A good knowledge of the quality of the satellite soil moisture products is of great importance for their application and improvement. This paper examines the performance of eight satellite-based soil moisture products, including the Soil Moisture Active Passive (SMAP) passive Level 3 (L3), the Soil Moisture and Ocean Salinity (SMOS) Centre Aval de Traitement des Données SMOS (CATDS) L3, the Japan Aerospace Exploration Agency (JAXA) Advanced Microwave Scanning Radiometer 2 (AMSR2) L3, the Land Parameter Retrieval Model (LPRM) AMSR2 L3, the European Space Agency (ESA) Climate Change Initiative (CCI) L3, the Chinese Fengyun-3B (FY3B) L2 soil moisture products at a coarse resolution of ~0.25°, and the newly released SMAP enhanced passive L3 and JAXA AMSR2 L3 soil moisture products at a medium resolution of ~0.1°. The ground soil moisture used for validation were collected from two well-calibrated and dense networks, including the Little Washita Watershed (LWW) network in the United States and the REMEDHUS network in Spain, each with different land cover. The results show that the SMAP passive soil moisture product outperformed the other products in the LWW network region, with an unbiased root mean square (ubRMSE) of 0.027 m³ m⁻³, whereas the FY3B soil moisture performed the best in the REMEDHUS network region, with an ubRMSE of 0.025 m³ m⁻³. The JAXA product performed much better at 0.25° than at 0.1°, but at both resolutions it underestimated soil moisture most of the time (bias < −0.05 m³ m⁻³). The SMAP-enhanced passive soil moisture product captured the temporal variation of ground measurements well, with a correlation coefficient larger than 0.8, and was generally superior to the JAXA product. The LPRM showed much larger amplitude and temporal variation than the ground soil moisture, with a wet bias larger than 0.09 m³ m⁻³. The underestimation of surface temperature may have contributed to the general dry bias found in the SMAP (−0.018 m³ m⁻³ for LWW and 0.016 m³ m⁻³ for REMEDHUS) and SMOS (−0.004 m³ m⁻³ for LWW and −0.012 m³ m⁻³ for REMEDHUS) soil moisture products. The ESA CCI product showed satisfactory performance with acceptable error metrics (ubRMSE < 0.045 m³ m⁻³), revealing the effectiveness of merging active and passive soil moisture products. The good performance of SMAP and FY3B demonstrates the potential in integrating them into the existing long-term ESA CCI product, in order to form a more reliable and useful product.

Persistent scatterer interferometric synthetic aperture radar (PSInSAR) technology provides a powerful tool for detecting ground surface displacements. However, one of its major limitations is an insufficient number of coherence points due to decorrelation. In this article, we propose an effective ground surface displacement monitoring approach based on the Stanford method for persistent scatterer (StaMPS). This approach dramatically increases the density of coherence points by jointly exploiting persistent scatterer (PS) and distributed scatterer (DS) points. In particular, we develop a new DS phase estimation method based on nonlinear optimization estimation (NLE) and exploit it in our approach. The NLE can obtain better DS phase noise reduction, can detect more coherence points, and requires slightly less computational time than conventional maximum-likelihood estimation (MLE). To demonstrate the effectiveness of our new approach, we apply it over 24 Envisat SAR images acquired over Tucson, Arizona in the USA. The coherence pixel density is increased substantially (> 6 times) compared with the conventional StaMPS-based PSInSAR approach. As for the improvement of our NLE over MLE, it can detect 11.7% more coherence pixels, can achieve better phase noise reduction, and needs approximately one third less computational time. These results validate the effectiveness of our new approach and suggest its great potential for land displacement measurements.

The first evaluation of GaoFen-3 SAR radiation characteristics and its potential for quantitative parameter estimation in land surface is presented in this letter. Based on two triangle corner reflectors, five impulse response property parameters are calculated to assess image quality of GaoFen-3 SAR, and results show that the peak sidelobe ratio is superior to system specification and the integrated sidelobe ratio cannot be assessed by misconduct in the field campaign mainly for strong background scattering (not low enough). Five distributed target parameters are extracted from three categories and compared with Radarsat-2 and Sentinel-1A quasi-synchronous images in two days. The results indicate good radiometric resolution (RR) of 3 dB and good equivalent number of looks closed to 1 for GaoFen-3 single-look complex product, which proves GaoFen-3 SAR image is at the same quality level with the other two C-band SAR images and its RR meets system design of 3.5 dB. Then, the backscatter coefficient of these three SAR images is compared at bare soil area after GaoFen-3's incidence angle being normalized to 43° by Oh2004 empirical model, and the results reveal the problem of several decibels lower for GaoFen-3 in absolute radiometric calibration. Finally, the capability of surface parameter estimation is justified by statistical relation of GaoFen-3 co-polarization backscatter coefficient and bare soil moisture content, indicating its good potential for quantitative applications in land after solving the problem in calibration.

