Traction electric machines in electrified mobility are constrained by limited supply voltage and critical materials. Active winding reconfiguration (AWR) changes the winding connection during operation to improve voltage utilization and field-weakening (FW) capability. However, general design rules for AWR remain limited. This work extends the characteristic-current-based normalized parameter-plane framework to AWR via topology-dependent reconfiguration factors and evaluates the resulting torque-speed-power behavior over the design space. The analytical model is compared against finite-element analysis of six baseline machines and test-bench measurements from one machine. Normalized characteristic current is the dominant design parameter, capturing the balance between magnetic and current loading, while saliency and the reconfiguration factor set the magnitude of the benefit. Figures of merit are defined to quantify reconfiguration benefit across peak performance, crossover points, torque-speed envelopes, and part-load performance. Across these figures of merit, three explicit thresholds for normalized characteristic current are analytically derived and identified. Below the lowest threshold, designs such as synchronous reluctance and ferrite-assisted machines gain up to four times higher constant power speed range and 40% higher peak power, based on the analytical model. Above it and up to the middle threshold, conventional rare-earth traction machines gain mainly in part-load efficiency instead. Above the highest threshold, narrow-FW designs gain mainly in speed-range extension. These thresholds provide generalized, geometry-independent early-stage AWR screening for traction machine concepts.
Traction electric machines in electrified mobility are constrained by limited supply voltage and critical materials. Active winding reconfiguration (AWR) changes the winding connection during operation to improve voltage utilization and field-weakening capability. However, general design rules for AWR remain limited. This work extends the characteristic-current-based normalized parameter-plane framework to AWR via topology-dependent reconfiguration factors and evaluates the resulting torque-speed-power behavior over the design space. The analytical model is compared against finite-element analysis of six baseline machines and test-bench measurements from one machine. Normalized characteristic current is the dominant design parameter, capturing the balance between magnetic and current loading, while saliency and the reconfiguration factor set the magnitude of the benefit. Figures of merit are defined to quantify reconfiguration benefit across peak performance, crossover points, torque-speed envelopes, and part-load performance. Across these figures of merit, three explicit thresholds for normalized characteristic current are identified. Below the lowest threshold, designs such as synchronous reluctance and ferrite-assisted machines gain of up to four times higher constant-power over speed range (CPSR) and 40% higher peak power. Above it and up to the middle threshold, conventional rare-earth traction machines gain mainly in part-load efficiency instead. Above the highest threshold, narrow-field-weakening designs gain mainly in speed-range extension. These thresholds provide generalized, geometry-independent early-stage AWR screening for traction machine concepts.
DC offsets, odd harmonics and even harmonics are unavoidable in PMSM drives, which affect the performance of sensorless control for PMSM drives. To resolve this problem, a novel sensorless control is proposed in this paper. It makes use of the basic trigonometric function and arithmetic operation between multiple consecutive sampled signals to estimate the speed and has the ability to suppress DC offsets, odd harmonic and even harmonic. The proposed method is composed of nonlinear flux observer (NFO), zero crossing detection (ZCD) module and adaptive multiple-consecutive-samples frequency estimation (AMCS-FE) module. NFO is used to observe rotor flux, ZCD module realizes system adaptivity, and AMCS-FE module serves for speed estimation. The simulation results in MATLAB/Simulink demonstrate the feasibility of the proposed method.