Abiodun Joseph Kilani

Mr. Abiodun Joseph Kilani


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022 in Research on Engineering Structures and Materials
Verified
Journal Article
Closed access
PDF file
FEFederal University Oye - Ekiti
Federal University Oye - Ekiti
AKAbiodun Joseph Kilani
Abiodun Joseph Kilani
CFChristopher Fapohunda
Christopher Fapohunda
UJUniversity of Johannesburg
University of Johannesburg
OAOluwatobi Adesanya Adeleke
Oluwatobi Adesanya Adeleke
CMCharity Metiboba
Charity Metiboba
Wastes generation and emission of greenhouse gases are the major concerns of the contemporary world. Concrete’s cements companies in the globe are producing up to 2.8 billion tons of cements annually. This contributed to the emission of anthropogenic substances into the atmosphere which destroys the ozone layers. The incessant disposal of these agricultural wastes has detrimental effect on the environmental and human health. Thus, utilizing these wastes as secondary resources in concrete is a reasonable consideration in sustainable waste management in the circular economy. The use of agricultural wastes in concrete production has been gaining attraction in recent years, however, their effectiveness and performance in concrete need evaluation. This study presents an overview of the effects of some agricultural wastes: Bagasse, Coconut shell, Cotton, Oil palm and Hemp fibers on concrete and composite’s mechanical properties. As reviewed, Sugar-Cane Bagasse Ash (SCBA) and Coconut Shell Ash (CSA) are rich in cementitious (pozzolanic) properties (SiO2, Fe2O3 and Al2O3) for cement production up to 70%. Sugar-cane bagasse and oil palm-fiber ashes improved concrete workability. SCBA and CSA highly increased the concrete compressive strengths. The concrete tensile strengths were increased up to 97% with the inclusion of cotton and bagasse ashes. The SCBA, hemp-fiber and treated oil palm - fiber ash increased the concrete and composite’s flexural strengths up to 11.3%, 26.2% and 50.7% respectively. In conclusion, the output of this review will supply full data of the research gaps yet to cover on the use of agro-wastes in concrete for future investigations

9 February 2022 in Asian Journal of Civil Engineering
Verified
Journal Article
Closed access
PDF file
AKAbiodun Joseph Kilani
Abiodun Joseph Kilani
OAOluwatobi Adesanya Adeleke
Oluwatobi Adesanya Adeleke
CFChristopher A. Fapohunda
Christopher A. Fapohunda

17 October 2024 in Iranian Journal of Science and Technology, Transactions of Civil Engineering
Verified
Journal Article
Open access
PDF file
AKAbiodun Joseph Kilani
Abiodun Joseph Kilani
Bolanle D. IkotunBolanle D. Ikotun
Bolanle D. Ikotun
RARasheed Deborah Abdulwahab
Rasheed Deborah Abdulwahab
Crumb rubber (CR) is a construction material obtained from slicing of scrap tyres. As reviewed, the inclusion of CR in concrete showed the reductions in concrete’s fresh and hardened properties even on its durability. This paper reports that CR-concrete is poor in workability, more porous, poor in resisting chlorine ion, inconsistency in strength and normally takes long time to set. Also, the review of previous results on CR-concrete proved that, CR-concrete’s ductile strength increased by 86.2% while its compressive, tensile and flexural strengths, and modulus of elasticity reduced by 50.3%, 24.51%, 31.94% and 23.51% respectively. The reduction in strength was tagged to the application of high percentages of CR in concrete (0–40%) and the use of high water–cement ratio (w/c) for the concrete production (≥ 4.0). Likewise, the microstructural results also support the strengths reduction trend. As reviewed, the inclusion of treated crumb rubbers in concrete improved its microstructural properties. Therefore, it is advisable to make use of the treated CR, 0–5% of CR and 0.4 water–cement ratio for the production of CR-concrete and mortar for better results. This data is available for future researchers to make further investigations on improving the weak reinforcing properties of Crumb Rubber in structural concrete and mortar.

10 March 2025 in Iranian Journal of Science and Technology, Transactions of Civil Engineering
Verified
Journal Article
Open access
PDF file
AKAbiodun Joseph Kilani
Abiodun Joseph Kilani
Bolanle D. IkotunBolanle D. Ikotun
Bolanle D. Ikotun
RARasheed Deborah Abdulwahab
Rasheed Deborah Abdulwahab
Mortar is one of the essential construction materials required for the construction of infrastructures, most importantly, as connectors in walling units. The incorporation of Rubber Crumbs (RCs) into mortar is one of the best methods of controlling environmental pollution and improving the quality of construction material. This study evaluates the performance of sodium hydroxide (NaOH) treated Rubber Crumb (RC) on mortar’s structural properties. In the experiment, the physical and chemical characterizations of the materials such as sand, RCs and cement were determined in accordance with SANS 3001-AG1 and SANS 3001-AG20 respectively. The consistency and setting times of mortar were determined according to SANS 50196 – 3: 2006 and EN 196 – 3: 2005. Also, the densities, water absorption, modulus of elasticity, and flexural and compressive strengths of mortar were evaluated according to SANS 50196-1, ASTM C 1437 and SANS 50196-3 standard using 40 × 40 × 160 mm mortar prisms. The morphological natures of the RC were evaluated through SEM and EDS techniques. The experimental results showed that 1.5% RC increased mortar’s compressive and flexural strengths by 9.13% and 5.89%, respectively. The density, modulus of elasticity, variation in modulus of elasticity, and water absorption of mortar reduced by 3.8, 10, 0.2 and 0.27% at the application of 1.5, 1.5, 1.5, and 3.5% of RC respectively. This reduction indicated good properties of RC- mortar for construction purposes. The SEM and EDS micrographs of RC treated with NaOH developed less dense pores leading to the production of better strength mortar. In conclusion, mortar with 1.5% NaOH treated RC is good for construction purposes, most importantly, in building blocks interface and rendering of walls.

