Daniela Lucia Vega Araujo

Mrs. Daniela Lucia Vega Araujo

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 July 2023 in Arabian Journal for Science and Engineering
Verified
Journal Article
Open access
PDF file
JFJosé Eduardo Salcedo Fontalvo
José Eduardo Salcedo Fontalvo
DADaniela Lucia Vega Araujo
Daniela Lucia Vega Araujo
LPLucia Ariza Polo
Lucia Ariza Polo
JQJustin Padilla Quiroz
Justin Padilla Quiroz
ACAndrea Castro Cabeza
Andrea Castro Cabeza
Recycled concrete aggregates (RCAs) have a high potential to be used as replacements for natural aggregates in the construction of pavements with similar or even better characteristics. This paper evaluates the influence of RCA as a partial replacement in a granular sub-base of 37.5 mm nominal maximum size (GSB38). Specifically, two replacement percentages of RCA by weight of the coarse aggregate of the GSB38 were evaluated: 10 and 15. To estimate the influence on the mechanical behavior, abrasion tests were carried out in the Los Angeles (LA) abrasion and California bearing ratio (CBR) methods. For GSB38, the average abrasion results were 30.54%. The CBR for the same material at a penetration of 0.254 cm was 26.90, 61.00 and 76.20% and at a penetration of 0.508 cm was 33.00, 65.70 and 82.00% for 10, 25 and 56 blows per layer, respectively. For GSB38 with 10% RCA, similar and even better behavior than natural GSB38 was found in terms of LA abrasion, with an average result of 38.68%. The CBR for the same alternative at a penetration of 0.254 cm was 13.20, 52.80 and 57.70% and at a penetration of 0.508 cm was 18.00, 61.30 and 68.90% for 10, 25 and 56 blows per layer, respectively. But GSB38 with 15% RCA showed an average abrasion of 45.51%, indicating a decrease compared with natural GSB38 and GSB38 with 10% RCA. The CBR for the same alternative also shows a decreasing trend.

4 July 2022 in IIUM Engineering Journal
Verified
Journal Article
Open access
PDF file
DADaniela Lucia Vega Araujo
Daniela Lucia Vega Araujo
JFJose Eduardo Salcedo Fontalvo
Jose Eduardo Salcedo Fontalvo
RTRichard Jimenez Triana
Richard Jimenez Triana
DBDulce Maria Palacios del Barre
Dulce Maria Palacios del Barre
CSCesar Fresneda Saldarriaga
Cesar Fresneda Saldarriaga
Use of Recycled Concrete Aggregate (RCA) for Granular Subbase (GSB) in the tropical area is evaluated in this work. Among the materials widely studied as replacements in granular and surface layers is RCA. Its mechanical behavior in granular layers has mainly been evaluated with tests such as California Bearing Ratio (CBR). However, abrasion is also a determining property in the strength of these materials. In this study, the performance of Natural Aggregates (NA) with replacement of RCA was evaluated for use as GSB in a tropical area. Even though several laboratory tests were performed, the focus of the article lies on the performance in the Los Angeles (LA) abrasion test. Two replacement percentages of coarse RCA were considered: 10 and 15 % by weight of aggregates. The RCA and NA were characterized according to different laboratory tests: Granulometry, Absorption, Atterberg Limits test, Plasticity, Specific Gravity, and LA abrasion. In turn, all results were compared with Colombian specifications for a typical GSB in the area. In addition, a simple Life Cycle Assessment (LCA) was included to evaluate the environmental impacts of the base and alternative scenarios. The results show that GSB with 10% RCA present a higher abrasion resistance than the GSB with 15% RCA. Even better results are obtained with 10% RCA than with natural GSB. Specifically, average LA abrasion test losses of 30.86, 29.80 and 32.07% were obtained for NA, 10% RCA and 15% RCA, respectively. The LCA results show an increase of 50% and 75% in energy consumption by comparing the base scenario with 10 and 15% RCA replacement, respectively. This leads to an increase of 40 and 80% in carbon monoxide (CO) emissions for 10 and 15% RCA replacement respectively, and 100% in carbon dioxide (CO2) emissions for both alternative scenarios. ABSTRAK: Penggunaan Agregat Konkrit Kitar Semula (RCA) bagi Subtapak Butiran (GSB) bagi kawasan tropika telah dikaji dalam kajian ini. Antara bahan yang banyak dikaji sebagai bahan ganti dalam butiran dan lapisan permukaan adalah RCA. Ciri-ciri mekanikal dalam lapisan butiran telah diuji, terutamanya dengan ujian seperti Nisbah Bearing California (CBR). Walau bagaimanapun, pelelasan juga merupakan ciri penting dalam menentukan ketahanan material. Kajian ini merupakan prestasi Agregasi Semulajadi (NA) dengan ganti RCA yang diuji bagi penggunaan GSB di kawasan tropika. Walaupun pelbagai ujian makmal telah dijalankan, fokus artikel ini terletak pada prestasi ujian pelelasan Los Angeles (LA). Dua gantian bagi peratus RCA kasar telah diambil kira: iaitu pada agregat berat 10% dan 15%. Ciri-ciri RCA dan NA dikategori berdasarkan pelbagai ujian lab yang pelbagai: Granulometri, Penyerapan, ujian Had Atterberg, Keplastikan, Graviti Tertentu dan Pelelasan LA. Kemudian, kesemua dapatan kajian dibandingkan dengan ciri-ciri Kolombia bagi ciri tipikal GSB di kawasan itu. Tambahan, Pentaksiran Kitar Hidup (LCA) yang ringkas dimasukkan bagi menilai impak terhadap alam terhadap penggunaanya pada pangkal bijirin dan pada senario alternatif. Dapatan kajian menunjukkan GSB yang menggunakan RCA 10% mempunyai rintangan lelasan tertinggi berbanding GSB dengan RCA 15%. Tambahan, dapatan kajian yang lebih baik didapati daripada RCA 10% berbanding GSB semula jadi. Terutama pada purata ujian lelasan LA telah mengalami penyusutan sebanyak 30.86, 29.80 dan 32.07% bagi NA, RCA 10% dan RCA 15%, masing-masing. Dapatan LCA menunjukkan peningkatan sebanyak 50% dan 75% pada penggunaan tenaga dengan perbandingan senario Subtapak Butiran dengan gantian RCA 10% dan 15%, masing-masing. Ini membawa kepada peningkatan sebanyak 40% dan 80% emisi karbon monoksida (CO) bagi gantian RCA 10% dan 15% masing-masing, dan emisi karbon dioksida (CO2) 100% bagi kedua-dua senario alternatif.