Snow density is an important variable in snowpack research. The comprehensive applicability evaluation of the snow density datasets is a prerequisite of these datasets for their applications in hydrology processes and climate change, as well as in snow equivalent water retrieval algorithms. In this letter, the applicability of three snow density datasets, including European ReAnalysis (ERA)-Interim, ERA5, and the newly released ERA5-Land datasets, was first assessed using two ground evaluation datasets with different land covers from seven snow survey courses and four densely sampled networks in China. The results show that the ERA-Interim dataset significantly overestimates snow density during the entire snow season, with an overall root mean square error (RMSE) larger than 112 kg/m3, and lacks temporal dynamics. The ERA5 and ERA5-Land datasets are generally in good agreement with the ground measurements in China. The averaged RMSEs of the ERA5 dataset are 56.2 kg/m3 against snow course sites and 28.3 kg/m3 versus the densely sampled measurements, and those of the ERA5-Land dataset are 56.6 and 28.4 kg/m3, respectively. However, the ERA5 and ERA5-Land datasets still underestimate snow density over time, especially for the middle and late snow seasons. These new findings are expected to provide valuable feedback to model developers to further enhance the accuracy of snow density datasets.

As the second generation of Chinese polar-orbiting meteorological satellite missions, the Fengyun (FY)-3D satellite provides the latest multi-frequency brightness temperature (TB) of FY-3 series satellites. The microwave radiation imager (MWRI) boarded on FY-3D has similar sensor configuration as Advanced Microwave Scanning Radiometer 2 (AMSR2), and thus the intercalibration of these two sensors can make their TB data more consistent and continuous to facilitate their joint applications. In this study, the FY-3D H-pol and V-pol TB at five frequencies from 10.7 to 89 GHz during 2019 to 2020 were calibrated against AMSR2 TB over land. Two categories of intercalibration methods were compared, including global intercalibration method, i.e., global linear regression, and per-pixel-based intercalibration methods, i.e., per-pixel linear regression joint global linear regression, per-pixel linear regression joint inverse distance interpolation, per-pixel linear regression joint nearest neighbor interpolation, and global per-pixel linear regression. Furthermore, the effects of diverse environmental variables (i.e., land cover and its heterogeneity, climate types, water body fraction, terrain and its complexity, soil texture, and vegetation coverage) on FY-3D calibration accuracy were fully investigated. The results indicate that all five approaches can reduce the bias between FY-3D and AMSR2 TB, and the root-mean-square difference (RMSD) also reduces accordingly. Among them, the global per-pixel linear regression method performs the best with the lowest averaged RMSD of 2.93 K (at ascending overpass) and 2.34 K (at descending overpass), followed by the per-pixel linear regression joint inverse distance interpolation. The global linear regression method performs the worst with the largest RMSD of 4.69 and 3.82 K at ascending and descending overpass, respectively. The RMSD is relatively larger in temperate and polar climate zones, as well as in grasslands and croplands than in other climate and land cover types. The calibration errors generally decrease as the altitude increases, while they increase with the increase in land cover heterogeneity. The water body fraction exerts the greatest impact on the calibration accuracy, and the RMSD reaches 3 K when the water body fraction is greater than 15%. Soil texture, terrain complexity, and vegetation coverage generally have little influence on the calibration accuracy. These findings can provide a good reference for the intercalibration of satellites with similar configuration to generate long-term climate data records.

The self-designed HaiYang-2B (HY-2B) satellite was launched on 24 October 2018 in China at 22:57 UT in a 99.34° inclination sun-synchronous orbit. The Scanning Microwave Radiometer (SMR) on the core observatory has the capability to provide near-real-time multi-channel brightness temperature (Tb) observations, which are designed mainly for improving the level of marine forecasting and monitoring, serving the development and utilization of marine resources. After internal calibration and ocean calibration, the first effort to retrieve land surface snow parameters was performed in this study, which obtained extremely low accuracy both in snow extent and snow mass. Accordingly, land inter-sensor calibration was carried out between SMR and the Advanced Microwave Scanning Radiometer 2 (AMSR2) in order to broaden the research and application of SMR data on the Earth’s land surface. Finally, we evaluated the consistency of the snow extent and snow mass derived from the initial and land-calibrated SMR data. The results indicated that a systematic SMR cold deviation whose magnitude depends on the channel is present for all the compared channels. After intercalibration, the conformity of the snow extent and snow mass were substantially improved compared to before; the relative bias of the snow extent and snow mass decreased from −49.97% to 2.97% and from −51.71% to 3.01%, respectively.