Assessing the condition of historical sites at risk requires an interdisciplinary approach based on combining multiple measurement technologies. Due to the dynamic development of technology, non-invasive remote sensing methods are gaining significant importance. Among these techniques is photogrammetry based on images taken from unmanned aerial vehicles (UAVs) and those taken with a smartphone. In the study, the authors specified the possibilities and limitations of using remote photogrammetric methods to build accurate digital models of the walls of historic buildings with cracks in them. Point clouds, TIN grids, and façade orthophotos were examined. Statistical analysis was used to determine the repeatability of the data. Two parameters were identified that affect the accuracy of the data: the first – the direction of the segment between two points in the façade plane, and the second – the distance of the segment between two points in the plane of the façade. The study showed that the average accuracy of crack width measurements on the data acquired with the DJI Mavic 3 Enterprise RTK is 1 mm. Testing of crack width measurements using a Samsung Galaxy S20 FE smartphone showed an average absolute error of 0.24 mm. Based on the results, it was concluded that the imagesacquired using mobile devices can be used to determine changes in crack widths on walls.
21 April 2026 in Reports on Geodesy and Geoinformatics
The study addresses the problem of detecting displacements of building walls using terrestrial laser scanning (TLS) data and machine learning methods. Traditional displacement measurement techniques are often time-consuming. They are also limited in capturing the full geometry of monitored objects. In response, this research proposes a methodology based on the analysis of geometric and radiometric features extracted from point clouds. Controlled experiments were conducted with a geodetic rosette equipped with distance-measuring prisms, which were displaced in the XY plane by 4 mm, 9 mm, and 13 mm. Data were recorded with a Leica RTC360 scanner from three stations, yielding nine point clouds. Selected features describing differences between corresponding points in the reference and displaced series were used as input for neural network models. Both binary classification (displacement/non-displacement) and multi-class classification (0, 4, 9, 13 mm displacement) were performed. The results demonstrated high classification accuracy: 99.1% for binary models and 96.0% for multi-class models. Feature ranking revealed that geometric attributes, such as displacement vector length, curvature, and normal vectors, were the most relevant for model training, while color features had minor importance. The study confirmed that scanner position and incidence angle of the laser beam strongly affect classification quality. The developed procedure proved effective in detecting displacements that occur in directions parallel to the plane of building walls. The conclusions drawn from the research constitute a valuable contribution to the theory of monitoring building structures using TLS.
23 March 2024 in Reports on Geodesy and Geoinformatics
The “Kłodawa” salt mine, due to geological conditions and continuous salt extraction, is subject to a range of measurements documenting the speed of changes in the geometry of the chambers. Cyclic surveys are conducted under challenging conditions several hundred metres underground. Consequently, measurement methods used for determining the parameters of the ongoing clamping should be of high precision but also be resistant to dense dust (in fields of active mining) and strong gusts (near ventilation shafts). The research presented here concerns the analysis of the possibilities of solutions offered by modern technologies in mine conditions. Test measurements were conducted at observation stations using linear bases stabilized with metal pins. The base points were located in the aisles, ceiling, and bottom of the chamber in Field 1 of “Kłodawa” salt mine at the depth of 600m. Point clouds mapping the object were acquired using a Leica RTC360 3D laser scanner and two mobile devices: Motorola G100 smartphone and iPad Pro with LiDAR technology using the Pix4Dcatch application. The accuracy of the point cloud from the Leica RTC360 3D laser scanner was determined by comparing it with classic measurements taken with a Leica Disto laser rangefinder. The repeatability and accuracy of the point cloud from a smartphone were examined using statistical analysis based on Pearson’s correlation coefficient and cross-correlation. An attempt was also made to approximate the correlation between the obtained errors and two parameters: the number of images and the size of the object.
21 March 2025 in Reports on Geodesy and Geoinformatics
Road upgrading to increase freight and passenger transport capacity requires surveying services, carried out at every stage of construction. During the construction of road sections designed as curves or arcs, their shape must be constantly monitored. During surveying, it is necessary to determine the elements of curves, in particular the radius and length of the curve, as well as the bisector, tangents, and angle of return of the tangents. The article presents a methodology for determining the radii of curves on highways using a GNSS system receiver with planar rectangular coordinates derived through post-processing using the Trimble Geomatics Office (TGO) software. In addition, the authors present the results of measurements of the height markers of the bottom layer of the substructure on the section from measuring point 1015+40 to measuring point 1020+00 of the Astana-Petropavlovsk highway. On the test object, tests were carried out on the technical condition of the pavement. The results were determined by the parameter. The highway section was also examined geometrically on the basis of levelling measurements. The paper proposes a methodology for road construction work that divides the measurements into two stages: initial — based on GNSS technology, and a second one — based on the levelling method.