24 June 2024 in Journal of Sustainable Construction Materials and Technologies
Verified
Journal Article
Open access
AKAbiodun Joseph Kilani
Abiodun Joseph Kilani
AAAkinniyi Akinjide Adelani
Akinniyi Akinjide Adelani
OOOladipupo Seun Oladejo
Oladipupo Seun Oladejo
Bolanle D. IkotunBolanle D. Ikotun
Bolanle D. Ikotun
AOAdemilade Olubambi
Ademilade Olubambi
Poor road design is the bedrock for strength deformation and formation of potholes in road pavement systems. The best choice of aggregates for asphalt concrete production contributes significantly to road pavement stability, sustainability, and durability at its serviceability life- style. The use of critical design and analysis techniques for the production of asphalt concrete is one of the standard means of eradicating the defect of roads’ pavement deformation in the global construction industries. This study reveals the hidden knowledge about the standard formulation and mix design required for producing durable asphaltic concrete pavements. In the experiment, three different mix designs were used to make quality asphalt concrete for the road’s binder pavement construction. This was done to ascertain the best quality ag- gregates required to produce durable asphalt concrete to construct binder road’s pavement. Also, the aggregates used for the production of quality asphalt concrete for the construction of road’s wearing course pavements were formulated using two mix designs. The results of the experiments proved that the asphalt concrete made with the aggregate formulated for the binder course from the first mix design yielded the best outcome, which is suggested for the global production of quality and standard asphalt concrete for road’ binder pavements’ con- struction. Although the formulated aggregates for the wearing course’s asphalt production were made from the two mix designs, however, the obtained results from the first mix design were satisfactory fell within the specified limits. This made it the best mix design for indus- trial practice. In addition, the accuracy and efficiency of the results obtained relied so much on the standard of estimation made to produce quality asphalt concrete, which cost up to $270,830.00 at Chainages 26 + 700 to 26 + 925. All the experimental results proved that ap- plication of standard aggregates’ mix design in road pavement construction helps in prevent- ing the problems of deformation, cracks, and other defects on the roads’ pavement system. Also, applying the first formulated mix design used in this study will help in maintaining the sustainable, durable, stable, and flexible road pavement in the global communities. Likewise, the government's constant expenditure on road pavement maintenance will be reduced.

13 February 2026 in Discover Materials
Verified
Journal Article
Open access
PDF file
AKAbiodun Joseph Kilani
Abiodun Joseph Kilani
Bolanle D. IkotunBolanle D. Ikotun
Bolanle D. Ikotun
RARasheed Deborah Abdulwahab
Rasheed Deborah Abdulwahab
In most recent times, the indiscriminate disposal of scrap tyres is highly contributing to the reduction in environmental sanitation of many global communities. One of the ways in managing this problem is via incorporating into cement composites as an ingredient. Despite the applications of rubber crumb (RC) in concrete, the combined effects of treated RC and steel wire is yet to be explored. This research works on mitigating the problem of RC-concrete’s strength reduction by jointing applications of sodium hydroxide (NaOH) treated RC and scrapped tyres steel wire (SW). The aim of the study is to produce RC-concrete with enhanced mechanical properties such as compressive and tensile strengths; model and optimize the outcomes using regression analysis (RA) and 3D graphing calculator (3DGC). In the process, the RC-SW-concretes were produced using a mix ratio of 1:2:3, 0.43 water–cement ratio. Addition of 3% SW being kept constant was jointly used with RC at varying levels of 1.5, 2.5, 3.5, and 5.0%, respectively. The RC-SW-concrete’s workability, consistency, setting times, compressive and tensile strengths were determined accordingly. The experimental results show that, RC-SW-concrete has good workability with slump values of 80–100 mm and setting times of 88–181.02 min. Also, it was observed that incorporation of RC and SW in concrete increased the concrete’s compressive strength by 1.03 and 5.86% at 1.5% of RC and a constant 3.0% of SW at 7 and 28 days; and tensile strength by 7.60, 6.11 and 3.55% at 1.5, 2.5, 3.5% of RC and a constant 3.0% of SW at 28 days of curing than that of control respectively. The RA model predicted results validate the experimental outputs with the predicted optimum compressive and tensile strength (CS and TS) values of 81.34 and 9.37 MPa at 1.5% of RC and 3.0% of SW which are closer to those of experimental values, 84.87 and 9.73 MPa respectively. Also, 3DGC model optimized the best CS and TS as 84.9 and 9.73 MPa at 5.0% of RC and a constant 3.0%SW at 28 days of curing respectively. In conclusion, 1.5–3.5% of RC and 3.0% SW have great potential benefits for the production of good strength concrete for construction practice.