Tao Wan

Dr. Tao Wan

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 March 2015 in Journal of Canadian Petroleum Technology
Verified
Journal Article
Closed access
TWTao Wan
Tao Wan
JSJames J. J Sheng
James J. J Sheng
Gas injection is considered as an effective recovery process that has been widely used in the worldwide oil industry. There are limited pilot field projects conducted on enhanced-oil-recovery (EOR) process by gas injection in shale-oil reservoirs. Although numerous studies have been conducted on gas injection in tight gas or oil reservoirs, the main recovery mechanism in shale-oil reservoirs is not well-understood. Diffusion plays an important role in the oil-recovery process in fractured-shale reservoirs. Most of the current studies on diffusion are performed in such a way that the producing pressure is equal to the initial reservoir pressure or core pressure; thus, the convective displacement is eliminated or minimized. One of the challenges is to evaluate the role of diffusion in field-scale displacements in the presence of viscous flow. This paper discusses the role of diffusion in improving oil recovery in fractured shale-oil reservoirs. Hoteit and Firoozabadi (2009) investigated the diffusion effect on recovery performance in a fractured gas/condensate reservoir. Their simulation results showed that molecular diffusion has a significant effect on gas recovery if the reservoir pressure is below the minimum miscible pressure. Modelling of the diffusion effect on ultimate oil recovery in extensively fractured shale reservoirs is crucial to the development of these marginal shale-oil or -gas projects. Evaluation of the recovery contribution from diffusion will provide important insights into the recovery mechanisms in intensely fractured shale-gas/oil reservoirs. Currently, a majority of the diffusion models were developed on the basis of the single porosity model that demands tremendous grid refinement in intensely fractured shale-oil reservoirs. The grid refinement is necessary for surrounding the fracture intersections, which makes the system become computationally expensive. In this paper, the matrix/matrix and matrix/fracture diffusion is coupled in a dual-permeability model to overcome the drawback of the single-porosity model. The simulation results demonstrate that the EOR by gas injection in the Eagle Ford shale-oil reservoir will benefit from matrix/matrix and matrix/fracture molecular diffusion.


1 March 2018 in Fuel
Verified
Journal Article
Closed access
TWTao Wan
Tao Wan
WWWeimin Wang
Weimin Wang
JJJiaqi Jiang
Jiaqi Jiang
YZYuandong Zhang
Yuandong Zhang

1 December 2015 in Journal of Unconventional Oil and Gas Resources
Verified
Journal Article
Closed access
TWTao Wan
Tao Wan
YYYang Yu
Yang Yu
JSJames J. J Sheng
James J. J Sheng

14 August 2013
Verified
Conference Paper
Closed access
TWTao Wan
Tao Wan
JSJames J. J Sheng
James J. J Sheng
MSM.Y. Soliman
M.Y. Soliman
URTeC 1611383 The current technique to produce shale oil is to use horizontal wells with multi-stage stimulation. However, the primary oil recovery factor is only a few percent. The low recovery and the abundance of shale reservoirs provide a huge potential for enhanced oil recovery. Well productivity in shale oil and gas reservoirs primarily depends upon the size of fracture network and the stimulated reservoir volume (SRV) which provides highly conductive conduits to communicate the matrix with the wellbore. The natural fracture complexity is critical to the well production performance and it also provides an avenue for injected fluids to displace the oils. However, the disadvantage of flooding in fractured reservoirs is that the injected fluids may break through to production wells via the fracture network. Therefore, a preferred method is to use cyclic gas injection to overcome this problem. In this paper, we use a numerical simulation approach to evaluate the EOR potential in fractured shale oil reservoirs by cyclic gas injection. Simulation results indicate that the stimulated fracture network contributes significantly to the well productivity via its large contact volume with the matrix, which prominently enhances the macroscopic sweep efficiency in secondary cyclic gas injection. In our previous simulation work, the EOR potential was evaluated from planar traverse fractures. In this paper, we examine the EOR potential by including the effect of fracture networks. Therefore, a higher oil recovery potential is demonstrated. The impacts of fracture spacing density and stress dependent fracture conductivity on the ultimate oil recovery are also investigated. In a case where the fracture network spacing is 100 ft and the fracture network is 100% stimulated, it can achieve more than 60% of incremental oil recovery. The results presented in this paper demonstrate an EOR potential by cyclic gas injection in fractured shale oil reservoirs.

12 April 2014
Verified
Conference Paper
Closed access
PDF file
TWTao Wan
Tao Wan
XMXingbang Meng
Xingbang Meng
JSJames J. J Sheng
James J. J Sheng
MWMarshall Watson
Marshall Watson
Cyclic gas injection is considered as an effective and quick responding recovery process that has been widely used in the worldwide. Studies showed that cyclic gas injection combined with modern technologies such as horizontal well drilling and hydraulic fracturing has achieved promising results in low permeability formation. Cyclic gas injection technique was introduced in our earlier publication for improving oil recovery in stimulated fractured shale oil reservoirs. In this paper, we focus on the effect of injected gas composition and fracture properties on oil recovery. Different injection gas scenarios such as lean gas, rich gas and CO2 were included in the simulation in order to analyze the EOR mechanisms of vaporizing, condensing or a combined condensing/vaporizing process. Our simulation results indicate that the stimulated natural fractures are critical to enhancing oil recovery and well productivity performance in shale oil reservoirs. Since the interaction of the induced hydraulic fractures with pre-existing natural fractures and fissures makes the hydraulically fractured reservoir modeling very challenging in shale oil/gas reservoirs, we can use a dual-continuum model by making changes to the fracture permeability and intensity to attain a better characterization of the natural fractures. We conclude that cyclic gas injection in shale oil reservoirs employing hydraulically stimulated fractures is feasible to improve substantial amounts of oil production than primary production.