In recent years, optical fibers have found extensive use in special environments, including high-energy radiation scenarios like nuclear explosion diagnostics and reactor monitoring. However, radiation exposure, such as X-rays, gamma rays, and neutrons, can compromise fiber safety and reliability. Consequently, researchers worldwide are focusing on radiation-resistant fiber optic technology. This paper examines optical fiber radiation damage mechanisms, encompassing ionization damage, displacement damage, and defect centers. It also surveys the current research on radiation-resistant fiber optic design, including doping and manufacturing process improvements. Ultimately, it summarizes the effectiveness of various approaches and forecasts the future of radiation-resistant optical fibers.

Recent advancements in tritium separation technologies have significantly improved efficiency, particularly through the integration of vapor phase catalytic exchange (VPCE), liquid phase catalytic exchange (LPCE), and combined electrolysis catalytic exchange (CECE) methods. Combining these techniques overcomes individual limitations, enhancing separation efficiency and reducing energy consumption. The CECE process, which integrates electrolysis with catalytic exchange, offers high separation factors, making it effective for high-concentration tritiated water treatment. Solid polymer electrolyte (SPE) technology has also gained prominence for its higher efficiency, smaller equipment size, and longer lifespan compared to traditional alkaline electrolysis. While electrolysis offers high separation factors, its high energy demand limits its cost-effectiveness for large-scale operations. As a result, electrolysis is often combined with other methods like CECE to optimize both energy consumption and separation efficiency. Future research will focus on improving the energy efficiency of electrolysis for large-scale, low-cost tritiated water treatment.

Iodine is one of the key elements that must be removed from the off-gas systems of nuclear fuel reprocessing. This study systematically investigates the iodine vapor adsorption performance of the metal–organic framework (MOF) material HKUST-1(1-(2-methyl-4-(2-oxopyrrolidin-1-yl)phenyl)-3-morpholino-5,6-dihydropyridin-2(1H)-one), with particle sizes of 100 nm and 20 μm. HKUST-1 samples with varying particle sizes were synthesized via a hydrothermal method. The experimental results show that the 20 μm HKUST-1 exhibits superior crystallinity, a more intact pore structure, and a higher iodine adsorption capacity, reaching 700 mg/g, which is significantly greater than the 300 mg/g capacity of the 100 nm HKUST-1. Kinetic analysis reveals that the adsorption process follows the pseudo-second-order model, with physical adsorption as the predominant mechanism, where iodine molecules are accommodated within the pores. FTIR and XRD further confirm the structural stability of the HKUST-1 framework after iodine adsorption. However, desorption experiments show that iodine molecules are easily volatilized into the air, with a 20% weight loss observed within 10 h and a color change from black to green. The results provide experimental evidence for optimizing the application of HKUST-1 materials in iodine capture and suggest that material modification could enhance the long-term stability of iodine fixation.

Hydroxylamine nitrate (HAN) and hydrazine nitrate (HN) are commonly found in radioactive waste solutions in nuclear fuel reprocessing, and their efficient removal is essential for waste treatment processes. In this study, six activated carbon carriers were selected to prepare Ru/AC catalysts for the simultaneous catalytic decomposition of HAN and HN, with the aim of exploring the effect of carrier properties on catalytic performance. The catalyst’s activity was evaluated in a batch reaction unit, and its structural properties were characterized using N₂ physical adsorption, XRD, SEM, and TEM techniques. The results revealed that the catalyst’s activity was primarily determined by the carrier’s particle size and specific surface area. Additionally, corrosion-induced damage to the pore structure and Ru loss were identified as the main factors responsible for catalyst deactivation. This study highlights the importance of optimizing carrier structure to enhance the activity and stability of Ru/AC catalysts.

The cladding of fast reactor fuel rods, made of stainless steel, presents significant challenges in cutting due to its ductility, which leads to increased tool wear and poor cut quality with traditional mechanical methods. Laser cutting has emerged as a superior alternative, offering non-contact precision, high efficiency, and suitability for radioactive environments. This study systematically investigates the effects of laser cutting parameters—cutting speed, focal position, power, and gas pressure—on the cutting quality of simulated fast reactor fuel rods. The results show that optimal cutting is achieved with a cutting speed of 1 m/min, a focal position between − 20 and − 25 mm, a laser power between 7200 and 9600 W, and a gas pressure of 10 MPa. These parameters provide the best balance between cutting efficiency, surface roughness, and minimal slag formation. This study contributes valuable insights into optimizing laser cutting technology for nuclear fuel rod processing, with potential applications in fuel reprocessing and decommissioning.

Fast-neutron reactors are an important representative of Generation IV nuclear reactors, and due to the unique structure and material properties of fast reactor fuel, traditional mechanical cutting methods are not applicable. In contrast, laser cutting has emerged as an ideal alternative. However, ensuring the stability of optical fibers and laser cutting heads under high radiation doses, as well as maintaining cutting quality after irradiation, remains a significant technical challenge. Here, we study the performance changes in optical fibers exposed to a total radiation dose of 10⁵ Gy, focusing on power transmission and thermal characteristics. By integrating irradiated optical fibers with irradiated laser cutting heads, simulated cutting experiments on the hexagonal tubes of spent fuel from fast reactors (fast reactor simulation assembly) were conducted. Critical cutting quality parameters, including kerf width, surface roughness, and slagging length, were analyzed. The results indicate that, while the power transmission performance of irradiated optical fibers shows slight degradation, its impact on cutting quality is minimal. High-quality cutting can still be achieved under optimized parameters. This study confirms the feasibility of laser cutting technology in high-radiation environments and provides essential technical support for its application in nuclear fuel reprocessing.