs, in which a critic network is proposed to estimate the associated cooperative cost function online with a designed weight update law. Further, the consensus optimal control protocol proposed not only ensures the cooperative cost function to be minimized, but also ensures in the closed-loop systems all signals to be cooperatively uniformly ultimately bounded (CUUB). In addition, based on the Lyapunov stability theory, it is proved that the voltage recovery synchronization error can converge to an arbitrarily small range near the origin. Finally, simulation results verify the effectiveness of the proposed controller in island MG.

Polyimide (PI) is widely used in aerospace applications due to its excellent properties. However, the high concentration of atomic oxygen (AO) in low-earth orbit (LEO) significantly degrades its performance. This study employs reactive molecular dynamics (MD) simulations to analyze the AO erosion resistance of fluorinated polyimide (FPI) and polyhedral oligomeric silsesquioxane (POSS) composite polyimide models. The 35 ps simulation results indicate that the PI/POSS composite exhibits the best protective performance. The protection mechanism involves the formation of an SiO₂ carbonized layer that prevents the transmission of AO and heat to the polyimide matrix, resulting in a normalized mass of 84.1% after erosion. The FPI model shows the second-best protective effect, where the introduction of -CF₃ groups enhances the thermal stability of the polyimide matrix, resulting in a normalized mass of 80.7% after erosion. This study explores the protective effects and mechanisms of different polyimide protection methods at the molecular level, providing new insights for the design of AO erosion protection systems.