This paper is an experimental study on electroconvective flows produced by an asymmetric electric field in a cavity. It is part of a scientific project aiming to develop electrohydrodynamic (EHD) flow actuator in order to enhance heat transfer and mixing efficiency in fluidic and microfluidic systems. In this study, the EHD flow is obtained by applying a dc voltage between two electrodes (cylinder/plane) immersed in a working liquid. The produced velocity fields strongly depend on the applied voltage. Whatever may be the applied voltage, the fluid goes from the cylinder toward the plate or the other way round. The velocity fields obtained by particle image velocimetry for different potentials are analyzed in both cases with the usual mechanisms (injection and conduction) at the origin of the motion of the liquid. A discussion on the transition between injection and conduction phenomena is finally presented.
The aim of this work is to gain a better understanding of the hydrodynamics of a typical Argentinian fishing vessel in calm water. It is focused on the evaluation of total ship resistance and its components for different draughts. The 1978 ITTC Power Prediction method is used to predict total ship resistance from experiments carried out at the University of Buenos Aires towing tank. To conduct a more detailed evaluation of the flow around this hull, numerical studies at model scale are carried out with the open-source code OpenFOAM V10 and validated against experimental results. The Reynolds-Averaged Navier–Stokes (RANS) method together with Volume of Fluid (VOF) are used for the numerical procedure. The validated CFD model not only can provide more detailed information about the ship’s hydrodynamics than the EFD results but also allows for the exploration of the improvement in ship power prediction by using combined CFD-EFD methodologies. This work numerically calculates the form factor by using a double-body configuration and discusses the possibility of combining EFD results with this CFD form factor in order to improve total force prediction for this kind of ships.
1 June 2006 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
We analyze the modifications of the flow around a NACA 0015 airfoil when the flow is perturbed with an electrohydrodynamic (EHD) actuator. The device used consists of two bare electrodes flush mounted on the surface of the model operated in a discharge regime characterized by the formation of a plasma sheet contouring the body in the interelectrode space. In this study, we analyze the influence on the aerodynamic performance of the airfoil in the middle post stall regime (angle of attack»20º). The analysis is undertaken with measurements of the surface pressure distribution and of the flow fields with Particle Image Velocimetry technique. The experiments indicate that at moderate Reynolds numbers (150,000