Constructing a probabilistic assessment method is the primary task and key step in liquefaction research. This paper presents a systematic investigation into liquefaction potential evaluation methods. Through a comparative analysis of three conventional assessment methods, we identify critical limitations in existing approaches regarding accuracy and adaptability. A probabilistic ANN model was developed using field-collected standard penetration test (SPT) data from 311 liquefaction case histories. The model demonstrates superior performance with an overall accuracy of 86.17%, achieving 83.33% and 90.00% recognition rates for liquefied and non-liquefied cases, respectively. Key metrics, including precision (91.84%), recall (83.33%), and F1-score (87.38%), indicate robust discriminative capability. Comparative studies confirm the ANN model’s advantages over traditional methods in terms of prediction reliability and operational practicality. The research outcomes offer significant value for improving current liquefaction hazard assessment protocols in geotechnical engineering practice.
One of the important tasks in sand liquefaction assessment is to evaluate the likelihood of soil liquefaction. However, most liquefaction assessment methods are deterministic for influencing factors and fail to calculate the liquefaction probability by systematically considering the probability distributions of soil factors. Based on field liquefaction investigation cases, probability distribution fitting and a hypothesis test were carried out. For the variables that failed to pass the fitting and test, the kernel density estimation was conducted. Methods for calculating the liquefaction probability using a Monte Carlo simulation with the probability distribution were then proposed. The results indicated that for (N1)60, SM, S, and GM followed a Gaussian distribution, while CL and ML followed a lognormal distribution; for FC, SM and GM followed a lognormal distribution; and for d50, ML and S followed a Gaussian and lognormal distribution, respectively. The other factors’ distribution curves can be calculated by kernel density estimation. It is feasible to calculate the liquefaction probability based on a Monte Carlo simulation of the variable distribution. The result of the liquefaction probability calculation in this case was similar to that of the existing probability model and was consistent with actual observations. Regional sample differences were considered by introducing the normal distribution error term, and the liquefaction probability accuracy could be improved to a certain extent. The liquefaction probability at a specific seismic level or the total probability within a certain period in the future can be calculated with the method proposed in this paper. It provides a data-driven basis for realistically estimating the likelihood of soil liquefaction under seismic loading and contributes to site classification, liquefaction potential zoning, and ground improvements in seismic design decisions. The practical value of seismic hazard mapping and performance-based design in earthquake-prone regions was also demonstrated.
The pressuremeter test (PMT) measures in situ soil properties under the original stress state with minimal disturbance. However, interpreting PMT data for constitutive parameters remains reliant on empirical correlations, and a key challenge is the poorly understood size effect arising from the equipment dimensions. This study aims to systematically quantify such size effects to provide a scientific basis for optimizing the design of laboratory PMTs. A series of 36 PMT simulations were performed using the finite element method (FEM), incorporating the Duncan–Chang E-B hyperbolic model. Six cylindrical soil models of diameters ranging from 0.6 m to 2.4 m were established for both sand and clay, under three overburden pressures (200 kPa, 1000 kPa and 3000 kPa). The radial stress, strain distributions and borehole wall displacement were systematically analyzed. The analysis reveals that the size effect originates from the truncation of the radial strain integration path. In all cases, borehole wall displacement increases with model diameter, characterized by a steep rise for diameters below 1.2 m and a plateau for those above 1.2 m. Although clay produces larger displacements than sand, and higher stress produces larger displacements than lower stress, the identified pattern remains robust. Considering both the displacement–diameter relationship and practical cost constraints, an optimal equipment diameter of 1.2 m is recommended.
1 September 2019 in IOP Conference Series: Materials Science and Engineering
Dams breach by overtopping is a serious natural disaster. Numerical simulation, as a efficient research method, is widely used to study the failure mechanism and predict the destroyed process of earth dams. Traditional numerical methods such as the finite element method (FEM) only provide the capacity of small deformation analyses due to mesh distortion. The Material Point Method (MPM), a mesh-free method, has been worked well for large deformation analyses. In this paper, a double-point MPM is introduced to analysis the failure process of earth-filled dams due to overtopping. Finally, it shows that the MPM predicts the flow propagation, the development of breach cross section and breach longitudinal profile well. Moreover, MPM provides an alternative method for the risk assessment of dam breach.