Rasheed Deborah Abdulwahab

Dr. Rasheed Deborah Abdulwahab


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 October 2024 in Iranian Journal of Science and Technology, Transactions of Civil Engineering
Verified
Journal Article
Open access
PDF file
AKAbiodun Joseph Kilani
Abiodun Joseph Kilani
Bolanle D. IkotunBolanle D. Ikotun
Bolanle D. Ikotun
RARasheed Deborah Abdulwahab
Rasheed Deborah Abdulwahab
Crumb rubber (CR) is a construction material obtained from slicing of scrap tyres. As reviewed, the inclusion of CR in concrete showed the reductions in concrete’s fresh and hardened properties even on its durability. This paper reports that CR-concrete is poor in workability, more porous, poor in resisting chlorine ion, inconsistency in strength and normally takes long time to set. Also, the review of previous results on CR-concrete proved that, CR-concrete’s ductile strength increased by 86.2% while its compressive, tensile and flexural strengths, and modulus of elasticity reduced by 50.3%, 24.51%, 31.94% and 23.51% respectively. The reduction in strength was tagged to the application of high percentages of CR in concrete (0–40%) and the use of high water–cement ratio (w/c) for the concrete production (≥ 4.0). Likewise, the microstructural results also support the strengths reduction trend. As reviewed, the inclusion of treated crumb rubbers in concrete improved its microstructural properties. Therefore, it is advisable to make use of the treated CR, 0–5% of CR and 0.4 water–cement ratio for the production of CR-concrete and mortar for better results. This data is available for future researchers to make further investigations on improving the weak reinforcing properties of Crumb Rubber in structural concrete and mortar.

1 January 2021 in Research on Engineering Structures and Materials
Verified
Journal Article
Closed access
PDF file
RARasheed Deborah Abdulwahab
Rasheed Deborah Abdulwahab
SOSamson Olalekan Odeyemi
Samson Olalekan Odeyemi
HAHabeeb Temitope Alao
Habeeb Temitope Alao
TSToyyib Adeyinka Salaudeen
Toyyib Adeyinka Salaudeen
Effects of metakaolin and treated rice husk ash on the compressive strength of concrete

30 April 2025 in Journal of Building Pathology and Rehabilitation
Verified
Journal Article
Open access
PDF file
RARasheed Deborah Abdulwahab
Rasheed Deborah Abdulwahab
BIBolanle Deborah Ikotun
Bolanle Deborah Ikotun
ARAkeem Ayinde Raheem
Akeem Ayinde Raheem
EAEzekiel Adeyemi Adetoro
Ezekiel Adeyemi Adetoro
RSRamat Salihu
Ramat Salihu
OOOluwatosin Ann Oribamise
Oluwatosin Ann Oribamise
The demand for cement in the production of concrete is on the increase and its production is accompanied with the emission greenhouse gases resulting into global warming. Cow bones are being dumped into landfills thereby causing environmental pollution. This study aimed at investigating the use of cow bone ash (CBA) as a partial replacement of cement in concrete. The bones were propely cleaned of dirt and calcinated in a furnace at a temperature of 900℃. The ash was characterized to determine its elemental oxide compositions, and used to replace cement in 0, 5, 10, and 20%, respectively. Concrete proportioning of 1:2:4 and water-binder ratio of 0.5 were adopted. The workability of the concrete was investigated and thereafter, cast in moulds of 100 mm cubes and cured in water for 7, 14, 28, and 56 days, respectively. A total of 48 cubes were cast and the compressive strength was evaluated at corresponding curing ages. The results of characterization revealed that the CBA exhibited more of calcereous compounds and Hydroxyapatite with supplementary cementitious property owing to the presence of silica, ferric and alumina. The slump decreased with increasing content of CBA. In addition, the compressive strength was observed to reduce with increasing CBA. However, at later age of curing, the compressive strength of concrete with 5% CBA surpassed all levels of replacement. This is an evidence of pozzolanic potential being exhibited by the CBA. Futhermore, the least water absorption was observed with 5% CBA. In conclusion, the incoporation of 5% CBA enhanced the compressive strength of the concrete and could be recommended for structural works.

