Yingcong Wang

Dr. Yingcong Wang

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 October 2018 in IEEE Transactions on Electromagnetic Compatibility
Verified
Journal Article
Closed access
QWQuandi Wang
Quandi Wang
WLWanlu Li
Wanlu Li
JKJianwei Kang
Jianwei Kang
YWYingcong Wang
Yingcong Wang
The electromagnetic fields surrounding high-power wireless power transfer (WPT) systems in electric vehicles (EVs) may threaten the electromagnetic safety (EMS) of pedestrians nearby. This paper first evaluates the dosimetry for a 10 kW WPT system for EVs. A total of three human models and a full-size EV model are constructed and used. Numerical computation with the finite element method is implemented for three exposure scenarios of the adult models, including an unexplored and severe one. A child model lying in the same position as the adult model is also evaluated. To satisfy the EMS requirement, the maximum allowable power (MAP) of the WPT system is merely 1.0 kW. Then, three feasible measures are proposed to protect people from the electromagnetic hazards of WPT systems. 1) A safety distance for pedestrians during the normal charging of the system is established. 2) A detailed power control strategy is presented on the basis of the findings regarding the distribution characteristics of the near-field magnetic field of the WPT system. 3) A novel method of detecting the offset distance of a WPT system is proposed, and a small experimental WPT system coupler is developed to verify the method. These measures can effectively alleviate the conflict between the MAP of the system and EMS requirements for people.

1 November 2018 in IET Power Electronics
Verified
Journal Article
Open access
PDF file
QWQuandi Wang
Quandi Wang
YWYingcong Wang
Yingcong Wang
Magnetic coupling resonant‐wireless power transfer (MCR‐WPT) has attracted considerable attention in recent decades. A relay‐coil structure is utilised to extend the transfer distance between the transmitter side (Tx) and receiver side (Rx). This structure increases the complexity of analysing and optimising the operation of the system. The optimal compensatory capacitors of a three‐coil wireless power transfer (WPT) system with a relay coil were investigated based on the transfer efficiency. The WPT system is modelled according to the circuit theory using the magnetic coupling between the Tx and the Rx. The condition to derive the optimal efficiency is deduced into a polynomial equation using only the compensatory reactance of the relay coil. These real solutions are theoretically compared to determine the global optimum. An experimental prototype is implemented, and the experimental results agree well with the calculations.

12 December 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
WLWanlu Li
Wanlu Li
QWQuandi Wang
Quandi Wang
JKJianwei Kang
Jianwei Kang
YWYingcong Wang
Yingcong Wang
Spatial energy distribution characteristics (EDCs) as well as power and efficiency should be considered to ensure electromagnetic safety of people nearby when analyzing some magnetically coupled resonant (MCR) wireless power transfer (WPT) systems, which is difficult for circuit theory. This paper first proposes energy-concentrating effect (ECE) of unit transmitting active power (TAP) based on the EDCs of the system with SS/PS compensation. And we find that the area integral of the active power density on the infinite plane perpendicular to the transmission direction between the coils equals the TAP of the system, which is consistent with the result obtained by circuit theory. Several couplers are designed and optimized based on the ECE. Simulation and experimental results reveal that the optimized inner-outer ring (IOR) and disc-coil couplers increase the ECE by 10% and 32%, respectively, compared with the original spiral-coil coupler. Furthermore, the electromagnetic exposure of the human body in the same position around the three couplers indicates that the maximum induced electric field and specific absorption rate in the human body around the optimized IOR and disc-coil couplers are substantially decreased, and thus the two couplers increase the maximum allowable TAP of the system from 297W to 379W and 700W.

8 August 2018 in IEEE Transactions on Electromagnetic Compatibility
Verified
Journal Article
Closed access
JKJianwei Kang
Jianwei Kang
QWQuandi Wang
Quandi Wang
YWYingcong Wang
Yingcong Wang
WLWanlu Li
Wanlu Li
Magnetic field (MF) analysis in wireless power transfer systems (WPTSs) is one of the key problems. This paper proposes an optimization algorithm to determine the MF by calculating the simplified Biot–Savart integral. The number of intervals (NOIs) in the integral is the key to the accuracy and efficiency of the algorithm. The maximum of the MF changes sharply with NOI, leading to a bad optimal NOI. To solve this problem, two methods are used. First, according to the positions of the maximum, the relatively high value, and the idea of noise-point-elimination in digital image processing, the maximum value filtered method (MVFM) is proposed. The second method is the two-dimensional (2-D) feature selective validation (FSV). By combining the MVFM and the 2D-FSV, on an NOI step equaling to 10, the optimal NOI is decreased from 350 to 90, which significantly meets the balance of the accuracy and efficiency. Furthermore, for a variable NOI step situation, local and global optimal NOIs have been analyzed. MVFM is not only suitable for the MF calculation in WPTSs but also for when the maximum value needs to be addressed. 2D-FSV also expands the application from the final result evaluation to the evaluation in an algorithm.

16 July 2019 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
JKJianwei Kang
Jianwei Kang
QWQuandi Wang
Quandi Wang
YWYingcong Wang
Yingcong Wang
WLWanlu Li
Wanlu Li
Magnetic fields are crucial for wireless power transfer systems (WPTSs) via magnetic coupling. This paper analyzes the polarization characteristic of the magnetic field in WPTS. First, a typical WPTS and its magnetic field are modeled. The magnitude and phase distributions of the magnetic field components are calculated and discussed. By adopting polarization theory, the magnetic field in WPT is analyzed via the polarization characteristic. A unique characteristic is found. Unlike far-field polarization, the characteristic possesses the following points: First, the linear, circular, and elliptical polarization states simultaneously exist in the WPT. Second, linear polarization is the intrinsic polarization state and forms a 3D ellipsoid; circular polarization forms two rings around with the WPTS and changes with the currents. The analysis has also been proved by simulations and experiments.

6 November 2017 in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
Verified
Journal Article
Closed access
QWQuandi Wang
Quandi Wang
YWYingcong Wang
Yingcong Wang
JKJianwei Kang
Jianwei Kang
WLWanlu Li
Wanlu Li
Purpose: The purpose of this paper is to present a monitoring method for a three-coil wireless power transfer (WPT) system, which consists of a transmitting coil (Tx), a relay coil and a movable receiving coil (Rx). Both an ideal resistance and a rectifier bridge load are taken into account. Design/methodology/approach: From the perspective of fundamental component, the equivalent impedance of a rectifier bridge load is well analyzed. On the basis of the circuit model of a three-coil WPT, estimation equations of the variable mutual inductances and load condition are deduced. Multi-frequency input impedance obtained by frequency scans combined with the Newton-Raphson method are used to obtain solutions. Findings: Experimental results indicate that the estimated parameter values are close to each other when different sets of source frequencies are applied. When compared with simulation results, these estimated parameters including both mutual inductances and load resistances are found to be accurate. Originality/value: Using only the information of input side, the proposed algorithm can estimate the mutual inductances and load resistance regardless of the Rx positions. Estimation is feasible for the system with a rectifier bridge load. The estimated analysis will serve as a key step in load power stabilization for WPT systems.