The constant-phase-element behavior measured for passive films was analysed using the power law model. It allows to obtain the variation of the resistivity through the passive film thickness. To avoid many unknown parameters required for the model, a methodology to analyze the impedance diagrams has been described. It is illustrated with several examples. First, the resistivity profiles were obtained for a Ni-20Cr alloy immersed in solutions with different pH values to validate the proposed methodology. The dielectric properties of the passive films were discussed from the duplex character of these passive layers. It was shown that the shape of the resistivity profile could be attributed to the contribution and the thickness of the inner dense oxide and the outer hydroxide layers, respectively. Then, the second example provided information on the evolution of the behavior of the passive film formed on 316L stainless steel under irradiation.
The role of the alloy composition of binary Ni–xCr alloys (x = 16, 20, 24, 28 wt.%) and ternary Ni–xCr–8Fe alloys (x = 14, 22, 30 wt.%) in borate buffer solution on the passive and transpassive behavior was investigated using successive electrochemical impedance measurements. These measurements supplement conventional polarization curves by enabling monitoring of the evolution of the electrochemical parameters extracted from impedance diagrams (thickness, resistivity at interfaces, etc) during the polarization. The polarization curves and evolution of the impedance parameters revealed that the Cr content and addition of Fe did not significantly affect the behavior of the alloys within the passive potential domain but directly affected the transpassivation process at higher potentials. For the Ni–xCr alloys, a higher Cr content resulted in a higher current-density peak for the transpassivation–second passivation processes. Conversely, the addition of Fe reduced or even prevented the appearance of this current-density peak. X-ray photoelectron spectroscopy analysis provided complementary information to help explain the role of alloying elements in the passivation (and secondary oxidation) mechanisms of Ni-based alloys in borate buffer solution.