10 March 2025 in Iranian Journal of Science and Technology, Transactions of Civil Engineering
Verified
Journal Article
Open access
PDF file
AKAbiodun Joseph Kilani
Abiodun Joseph Kilani
Bolanle D. IkotunBolanle D. Ikotun
Bolanle D. Ikotun
RARasheed Deborah Abdulwahab
Rasheed Deborah Abdulwahab
Mortar is one of the essential construction materials required for the construction of infrastructures, most importantly, as connectors in walling units. The incorporation of Rubber Crumbs (RCs) into mortar is one of the best methods of controlling environmental pollution and improving the quality of construction material. This study evaluates the performance of sodium hydroxide (NaOH) treated Rubber Crumb (RC) on mortar’s structural properties. In the experiment, the physical and chemical characterizations of the materials such as sand, RCs and cement were determined in accordance with SANS 3001-AG1 and SANS 3001-AG20 respectively. The consistency and setting times of mortar were determined according to SANS 50196 – 3: 2006 and EN 196 – 3: 2005. Also, the densities, water absorption, modulus of elasticity, and flexural and compressive strengths of mortar were evaluated according to SANS 50196-1, ASTM C 1437 and SANS 50196-3 standard using 40 × 40 × 160 mm mortar prisms. The morphological natures of the RC were evaluated through SEM and EDS techniques. The experimental results showed that 1.5% RC increased mortar’s compressive and flexural strengths by 9.13% and 5.89%, respectively. The density, modulus of elasticity, variation in modulus of elasticity, and water absorption of mortar reduced by 3.8, 10, 0.2 and 0.27% at the application of 1.5, 1.5, 1.5, and 3.5% of RC respectively. This reduction indicated good properties of RC- mortar for construction purposes. The SEM and EDS micrographs of RC treated with NaOH developed less dense pores leading to the production of better strength mortar. In conclusion, mortar with 1.5% NaOH treated RC is good for construction purposes, most importantly, in building blocks interface and rendering of walls.

6 May 2025 in Journal of Building Pathology and Rehabilitation
Verified
Journal Article
Open access
PDF file
RARasheed Deborah Abdulwahab
Rasheed Deborah Abdulwahab
BIBolanle Deborah Ikotun
Bolanle Deborah Ikotun
ARAkeem Ayinde Raheem
Akeem Ayinde Raheem
EAEzekiel Adeyemi Adetoro
Ezekiel Adeyemi Adetoro
OOOluwatimilehin Kehinde Oriti
Oluwatimilehin Kehinde Oriti
Cement industries emit greenhouse gases into ecosystem, thus depleting the ozone layer. This calls for the applications of supplementary cementitious materials (SCMs) as alternative to cements. However, the choice of material is dependent on achieving global sustainable development with no or minimal environmental impacts. This research investigated the ash of cashew leaf as partial replacement of cement in mortar. The ash was added in 0, 10, 20, 30, and 40%, respectively. Mix ratio 1:3 and 0.6 water/binder were adopted. Setting times and consistency of the mortar were evaluated. Forty-eight (48) samples each were cast for 50 mm cubes and 100 × 100 × 400 mm for strengths in compression and bending, respectively. Thereafter, cured in water for 7, 28, 56, and 90 days, respectively. The compressive and flexural strengths were determined accordingly. The consistency and setting times of mortar increased with increasing CLA. 10% CLA enhanced compressive strength of the mortar at 90 days of curing as compared to the control and other replacements. Following the same trend, 10% CLA enhanced the flexural strength at both 56 and 90, days, respectively. The study concluded that 10% CLA enhanced both flexural and compressive strengths of mortar.

12 February 2020 in Malaysian Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
SOSamson Olalekan Odeyemi
Samson Olalekan Odeyemi
RARasheed Deborah Abdulwahab
Rasheed Deborah Abdulwahab
SBSefiu Adekunle Bello
Sefiu Adekunle Bello
AOAhmed Olatunbosun Omoniyi
Ahmed Olatunbosun Omoniyi
AAAdewale George Adeniyi
Adewale George Adeniyi
In recent years, repair and retrofit of existing structures such as buildings and bridges have been among the most important challenges in Civil Engineering. Strengthening reinforced concrete (RC) members with steel plates is a conventional method that has been adopted for decades. The corrosive nature of steel plates, its weight and the need for many anchor bolts for attachment makes it inefficient for retrofitting damaged structures. Thus, there is a need to source for an alternative material which does not corrode and still be used in the strengthening of reinforced concrete. Bamboo Reinforced Epoxy Composite (BREC) was used to repair five (5) damaged reinforced concrete beams in this research. Two of the beams were preloaded to 40 % and 60 % of the ultimate load before strengthening with BREC and all the beams were loaded to failure. The RC beams implanted with BREC rods experienced a rise in their load carrying capacity when tested. Beams preloaded up to 40 % and 60 % had an increase in flexural strength of 33.7 % and 39.3 % respectively when compared with beams reinforced with steel reinforcements. BREC rods in concrete is an effective method in increasing the flexural strength of RC beams.