This paper presents an integrated polar microstructure and template-matching method for optical position measurement that is developed based on the technology of ultra-precision machining (UPM) and computer vision. For computer vision, this paper makes use of the template-matching method as the basic working principle to match the position on the surface. For UPM, an optical microstructure that is named a ‘polar microstructure’ is purposely designed and fabricated by ultra-precision diamond machining technology to provide the high resolution of the position measurement. To demonstrate the performance of the proposed method for optical position measurement, a high-precision multi-sensor coordinate measuring machine was used to test the position accuracy and the length uncertainty for the two axes of this positioning method. The experimental results show that the average length uncertainty and the corresponding standard deviation errors are 109.6 nm and 76.4 nm on the X-axis, and 91.8 nm and 69.7 nm on the Y-axis, respectively.
26 November 2016 in The International Journal of Advanced Manufacturing Technology
In this paper, a novel six degrees-of-freedom (DOF) hybrid kinematic machine (HKM) is designed, analyzed, and evaluated for precision polishing. The design adopts a 3-DOF tripod-based parallel mechanism (PM) to locate the workpiece, a 2-DOF serial mechanism (SM) to orient the polishing tool, and a functional extension limb to provide a redundant DOF when polishing the workpieces with axially symmetrical shapes. Compared with the existing HKMs, the most distinctive feature is that the position and orientation adjustments of the tool with respect to the workpiece are decoupled during the synchronous machining, thus allowing the rotational tool center point (RTCP) function to be conveniently realized. For the developed HKM, the kinematics are studied systematically, including position, velocity, acceleration, and workspace. The dynamic model of the PM is derived by employing the principle of virtual work. For a pre-defined trajectory, the required driving forces are obtained through dynamic simulation. Based on these analyses, a laboratory prototype of the HKM is designed and developed. A preliminary accuracy assessment of the HKM is implemented with a double ball-bar, and a series of polishing experiments are conducted to show the capacity and feasibility of the developed HKM.
8 June 2023 in IEEE Transactions on Instrumentation and Measurement
The method of diamond tool defect detection using deep learning technology is a novel algorithm in engineering applications. The method combining machine vision and image processing can realize the intuitive and rapid detection of tool defects. Obtaining good performance using these methods largely relies on a considerable number of training samples, which hinders their wide application in the field of diamond tool defect detection. This paper presents an approach designed using small sample data to address this issue. First, a data augmentation algorithm is implemented by generative adversarial networks (GANs) based on existing defective data samples and the principle of image-to-image translation. With the support of the trained network model, numerous defect-free diamond tool images are transformed into diamond tool images with defects. Besides, the image generation results in three annotation modes are compared, and the image generation results that perform well are selected. According to the characteristics of image fusion, some generated defects are combined with the original image to synthesize the fusion-generated image with a better effect. Then, a large data set composed of generated samples combined with real tool defect image samples is employed to detect diamond tool defects. The method is applied to the experiment of diamond tool sharpening quality detection, and the average accuracy of network recognition can be improved by 8.4% after using the augmented data set. Compared with the data augmentation method using image cutting and flipping, the method proposed in this paper also has a 1.6% improvement.
Ultrasonic vibration-assisted cutting (UVAC) has been regarded as a promising technology to machine difficult-to-machine materials such as tungsten carbide, optical glass, and hardened steel in order to achieve superfinished surfaces. To increase vibration stability to achieve optical surface quality of a workpiece, a high-frequency ultrasonic vibration-assisted cutting system with a vibration frequency of about 104 kHz is used to machine spherical optical steel moulds. A series of experiments are conducted to investigate the effect of machining parameters on the surface roughness of the workpiece including nominal cutting speed, feed rate, tool nose radius, vibration amplitude, and cutting geometry. This research takes into account the effects of the constantly changing contact point on the tool edge with the workpiece induced by the cutting geometry when machining a spherical steel mould. The surface morphology and surface roughness at different regions on the machined mould, with slope degrees (SDs) of 0°, 5°, 10°, and 15°, were measured and analysed. The experimental results show that the arithmetic roughness of the workpiece increases gradually with increasing slope degree. By using optimised cutting parameters, a constant surface roughness of 3 nm to 4 nm at different slope degrees was achieved by the applied high-frequency UVAC technique. This study provides guidance for ultra-precision machining of steel moulds with great variation in slope degree in the pursuit of optical quality on the whole surface.