The intermittence of the shape detection signal associated with an entire roller-embedded shapemeter roll, used in a seven-pass cold reversible rolling process, is considered. A transient interference at the sensor top surface and the distance between the sensor top surface and the roll outer surface are developed, and a sensor reliability evaluation model is derived. The reliability of the sensor is evaluated via the random perturbation method, and the reliability sensitivity of design variables is proposed. The analysis reveals that the reliability is smallest in the third rolling pass. Of the design variables considered, the initial interference exhibits the largest reliability sensitivity and has the greatest influence on the sensor reliability. A reliability robust design model of the initial interference is therefore developed. A new shapemeter roll is fabricated and tested in a 1050 reversible cold rolling mill. The test results are consistent with the theoretical results, thereby validating the proposed model. The selection of an appropriate initial interference provides an important means of overcoming the adverse effects associated with the thermal deformation of sensor contact surfaces.
16 December 2016 in The International Journal of Advanced Manufacturing Technology
Based on the design requirements for prestressed concrete cylinder pipe port-grinding equipment, a self-propelled, a kind of high-efficiency port-grinding robot was innovatively designed. A pre-pressure model of the robot in the non-slip state during the grinding process was developed, and the finite-element simulation analysis of the robot was completed to further verify the reliability of the robot during grinding process. A grinding depth model was established based on Hertz contact and removal profile theory. The relationships between the grinding depth and the grinding motor power, grinding motor rotation speed, rotation speed of the drive motor, and grinding wheel radius were studied, and field grinding tests were performed. The grinding test results showed that grinding depth increases with increasing grinding motor power and decreases with increasing grinding motor speed, driving motor speed, and grinding wheel radius. The test results were used to verify the accuracy of the grinding depth prediction model. Through finite-element simulation analysis of the pipe, the influence of the port-grinding depth on the port strength is further verified. The analysis results lay the foundation for improving the grinding accuracy and grinding depth reliability of a grinding robot.
4 August 2026 in Journal of the Brazilian Society of Mechanical Sciences and Engineering