Na0.67MnO2 (NMO) stands out among the layered cathode materials used for sodium batteries due to its high-capacity values, low cost, and environmental friendliness. Unfortunately, many drawbacks arise during cycling, but nanostructure tailoring and doping can help to mitigate them. Our aim was to synthesize undoped and Cu- or Fe-doped NMO samples via the sol-gel route, with a different cooling step to room temperature, i.e., in a natural way or via quenching. The formation of a mixture of polymorphs was observed, as well as differences in the external morphology of the powders’ grains. The use of spectroscopic techniques, Mössbauer spectroscopy for the Fe-doped samples and Electron paramagnetic resonance, allowed us to gain insights into the oxidation states of transition metals and to make suggestions about the magnetic ordering, as well as on the possible presence of magnetic impurities. Cyclic voltammetry and galvanostatic cycling results were interpreted on the basis of the spectroscopic data: the introduction of substituents, in general, worsens the capacity values, due to the decrease in the P2 amount and the introduction of structural distortions. The structural stability of the samples in air as a function of time was also analyzed via X-ray diffraction, demonstrating the positive effect of Cu presence.
Sodium-ion batteries are considered promising alternatives to lithium-ion technology; however, the diffusion on a commercial scale is hindered by the struggle to identify materials with high electrochemical performances. Studies available in the literature are mainly focused on electrochemical performance and neglect aspects related to the environmental sustainability. In fact, the current state-of-the-art (presented in this study) shows that life cycle assessment (LCA) studies related to the production processes of electrode materials for Na-ion batteries are still very limited. The LCA methodology applied during the development of a technology phase can constitute a valid support for an eco-oriented design and, therefore, to the choice of solutions characterized by a lower environmental impact with the same electrochemical performance. In this context, a life cycle-based environmental–economic assessment was performed to evaluate the environmental impacts of the production process of cathode and anode materials for sodium-ion batteries. The study is focused on the cathodic active material Na0.66MnO2, considering two synthesis paths, and the anodic material consisting of tin (Sn) and Sn-carbon nanofiber (Sn-Cn) active material, binder, and other additives. Results illustrate the environmental performance of the different materials and constitute a useful input for their selection within an eco-design view.
GeFe2O4 (GFO), with its intriguing intercalation mechanism based on alloying–conversion reactions, was recently proposed as an anode material for sodium ion batteries (SIBs). However, drawbacks related to excessive volume expansion during intercalation/deintercalation and poor electronic conductivity enormously hinder its practical application in batteries. In this regard, some experimental strategies such as cation substitutions and proper architectures/carbon coatings can be adopted. In this paper, pure and Mn-doped GFO samples were prepared by hydrothermal synthesis. The doped samples maintained the spinel cubic structure and the morphology of pure GFO. The electrochemical tests of the samples, performed after proper carbon coating, showed the expected redox processes involving both Ge and Fe ions. The Mn doping had a positive effect on the capacity values at a low current density (about 350 mAh/g at C/5 for the Mn 5% doping in comparison to 300 mAh/g for the pure sample). Concerning the cycling stability, the doped samples were able to provide 129 mAh/g (Mn 10%) and 150 mAh/g (Mn 5%) at C/10 after 60 cycles.
GeFe2O4 (GFO) is a germanium mineral whose spinel crystal structure determines its interesting functional properties. Recently, it was proposed for application as an anode for Sodium and Lithium-Ion Batteries (SIBs and LIBs) thanks to its combined conversion and alloying electrochemical mechanism. However, its entire potential is limited by the poor electronic conductivity and volumetric expansion during cycling. In the present paper, pure and Sn or Mg doped GFO samples obtained from mechano-chemical solid-state synthesis and properly carbon coated were structurally and electrochemically characterized and proposed, for the first time, as anodes for SIBs. The spinel cubic structure of pure GFO is maintained in doped samples. The expected redox processes, involving Fe and Ge ions, are evidenced in the electrochemical tests. The Sn doping demonstrated a beneficial effect on the long-term cycling (providing 150 mAh/g at 0.2 C after 120 cycles) and on the capacity values (346 mAh/g at 0.2 C with respect to 300 mAh/g of the pure one), while the Mg substitution was less effective.