Bacterial cellulose is a biomaterial known for its physical and mechanical properties, including its high mechanical strength, water retention capacity, and biocompatibility. Its production from various carbohydrates has been widely studied, aiming to find more efficient and cost-effective culture media. This study investigated the production of bacterial cellulose from agroindustrial asparagus peel waste by Komagataeibacter rhaeticus QK23. A strain of QK23 was isolated and cultivated from a kombucha tea, identified based on morphological and molecular characteristics using the 16S rRNA gene. The waste was hydrolyzed and converted into fermentable sugars. Using the response surface methodology, the inoculum dose (1–20%) and incubation time (3–25 days) were evaluated concerning bacterial cellulose yield. The results demonstrated that with an optimal inoculum dose of 10.5% and an incubation time of 25 days, a production of 2.57 g/L was achieved. It was characterized as similar to type I cellulose, exhibiting a high degree of crystallinity (81.89%) and suitable morphological properties, evidenced by a fiber size of 178 nm and a surface roughness of 27.05 nm. Converting asparagus waste into bacterial cellulose is a sustainable and effective strategy that promotes the development of advanced biomaterials in biotechnology research.
Pollution from crude oil and its derivatives poses a serious threat to human health and ecosystems, with accidental spills causing substantial damage. Biodegradation, using microorganisms to break down these contaminants, presents a promising and cost-effective solution. Exploring and utilizing new bacterial strains from underexplored habitats could improve remediation efforts at contaminated sites. This study aimed to evaluate the hydrocarbon biodegradation capacity of bacteria isolated from agricultural soils in Huamachuco, Peru. Soil samples from Oca crops were collected and bacteria were isolated. Biodegradation assays were conducted using diesel as the sole carbon source in the Bushnell Haas Mineral medium. Molecular characterization of the 16S rRNA gene identified four strains. Diesel biodegradation assays at 1% concentration were performed under agitation conditions at 150 rpm and 30 °C, and monitored on day 10 by measuring cellular biomass (OD600), with hydrocarbons analyzed by gas chromatography. The results showed Pseudomonas protegens (PROM2) achieved the highest efficiency in removing total hydrocarbons (91.5 ± 0.7%). Additionally, Pseudomonas citri PROM3 and Acinetobacter guillouiae ClyRoM5 also demonstrated high capacity in removing several individual hydrocarbons. Indigenous bacteria from uncontaminated agricultural soils present a high potential for hydrocarbon bioremediation, offering an ecological and effective solution for soil decontamination.
Bacterial cellulose (BC) is a pure, crystalline biopolymer with broad applications, though large-scale production remains limited by the high cost of culture media. This study evaluated the use of artichoke bract waste as an alternative substrate for BC production by Komagataeibacter rhaeticus QK23, focusing on culture optimization and physicochemical characterization of the resulting biopolymer. Infrared spectroscopy revealed functional groups characteristic of cellulose, hemicellulose, lignin, and inulin, along with structural sugars (glucose 24%, xylose 5.07%, arabinose 4.96%, galactose 8.81%, and mannose 1.75%). After hydrolysis with H2SO4, up to 11.81 g/L of reducing sugars were released and incorporated into Hestrin–Schramm medium lacking glucose. Using a central composite design, inoculum dose (10–20%) and incubation time (7–14 days) were optimized under static conditions at 30 °C. The highest yield (1.57 g/L) was obtained with 20% inoculum after 14 days. The product corresponded to type I cellulose with a crystallinity index of 81.87%, and AFM analysis revealed a surface roughness of 32.96 nm. The results demonstrate that artichoke hydrolysates are a viable and sustainable source for BC production, promoting agricultural waste valorization and cost reduction in industrial biotechnology.
Chitin, an abundant biopolymer with potential applications in agriculture, medicine, and bioremediation, is conventionally extracted using chemical methods that have environmental disadvantages. This study investigates the extraction of chitin from Litopenaeus vannamei shrimp waste by one-step fermentation using the bacterial strains Pseudomonas aeruginosa QF50 and Serratia sp. QCS23. A total of 4 kg of shrimp waste was treated by fermentation with culture media enriched with different concentrations of glucose (1, 5, and 10%) for 7 days at 25 °C, followed by purification and characterization processes using infrared spectroscopy and X-ray diffraction. The results demonstrated an increase in the yield of crude chitin proportional to the glucose concentration, reaching a maximum of 76.81 ± 7.64% for Pseudomonas aeruginosa QF50 and 71.30 ± 1.16% for Serratia sp. QCS23. Both strains showed high efficiencies in deproteinization (80–87%) and demineralization, with significant improvements especially shown at high glucose concentrations. Structural characterization confirmed the presence of the spectral characteristics of α-chitin, with crystallinity indices of 81% and 71% for chitins obtained with Pseudomonas aeruginosa QF50 and Serratia sp. QCS23, respectively. This study concludes that single-step fermentation with Pseudomonas aeruginosa QF50 and Serratia sp. QCS23 is an effective and sustainable method for the extraction of high-quality chitin from shrimp exoskeleton waste, offering a promising alternative to traditional chemical methods.
En esta investigación se evalúa el impacto ambiental en Baños del Inca. Raydán (2011) detalla el grado de los impactos con lo que es posible evaluar cada uno de ellos, esta investigación se justifica porque permitirá la aplicación de diversas medidas correctivas de mitigación ambiental para mejorar los proyectos de gestión ambiental y saneamiento del agua potable; como principal objetivo se planteó hacer un Estudio de impacto ambiental, para resaltar los efectos y el impacto ya sea positivo o negativo, lo cual afecta a los componentes del medio ambiente y también influye en los habitantes cambiando su estilo de vida, esto es debido a que se encuentran dentro del área de influencia directa del proyecto. La investigación realizada fue con enfoque cuantitativa – no experimental, se utilizaron los siguientes instrumentos: La guía de avistamiento y también la matriz causa-efecto (tomando como base la metodología de Vicente Conesa). En el cual se obtuvo, la importancia, la cual fue negativa, pero también implico la significancia, siendo está moderada en base a los componentes medio ambientales físicos, siendo la calidad del suelo (-24) y biológicos, propiciando una perdida en la cobertura vegetal, teniendo la valoración de (-30), esto nos indica que estos factores se alcanzan a recuperar en un lapso de tiempo dado; en cambio en la parte socioeconómica se produjeron impactos de manera positiva, esto debido al incremento de empleo que tiene un rango de (22) también gracias a la optimización y mejora de los servicios básicos para dicha ciudad y lugares aledaños. DOI: http://dx.doi.org/10.17268/rebiol.2023.43.01.13
El libro "Metodología de la investigación aplicada a la ingeniería química ambiental" ofrece un compendio detallado sobre los fundamentos y aspectos avanzados de la investigación en este ámbito. A lo largo de ocho capítulos, el texto profundiza en temas cardinales, comenzando con el planteamiento del estudio, que guía al lector en la identificación y definición de problemáticas pertinentes en la ingeniería química ambiental. Posteriormente, se aborda el planteamiento teórico, proporcionando un sólido marco conceptual que sustenta la investigación. Seguidamente, se explora el planteamiento metodológico, donde se describen las técnicas y enfoques más idóneos para ejecutar un estudio meticuloso.