13 May 2024 in Arabian Journal for Science and Engineering
Verified
Journal Article
Open access
PDF file
JFJosé Salcedo Fontalvo
José Salcedo Fontalvo
DADaniela Lucia Vega Araujo
Daniela Lucia Vega Araujo
ACAndrea Castro Cabeza
Andrea Castro Cabeza
CLCamilo Ramirez Lozano
Camilo Ramirez Lozano
SRSainner Lopez Rengifo
Sainner Lopez Rengifo
The increasing manufacturing of tires, driven by the automotive sector, has led to various sustainability and waste management issues. Consequently, it is necessary to explore alternatives for the reuse of these wastes. Rubber has demonstrated properties that could make it an attractive material for use as a granular aggregate. The aim of this study is to evaluate the influence of crumb rubber (CR) on the mechanical behavior of a granular subbase (GSB) by replacing fine CR at 10% and 15%. An environmental analysis of the proposal was conducted using the SimaPro tool, and a series of laboratory tests were performed to assess physical and mechanical characteristics. The strength results indicate a decreasing trend as the CR content in the GSB increases. Specifically, in abrasion tests, the natural material showed an average result of 30.86%, while the mixes with 10% and 15% CR exceeded the maximum limit (50%), achieving results of 59.24% and 53.98%, respectively. In terms of the California Bearing Ratio (CBR), only the natural samples compacted at maximum energy exceeded the minimum requirements for low and medium traffic levels (30%). The highest CBR value for samples containing CR was 5%, whereas the natural GSB reached a maximum CBR of 33%. A similar trend is observed in environmental outcomes, with increases of up to 17% in abiotic depletion for the sample with 15% CR. Overall, the environmental analysis suggests that incorporating CR into the GSB could lead to an increase in various environmental impacts.

18 October 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JFJosé Eduardo Salcedo Fontalvo
José Eduardo Salcedo Fontalvo
DADaniela Lucia Vega Araujo
Daniela Lucia Vega Araujo
Rodrigo Polo-MendozaRodrigo Polo-Mendoza
Rodrigo Polo-Mendoza
FHFelipe Ángeles Puc Hernandez
Felipe Ángeles Puc Hernandez
LOLuisa Navarro Ortiz
Luisa Navarro Ortiz
GVGrey Meneses Vides
Grey Meneses Vides
The valorization of by-products from construction waste offers significant potential for developing sustainable materials in road infrastructure. Accordingly, this study investigates the incorporation of Fine Recycled Concrete Aggregate (FRCA) as a partial replacement of virgin aggregates in Granular Subbases (GSB), considering both mechanical performance and environmental impacts. Replacement levels of 10% and 15% FRCA are examined and benchmarked against standard specifications for GSB within the Colombian context. The experimental campaign is composed of grain size distribution, Atterberg limits, Proctor compaction, Los Angeles abrasion, and California bearing ratio tests. Furthermore, a cradle-to-gate life-cycle assessment was conducted to evaluate the potential environmental benefits of diverting FRCA by-products from disposal and valorizing them as construction materials. Overall, the mechanical and environmental assessments reveal that if the Los Angeles abrasion criterion is set aside (because any FRCA content surpasses the allowable limits), the optimal mixture is the one formed by 85% GSB38 and 15% FRCA. This combination satisfies the standards for high-traffic roads while providing approximately 22.5–25% relative environmental savings.

