The delay in the energy transition, focused in the replacement of fossil diesel with biodiesel, is mainly caused by the need of reducing the costs associated to the transesterification reaction of vegetable oils with methanol. This reaction, on an industrial scale, presents several problems associated with the glycerol generated during the process. The costs to eliminate this glycerol have to be added to the implicit cost of using seed oil as raw material. Recently, several alternative methods to convert vegetable oils into high quality diesel fuels, which avoid the glycerol generation, are being under development, such as Gliperol, DMC-Biod, or Ecodiesel. Besides, there are renewable diesel fuels known as “green diesel”, obtained by several catalytic processes (cracking or pyrolysis, hydrodeoxygenation and hydrotreating) of vegetable oils and which exhibit a lot of similarities with fossil fuels. Likewise, it has also been addressed as a novel strategy, the use of straight vegetable oils in blends with various plant-based sources such as alcohols, vegetable oils, and several organic compounds that are renewable and biodegradable. These plant-based sources are capable of achieving the effective reduction of the viscosity of the blends, allowing their use in combustion ignition engines. The aim of this review is to evaluate the real possibilities that conventional biodiesel has in order to success as the main biofuel for the energy transition, as well as the use of alternative biofuels that can take part in the energy transition in a successful way.

Considering the renewable electricity production using sustainable technologies, such as solar photovoltaics or wind turbines, it is essential to have systems that allow for storing the energy produced during the periods of lower consumption as well as the energy transportation through the distribution network. Despite hydrogen being considered a good candidate, it presents several problems related to its extremely low density, which requires the use of very high pressures to store it. In addition, its energy density in volumetric terms is still clearly lower than that of most liquid fuels. These facts have led to the consideration of ammonia as an alternative compound for energy storage or as a carrier. In this sense, this review deals with the evaluation of using green ammonia for different energetic purposes, such as an energy carrier vector, an electricity generator and E-fuel. In addition, this study has addressed the latest studies that propose the use of nitrogen-derived compounds, i.e., urea, hydrazine, ammonium nitrate, etc., as alternative fuels. In this study, the possibility of using other nitrogen-derived compounds, i.e., an update of the ecosystem surrounding green ammonia, has been assessed, from production to consumption, including storage, transportation, etc. Additionally, the future challenges in achieving a technical and economically viable energy transition have been determined.

In the last few years, researchers have focused their attention on the synthesis of new catalyst structures based on or inspired by nature. Biotemplating involves the transfer of biological structures to inorganic materials through artificial mineralization processes. This approach offers the main advantage of allowing morphological control of the product, as a template with the desired morphology can be pre-determined, as long as it is found in nature. This way, natural evolution through millions of years can provide us with new synthetic pathways to develop some novel functional materials with advantageous properties, such as sophistication, miniaturization, hybridization, hierarchical organization, resistance, and adaptability to the required need. The field of application of these materials is very wide, covering nanomedicine, energy capture and storage, sensors, biocompatible materials, adsorbents, and catalysis. In the latter case, bio-inspired materials can be applied as catalysts requiring different types of active sites (i.e., redox, acidic, basic sites, or a combination of them) to a wide range of processes, including conventional thermal catalysis, photocatalysis, or electrocatalysis, among others. This review aims to cover current experimental studies in the field of biotemplating materials synthesis and their characterization, focusing on their application in heterogeneous catalysis.

Many countries are immersed in several strategies to reduce the carbon dioxide (CO₂) emissions of internal combustion engines. One option is the substitution of these engines by electric and/or hydrogen engines. However, apart from the strategic and logistical difficulties associated with this change, the application of electric or hydrogen engines in heavy transport, e.g., trucks, shipping, and aircrafts, also presents technological difficulties in the short-medium term. In addition, the replacement of the current car fleet will take decades. This is why the use of biofuels is presented as the only viable alternative to diminishing CO₂ emissions in the very near future. Nowadays, it is assumed that vegetable oils will be the main raw material for replacing fossil fuels in diesel engines. In this context, it has also been assumed that the reduction in the viscosity of straight vegetable oils (SVO) must be performed through a transesterification reaction with methanol in order to obtain the mixture of fatty acid methyl esters (FAMEs) that constitute biodiesel. Nevertheless, the complexity in the industrial production of this biofuel, mainly due to the costs of eliminating the glycerol produced, has caused a significant delay in the energy transition. For this reason, several advanced biofuels that avoid the glycerol production and exhibit similar properties to fossil diesel have been developed. In this way, “green diesels” have emerged as products of different processes, such as the cracking or pyrolysis of vegetable oil, as well as catalytic (hydro)cracking. In addition, some biodiesel-like biofuels, such as Gliperol (DMC-Biod) or Ecodiesel, as well as straight vegetable oils, in blends with plant-based sources with low viscosity have been described as renewable biofuels capable of performing in combustion ignition engines. After evaluating the research carried out in the last decades, it can be concluded that green diesel and biodiesel-like biofuels could constitute the main alternative to addressing the energy transition, although green diesel will be the principal option in aviation fuel.

The aim of this work is to analyze the effect of using diethyl ether (DEE) as an oxygenated additive of straight vegetable oils (SVOs) in triple blends with fossil diesel, to be used in current compression ignition (C.I.) engines, in order to implement the current process of replacing fossil fuels with others of a renewable nature. The use of DEE is considered taking into account the favorable properties for blending with SVO and fossil diesel, such as its very low kinematic viscosity, high oxygen content, low autoignition temperature, broad flammability limits (it works as a cold start aid for engines), and very low values of cloud and pour point. Therefore, DEE can be used as a solvent of vegetable oils to reduce the viscosity of the blends and to improve cold flow properties. Besides, DEE is considered renewable, since it can be easily obtained from bioethanol, which is produced from biomass through a dehydration process. The vegetable oils evaluated in the mixtures with DEE were castor oil, which is inedible, and sunflower oil, used as a standard reference for waste cooking oil. In order to meet European petrodiesel standard EN 590, a study of the more relevant rheological properties of biofuels obtained from the DEE/vegetable oil double blends has been performed. The incorporation of fossil diesel to these double blends gives rise to diesel/DEE/vegetable oil triple blends, which exhibited suitable rheological properties to be able to operate in conventional diesel engines. These blends have been tested in a conventional diesel engine, operating as an electricity generator. The efficiency, consumption and smoke emissions in the engine have been measured. The results reveal that a substitution of fossil diesel up to 40% by volume can be achieved, independently of the SVO employed. Moreover, a significant reduction in the emission levels of pollutants and better cold flow properties has been also obtained with all blends tested.