Synopsis: A organic carbonate derived from glycerol, ethanol, and CO 2 demonstrates efficient plasticizing properties for PLA, offering a notable advantage in terms of morphological stability over the conventional plasticizer, acetyltributylcitrate.
The demand for poly(α-olefin)s (PAOs), which are high-performance group IV lubricant base oils, is increasingly high. PAOs are generally produced via the cationic oligomerization of 1-decene, wherein skeleton rearrangement inevitably occurs in the products. Hence, a transition-metal-based catalytic process that avoids rearrangement would be a valuable alternative for cationic oligomerization. In particular, transition-metal-catalyzed selective trimerization of α-olefins has the potential for success. In this study, (N,N′,N″-tridodecyltriazacyclohexane)CrCl3 complex was reacted with MAO-silica (MAO, methylaluminoxane) for the preparation of a supported catalyst, which exhibited superior performance in selective α-olefin trimerization compared to that of the corresponding homogeneous catalyst, enabling the preparation of α-olefin trimers at ~200 g scale. Following hydrogenation, the prepared 1-decene trimer (C30H62) exhibited better lubricant properties than those of commercial-grade PAO-4 (kinematic viscosity at 40 °C, 15.1 vs. 17.4 cSt; kinematic viscosity at 100 °C, 3.9 vs. 3.9 cSt; viscosity index, 161 vs. 123). Moreover, it was shown that 1-octene/1-dodecene mixed co-trimers (i.e., a mixture of C24H50, C28H58, C32H66, and C36H74), generated by the selective supported Cr catalyst, exhibited outstanding lubricant properties analogous to those observed for the 1-decene trimer (C30H62).
8 August 2022 in Journal of the American Chemical Society
CrCl3(thf)3 is a common starting material in the synthesis of organometallic and coordination compounds of Cr. Deposited as an irregular solid with no possibility of recrystallization, it is not a purity guaranteed chemical, causing problems in some cases. In this work, we disclose a well-defined form of the THF adduct of CrCl3 ([CrCl2(μ-Cl)(thf)2]2), a crystalline solid, that enables structure determination by X-ray crystallography. The EA data and XRD pattern of the bulk agreed with the revealed structure. Moreover, its preparation procedure is facile: evacuation of CrCl3·6H2O at 100 °C, treatment with 6 equivalents of Me3SiCl in a minimal amount of THF, and crystallization from CH2Cl2. The ethylene tetramerization catalyst [iPrN{P(C6H4-p-Si(nBu)3)2}2CrCl2]+[B(C6F5)4]− prepared using well-defined [CrCl2(μ-Cl)(thf)2]2 as a starting material exhibited a reliably high activity (6600 kg/g-Cr/h; 1-octene selectivity at 40 °C, 75%), while that of the one prepared using the impure CrCl3(thf)3 was inconsistent and relatively low (~3000 kg/g-Cr/h). By using well-defined [CrCl2(μ-Cl)(thf)2]2 as a Cr source, single crystals of [(CH3CN)4CrCl2]+[B(C6F5)4]− and [{Et(Cl)Al(N(iPr)2)2}Cr(μ-Cl)]2 were obtained, allowing structure determination by X-ray crystallography, which had been unsuccessful when the previously known CrCl3(thf)3 was used as the Cr source.