10 September 2026 in Sci
Verified
Journal Article
Open access
PDF file
JFJosé Eduardo Salcedo Fontalvo
José Eduardo Salcedo Fontalvo
AGAngie Murillo Galindo
Angie Murillo Galindo
DADaniela Lucia Vega Araujo
Daniela Lucia Vega Araujo
Ibrahim Khalil Dawd BermejoIbrahim Khalil Dawd Bermejo
Ibrahim Khalil Dawd Bermejo
Rodrigo Polo-MendozaRodrigo Polo-Mendoza
Rodrigo Polo-Mendoza
ECElvis Covilla
Elvis Covilla
This study evaluates four granular sub-bases for pavement applications under Colombian conditions. A natural granular sub-base with a nominal maximum aggregate size of approximately 38 mm (i.e., GSB38) served as the control. Three modified mixtures comprised (i) 90% GSB38 with 5% Recycled Concrete Aggregate (RCA) and 5% Crumb Rubber (CR), (ii) 80% GSB38 with 10% RCA and 10% CR, and (iii) 70% GSB38 with 15% RCA and 15% CR. Thus, these formulations represented total recycled contents of 10%, 20%, and 30%, respectively, calculated on a dry-mass basis. Particle size distribution, standard Proctor compaction, Los Angeles abrasion, and four-day soaked California Bearing Ratio (CBR) tests were performed, and results were evaluated against Colombian specifications. An attributional cradle-to-gate Life-Cycle Assessment (LCA) with a one-tonne functional unit used SimaPro 9.4, Ecoinvent 3.9, and TRACI 2.1. All formulations complied with gradation, compaction, and abrasion requirements. As recycled content increased, optimum moisture content rose from 7.695% to 9.001%, maximum dry density fell from 2.388 to 2.072 g/cm3, and abrasion loss rose from 42.0% to 45.5%. Design CBR responded nonmonotonically, with design CBR values of 44.4%, 24.9%, 59.3%, and 90.1% for formulations with 0, 10, 20, and 30% total recycled material content, respectively. The 10% formulation failed the minimum CBR criterion, whereas the other mixtures met the high-traffic requirement. All recycled formulations reduced all considered environmental indicators; for example, the 30% recycled-content mixture decreased ozone depletion by 20.199% and global warming potential by 3.501%. Overall, the sub-base formulations with 20% and 30% of total recycled content showed strong technical and environmental potential, although replicated testing and field validation remain necessary.

12 May 2026 in International Journal of Pavement Research and Technology
Verified
Journal Article
Open access
JFJosé Eduardo Salcedo Fontalvo
José Eduardo Salcedo Fontalvo
DADaniela Lucia Vega Araujo
Daniela Lucia Vega Araujo
ACAndrea Castro Cabeza
Andrea Castro Cabeza
AHAngie Gutierrez Hernandez
Angie Gutierrez Hernandez
FHFelipe Ángeles Puc Hernández
Felipe Ángeles Puc Hernández
In the pursuit of sustainable solutions in construction, crumb rubber (CR) emerges as a viable alternative for enhancing road infrastructure projects. This study aims to assess the replacement of coarse crumb rubber (CCR) in a granular subbase with a maximum nominal size of 37.5 mm (known as GSB38), under Colombian conditions. The evaluated replacements of CCR were 10% and 15% by weight, and physical and mechanical tests were conducted to assess the impact of recycling on the behavior of GSB38. Additionally, to verify its sustainability as an alternative, a comparative environmental analysis was carried out between alternatives with CCR and 100% GSB38. The environmental analysis was modeled using the SimaPro tool, considering a cradle-to-gate approach. Furthermore, the assessment was conducted by applying CML-IA baseline V3.08 / EU25, which assesses 11 impacts. Savings of up to 9% were found in Acidification and Eutrophication impacts when using 10% CCR. Conversely, with 15% CCR, the maximum environmental savings observed were 5% in Eutrophication. Although the inclusion of CCR resulted in environmental improvements, it also led to a decline in mechanical performance, particularly in terms of CBR values. This reduction in strength renders the CCR alternatives unsuitable from a structural perspective. Nevertheless, from an environmental standpoint, the use of CCR represents a promising strategy for the management of rubber waste and contributes to the advancement of more sustainable construction practices, particularly in contexts where waste reuse policies are still under development.