The realization of stable inorganic perovskites is crucial to enable low-cost solution-processed photovoltaics. However, the main candidate material, CsPbI3, suffers from a spontaneous phase transition at room temperature towards a photo-inactive orthorhombic δ-phase (yellow phase). Here we used theoretical and experimental methods to study the structural and electronic features that determine the stability of the CsPbI3 perovskite. We argued that the two physical characteristics that favor the black perovskite phase at low temperatures are the strong spatial confinement in nanocrystalline structures and the level of electron doping in the material. Within this context, we discussed practical procedures for the realization of long-lasting inorganic lead halide perovskites.
The black γ‐phase of CsPbI3 with its bandgap at ≈1.75 eV can enable the take‐off of tandem solar cells as soon as intrinsic instability to the yellow δ‐phase is solved. Here, a black γ‐phase is formed at low temperature (80–90 °C) by incorporating Eu through EuCl3 or EuI2. It is forced to become yellow by thermal heating under nitrogen. It is demonstrated how spectroscopic ellipsometry and the related critical points analysis provide a new diagnostic tool to monitor the transformation through the bandgap footprint. As two sides of the same coin, the consumption of the black γ‐phase and the growth of the yellow δ‐phase are addressed and modeled in the range of 60–100 °C using the Avrami's theory. This approach allows extracting the activation energies of the phase transformation that are 0.95 eV versus 1.15 eV using EuI2 and EuCl3, respectively. In situ transmission electron microscopy analyses combined with fast marching simulations highlight that the phase transformation occurs through constant nucleation and growth. Europium has indeed the capability to tackle those processes and to extend the durability of the black γ‐phase at 30 °C in N2 to ≈250 days, hugely above the one observed without Eu (≈hours).
Device engineering with proper material integration into perovskite solar cells (PSCs) would extend their durability provided a special care is spent to retain interface integrity during use. In this paper, we propose a method to preserve the perovskite (PSK) surface from solvent-mediated modification and damage that can occur during the deposition of a top contact and furtherly during operation. Our scheme used a hole transporting layer-free top-contact made of Carbon (mostly graphite) to the side of hole extraction. We demonstrated that the PSK/graphite interface benefits from applying a vacuum-curing step after contact deposition that allowed mitigating the loss in efficiency of the solar devices, as well as a full recovery of the electrical performances after device storage in dry nitrogen and dark conditions. The device durability compared to reference devices was tested over 90 days. Conductive atomic force microscopy (CAFM) disclosed an improved surface capability to hole exchange under the graphite contact after vacuum curing treatment.
We present a method for the simulation of the kinetic evolution in the sub µs timescale for composite materials containing regions occupied by alloys, compounds, and mixtures belonging to the Ni-Si-C ternary system. Pulsed laser irradiation (pulses of the order of 100 ns) promotes this evolution. The simulation approach is formulated in the framework of the phase-field theory and it consists of a system of coupled non-linear partial differential equations (PDEs), which considers as variables the following fields: the laser electro-magnetic field, the temperature, the phase-field and the material (Ni, Si, C, C clusters and Ni-silicides) densities. The model integrates a large set of materials and reaction parameters which could also self-consistently depend on the model variables. A parameter calibration is also proposed, specifically suited for the wavelength of a widely used class of excimer lasers (λ = 308 nm). The model is implemented on a proprietary laser annealing technology computer-aided design (TCAD) tool based on the finite element method (FEM). This integration allows, in principle, numerical solutions in systems of any dimension. Here we discuss the complex simulation trend in the one-dimensional case, considering as a starting state, thin films on 4H-SiC substrates, i.e., a configuration reproducing a technologically relevant case study. Simulations as a function of the laser energy density show an articulated scenario, also induced by the variables’ dependency of the materials’ parameters, for the non-melting, partial-melting and full-melting process conditions. The simulation results are validated by post-process experimental analyses of the microstructure and composition of the irradiated samples.
Transparent conductive oxide (TCO) layers, to be implemented in photo-anodes for dye-sensitized solar cells (DSCs), were prepared by co-deposition of ZnO and Al using pulsed-direct current (DC)-magnetron reactive sputtering processes. The films were deposited at low deposition temperatures (RT-188 °C) and at fixed working pressure (1.4 Pa) using soft power loading conditions to avoid intrinsic extra-heating. To compensate the layer stoichiometry, O2 was selectively injected close to the sample in a small percentage (Ar:O2 = 69 sccm:2 sccm). We expressly applied the deposition temperature as a controlling parameter to tune the incorporation of the Al3+ species in the targeted position inside the ZnO lattice. With this method, Aluminum-doped Zinc Oxide films (ZnO:Al) were grown following the typical wurtzite structure, as demonstrated by X-ray Diffraction analyses. A combination of micro-Raman, X-ray photoelectron spectroscopy (XPS) and spectroscopic ellipsometry (SE) analyses has shown that the incorporated host-atoms are Al3+ species in Zn2+ substitutional position; their amount increases following a direct monotonic trend with the deposition temperature. Correspondently, the c-axis strain into the layer decreases due to the progressive ordering of the lattice structure and reducing clustering phenomena. The maximum average Al content inside the film was ~2%, as measured by energy dispersive X-ray (EDX) spectroscopy, with a uniform distribution of the dopant species along the layer thickness traced by depth-profile XPS analyses. The optimised ZnO:Al layer, deposited at a rate of ~7 nm/min, exhibits high transmittance in the visible range (~85%) and low resistivity values (~13 mΩ × cm). The material therefore fulfils all the requirements to be candidate as TCO for low-cost DSCs on flexible substrates for large area technologies.
24 July 2021 in European Journal of Inorganic Chemistry
Potassium complexes are starting to gather more and more interest from academia and industry because of their intriguing application possibilities. Novel adducts of potassium hexafluoroacetylacetonato [K(hfa)] with polyethers (monoglyme, diglyme, triglyme, and tetraglyme) were synthesized through a single step reaction and characterized through FT‐IR spectroscopy as well as 1H and 13C NMR spectroscopy. Single crystal X‐ray diffraction studies enabled the identification of fascinating K coordination polymeric networks.