The geometric distribution of seabed beacons significantly impacts the positioning accuracy of underwater acoustic navigation systems. To address this challenge, we propose a depth-constrained adaptive stochastic model optimization method based on singular value decomposition (SVD). The method quantifies the contribution weights of each beacon to the dominant navigation direction by performing SVD on the acoustic observation matrix. The acoustic ranging covariance matrix can be dynamically adjusted based on these weights to suppress error propagation. At the same time, the prior depth with centimeter-level accuracy provided by the pressure sensor is used to establish strong constraints in the vertical direction. The experimental results demonstrate that the depth-constrained adaptive stochastic model optimization method reduces three-dimensional RMS errors by 66.65% (300 m depth) and 77.25% (2000 m depth) compared to conventional equal-weight models. Notably, the depth constraint alone achieves 95% vertical error suppression, while combined SVD optimization further enhances horizontal accuracy by 34.2–53.5%. These findings validate that coupling depth constraints with stochastic optimization effectively improves navigation accuracy in complex underwater environments.
Model-aided navigation is a key approach for enhancing the positioning accuracy of autonomous underwater vehicles (AUVs). However, its precision is often degraded by model-based velocity errors arising from attitude-induced deviations and uncertainties in the mapping between propeller rotational speed and vehicle velocity. To overcome these limitations, this study proposes an attitude-compensated and acoustics-calibrated model-aided navigation framework for AUVs. The framework derives the vertical velocity from pressure sensor depth data to correct attitude-related model errors. It also dynamically refines the mapping between propeller speed and velocity using long-baseline (LBL) acoustic positioning data when LBL measurements are available. A sea trial was conducted in the South China Sea at a depth of 2000 m to verify the proposed method. The results showed that the system maintained a positional accuracy of 509 m over 5 h beyond LBL coverage. This outcome demonstrates its ability to achieve sustained high-precision navigation without external assistance.
3 June 2026 in IEEE Transactions on Instrumentation and Measurement
To address the challenges of high cost, low efficiency, and degraded positioning accuracy in Long Baseline (LBL) hydroacoustic navigation systems caused by reliance on in-situ Sound Speed Profile (SSP) measurements, this paper proposes a high-precision and efficient navigation method that operates independently of in-situ SSP data. The method constructs a parameterized SSP model symmetric about the sound channel axis, simplifying the complex sound speed field characterization into the inversion of just two key parameters: the sound speed at the sound channel axis and the gradient, thereby effectively compensating for ray bending effects. A greedy algorithm is introduced to intelligently select a high-information-density data subset that ensures both spatial distribution diversity and superior geometric configuration, significantly improving computational efficiency while maintaining parameter estimation accuracy. Furthermore, the observation model fully incorporates the continuous motion characteristics of underwater vehicles, making the travel time calculation more aligned with actual operational scenarios. Experimental validation in the South China Sea demonstrates that the proposed method, operating as a complete measurement system without in-situ SSP data, achieves a horizontal positioning root mean square error of 6.1 meters. It shows a marked improvement in both positioning accuracy and measurement stability over traditional models. The method effectively balances navigation precision with computational efficiency, presenting a practical and efficient measurement solution for high-precision LBL navigation in deep-sea environments.
Underwater Sound Speed Profile (SSP) distribution has great influence on the propagation mode of acoustic signal, thus the fast and accurate estimation of SSP is of great importance in building underwater observation systems. The state-of-the-art SSP inversion methods include frameworks of matched field processing (MFP), compressive sensing (CS), and feedforeward neural networks (FNN), among which the FNN shows better real-time performance while maintain the same level of accuracy. However, the training of FNN needs quite a lot historical SSP samples, which is diffcult to be satisfied in many ocean areas. This situation is called few-shot learning. To tackle this issue, we propose a multi-task learning (MTL) model with partial parameter sharing among different traning tasks. By MTL, common features could be extracted, thus accelerating the learning process on given tasks, and reducing the demand for reference samples, so as to enhance the generalization ability in few-shot learning. To verify the feasibility and effectiveness of MTL, a deep-ocean experiment was held in April 2023 at the South China Sea. Results shows that MTL outperforms the state-of-the-art methods in terms of accuracy for SSP inversion, while inherits the real-time advantage of FNN during the inversion stage.
1 January 2026 in IEEE Transactions on Instrumentation and Measurement