This study investigates the efficacy of adsorbents from locally sourced olive waste—encompassing olive skins, leaves, and pits, recovered from the initial centrifugation of olives (OWP)—and a composite with sodium alginate (OWPSA) for the removal of Cu2+ ions from synthetic wastewater. Experimental analyses conducted at room temperature, with an initial Cu2+ concentration of 50 mg/L and a solid/liquid ratio of 1 g/L, showed that the removal efficiencies were approximately 79.54% and 94.54% for OWP and OWPSA, respectively, highlighting the positive impact of alginate on adsorption capacity. Utilizing statistical physics isotherm models, particularly the single-layer model coupled to real gas (SLMRG), allowed us to robustly fit the experimental data, providing insights into the adsorption mechanisms. Thermodynamic parameters affirmed the spontaneity and endothermic nature of the processes. Adsorption kinetics were interpreted effectively using the pseudo-second-order (PSO) model. Molecular modeling investigations, including the conductor-like screening model for real solvents (COSMO-RS), density functional theory (DFT), and atom-in-molecule (AIM) analysis, unveiled intricate molecular interactions among the adsorbent components—cellulose, hemicellulose, lignin, and alginate—and the pollutant Cu2+, confirming their physically interactive nature. These findings emphasize the synergistic application of experimental and theoretical approaches, providing a comprehensive understanding of copper adsorption dynamics at the molecular level. This methodology holds promise for unraveling intricate processes across various adsorbent materials in wastewater treatment applications.
In this study, a new eco-friendly kaolinite–cellulose (Kaol/Cel) composite was prepared from waste red bean peels (Phaseolus vulgaris) as a source of cellulose to serve as a promising and effective adsorbent for the removal of crystal violet (CV) dye from aqueous solutions. Its characteristics were investigated through the use of X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and zero-point of charge (pHpzc). The Box–Behnken design was used to improve CV adsorption on the composite by testing its primary affecting factors: loading Cel into the composite matrix of Kaol (A: 0–50%), adsorbent dosage (B: 0.02–0.05 g), pH (C: 4–10), temperature (D: 30–60 °C), and duration (E: 5–60 min). The significant interactions with the greatest CV elimination efficiency (99.86%) are as follows: BC (adsorbent dose vs. pH) and BD (adsorbent dose vs. temperature) at optimum parameters (A: 25%, B: 0.05 g, C: 10, D: 45 °C, and E: 17.5 min) for which the CV’s best adsorption capacity (294.12 mg/g) was recorded. The Freundlich and pseudo-second-order kinetic models were the best isotherm and kinetic models fitting our results. Furthermore, the study investigated the mechanisms responsible for eliminating CV by utilizing Kaol/Cel–25. It detected multiple types of associations, including electrostatic, n-π, dipole–dipole, hydrogen bonding interactions, and Yoshida hydrogen bonding. These findings suggest that Kaol/Cel could be a promising starting material for developing a highly efficient adsorbent that can remove cationic dyes from aqueous environments.
The significant achievements and progress in the field of biomimetic devices, including breakthroughs in research on neural function, neuron designs, prosthetic synapses, and artificial neural programming.
Raw date palm waste was investigated as an adsorbent to remove tetracycline (TC) and ciprofloxacin (CIP) from water. Influence of pH, biosorbent dose, starting antibiotic concentration, contact time, temperature, and concentrations of different salts were examined. The pseudo‐second‐order model provided the best fit to the experimental data, while Langmuir and Dubinin‐Radushkevich isotherms were found to be the most suitable for TC and CIP adsorption at equilibrium, respectively. Thermodynamic parameters indicated that the process is spontaneous and endothermic. These findings suggest that this waste could be a cost‐effective and eco‐friendly adsorbent to remove antibiotics from wastewater.