The rapid advancement of technical advancements has resulted in the generation of substantial amount of electronic trash (e-waste). The volume of e-waste created, as well as the presence of both dangerous and beneficial elements, enhances the business potential of recovery and recycling significantly. Waste printed circuit boards (PCBs) include a number of hazardous heavy metals, including copper (Cu), tin (Sn), lead (Pb), and others (Zn, Ni, Fe, Br, Mn, Mg etc.). These discarded metals without treatment threaten the economy, the environment, and human health. Heavy metal recovery from PCBs is a big difficulty for researchers. The present review focuses on technological advances in the recovery of toxic, precious metals from PCBs.
1 February 2020 in Journal of Ceramic Processing Research
To mitigate the negative effects of pollution produced by the growing levels of pollutants in the environment, research and development of novel and more effective materials for the treatment of pollutants originating from a variety of industrial sources should be prioritized. In this research, a UV‐irradiated nano‐graphene oxide (UV/n‐GO) was developed and studied for methylene blue (MB) adsorption. Furthermore, the batch adsorption studies were modelled using response surface modelling (RSM) and artificial neural networks (ANNs). Investigations employing FTIR, XRD, and SEM were carried out to characterize the adsorbent. The best MB removal of 95.81% was obtained at a pH of 6, a dose of 0.4 g/L, an MB concentration of 25 mg/L, and a period of 40 min. This was accomplished with a desirability score of 0.853. A three‐layer backpropagation network with an ideal structure of 4‐4‐1 was used to create an ANN model. The R2 and MSE values determined by comparing the modelled data with the experimental data were 0.9572 and 0.00012, respectively. The % MB removal predicted by ANN was 94.76%. The kinetics of adsorption corresponded well with the pseudo‐second‐order model ( R2 > 0.97). According to correlation coefficients, the order of adsorption isotherm models is Redlich–Peterson > Temkin > Langmuir > Freundlich. Thermodynamic investigations show that MB adsorption was both spontaneous and endothermic.
Electronic garbage is one of the fastest-growing waste streams. Its disposal and appropriate management are a worldwide concern. Printed circuit boards (PCBs) are critical components in contemporary electronic gadgets that contain toxic elements. Bioprocessing of PCBs for metal recovery employing microbial methods has evolved as a green solution in metallurgical operations. Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans were used in this study to leach metals from powdered waste PCBs. The RSM is used for optimizing the leaching conditions. The optimal conditions obtained were a bacterial activation period of 28days, a pulp density of 23g/L, and a temperature of 31°C. A confirmatory experiment under these optimal circumstances yielded recovery rates of Cu2+, Sn2+, Pb2+, and Zn2+ of 95.62, 96.27, 95.6, and 98.25, respectively.
1 January 2022 in Chemical Industry and Chemical Engineering Quarterly
The rapid growth of technology is inevitable in humankind?s life and has a significant stint in electronic waste (e-waste) generation. Electronic waste possesses tremendous environmental and health effects, and one such major contributor to it is printed circuit boards (PCBs). The present work deals with the recovery of heavy metals from PCBs by using aqua regia as a leaching reagent in two stages (first stage HCl and HNO3 and second stage HCl and H2SO4). The response surface methodology was used to determine the optimal recovery conditions for the heavy metal ions: the recovery time of 5 h, the pulp density of 25 g/L, and the temperature of 90.1 ?C with desirability 0.761. These optimized values provide a maximum recovery rate of Cu (97.06%), Sn (94.66%), Zn (96.64%), and Pb (96.89%), respectively. EDXs are used to analyze the metal concentrations of the sample before and after treatment.
19 July 2022 in International Journal of Biomaterials
The municipal wastewater may be treated using a number of different types of fixed beds that have a larger surface area. Since the fibrous materials have such a large specific surface area, they are frequently considered to be the best option for greater microbiological support and treatment efficacy. In this research, natural fibre materials such as coir fibre and areca husk were investigated for their potential to function as fixed aerated beds for the treatment of municipal wastewater. During the experiment, variations in the chemical oxygen demand (COD), biological oxygen demand (BOD), total dissolved solids (TDS), and total suspended solids (TSS) of the effluent were used to determine how well the aerated fixed bed work in treating the wastewater. The most efficient operating parameters for the successful treatment of wastewater were determined to be a contact period of 72hrs, a filter medium depth of 5cm, and a packing density of 10kg/m3. The reductions in BOD, COD, TDS, and TSS for coir fibre are 55, 58.8, 57.8, and 51.89, respectively, whereas the reductions for areca husk are 38.3, 37.78, 31.76, and 30.56, respectively. In the course of this experiment, the coir fibre was discovered to be marginally more effective in comparison to the areca husk.