Spatial and temporal plantar pressure distributions are important and useful measures in footwear evaluation, athletic training, clinical gait analysis, and pathology foot diagnosis. However, present plantar pressure measurement and analysis systems are more or less uncomfortable to wear and expensive. This paper presents an in-shoe plantar pressure measurement and analysis system based on a textile fabric sensor array, which is soft, light, and has a high-pressure sensitivity and a long service life. The sensors are connected with a soft polymeric board through conductive yarns and integrated into an insole. A stable data acquisition system interfaces with the insole, wirelessly transmits the acquired data to remote receiver through Bluetooth path. Three configuration modes are incorporated to gain connection with desktop, laptop, or smart phone, which can be configured to comfortably work in research laboratories, clinics, sport ground, and other outdoor environments. A real-time display and analysis software is presented to calculate parameters such as mean pressure, peak pressure, center of pressure (COP), and shift speed of COP. Experimental results show that this system has stable performance in both static and dynamic measurements.

An easily manipulated protocol for patterning of MXenes on commercial printing paper for planar micro-supercapacitors is reported, with which the fabricated devices can acquire a maximal areal capacitance of 27.29 mF cm⁻², achieving at least 460% enhancement compared to the value of advanced carbon-based planar MSCs (0.1–6 mF cm⁻²).

Flexible, wearable, and even stretchable sensors are the key components of smart electronic textiles. However, most reported flexible and wearable sensors for wearable electronics are usually fabricated in two-dimensional (2D) planar strip configurations, which cannot be properly integrated into textile structures and thus greatly degrade intrinsic properties such as the softness, flexibility, and air permeability of textiles and the aesthetic feeling of clothing. In this work, a new one-dimensional weavable strain sensing yarn consisting of an elastic polyurethane (PU) core, a conductive Ag-nanoparticles/graphene-microsheets composite sheath, and a silicone encapsulation layer was designed and fabricated through an easily manipulated protocol. Arising from the reasonable structural design and appropriate material selection, the as-fabricated strain sensor not only exhibited excellent flexibility, stretchability, and highly repeatable electromechanical stability (a repeatability error of 1.56%) but also possessed both high sensitivity (a gauge factor of nearly 500) and a relatively wide working range (0–50% applied strain) with good linearity (a correlation coefficient of 0.98). In addition, the facile, nearly all-solution-based fabrication protocol enabled the scalable production of long conductive yarns. Thus, the proper yarn length and superb mechanical properties endowed the stretchable conductive yarn with good weavability. The excellent wearability of the stretchable conductive yarn was derived from the outermost isolating, hydrophobic, and biocompatible silicone encapsulation layer. A wearable high-sensitivity strain sensing textile, fabricated by directly weaving the as-prepared yarn-based sensor, showed great potential for application to wearable textile sensors for real-time monitoring of human motions from vigorous walking to subtle and complex pronunciations. Open image in new window