For monitoring animal adaptation when facing environmental challenges, and more specifically when addressing the impacts of global warming—particularly responses to heat stress and short-term fluctuations in osmotic regulations in the different organs influencing animal physiology—there is an increasing demand for digital tools to understand and monitor a range of biomarkers. Microneedle arrays (MNAs) have recently emerged as promising devices minimally invasively penetrating human skin to access dermal interstitial fluid (ISF) to monitor deviations in physiology and consequences on health. The ISF is a blood filtrate where the concentrations of ions, low molecular weight metabolites (<70 kDa), hormones, and drugs, often closely correlate with those in blood. However, anatomical skin differences between human and farm animals, especially large animals, as well as divergent tolerances of such devices among species with behavior specificities, motivate new MNA designs. We addressed technological challenges to design higher microneedles for farm animal (pigs and cattle) measurements. We designed microneedle arrays composed of 37 microneedles, each 2.8 mm in height, using dextran-methacrylate, a photo-crosslinked biocompatible biopolymer-based hydrogel. The arrays were characterized geometrically and mechanically. Their abilities to perforate pig and cow skin were demonstrated through histological analysis. The MNAs successfully absorbed approximately 10 µL of fluid within 3 h of application.
Ti 40 Cu 36 Zr 10 Pd 14 metallic glass is often considered a promising candidate for biomedical applications, in particular for the manufacturing of small size dental implants. Nevertheless, its processing and limited glass-forming ability leads to the appearance of crystalline spheres called "spherulites". These spherulites play a major role in the deformation behaviour of this alloy. It is therefore a critical issue for its future industrial use to identify their nature and better understand their growth process to enable control of their size distribution and localisation. This article presents a detailed description of the microstructure of these crystalline defects, from the sub millimetre to nanometric scales, using transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS)/electron backscatter diffraction (EBSD) coupled with scanning electron microscopy and X-ray diffraction characterisation. Several phases are identified thanks to the combination of EDS/EBSD and TEM information, in particular a TiCu B2 phase, analogous to the ZrCu B2 phase usually present in other composite metallic glasses. The presence of other phases such as Ti 2 Cu 3 and CuTi 3 phases is also detected. The spherulites are studied at different times during their growth process, and a growth scenario is proposed based on the characterisation observations. However, the nucleation step of the spherulites remains unclear despite the in-depth investigation. Thus, different hypotheses are discussed.
Aspect critique des verres métalliques base Ti pour les applications biomédicales : Enquête sur les défauts de coulée et sur la sensibilité à la corrosion: Une grande majorité des implants dentaires sont actuellement fabriqués en titane et ses alliages. Ces implants dentaires présentent de très bonnes propriétés et présentent d'excellents résultats cliniques, bien qu'ils aient maintenant atteint un plateau en termes de propriétés mécaniques et de résistance à la corrosion. La tendance actuelle est de diminuer la taille des implants pour préserver le capital osseux des patiens, mais aussi pour se débarrasser des éléments potentiellement nocifs et d'accélérer la reconstruction osseuse autour de l'implant. Les alliages amorphes à base de titane ont été décrits dans la littérature comme des biomatériaux très prometteurs, avec des propriétés de résistance mécanique et des propriétés de corrosion très élevées. Cependant, il n'existe pas encore de dispositifs médicaux en verre métallique sur le marché des dispositifs médicaux implantables... Dans le cadre de ce travail de thèse, le cas du Ti40Cu36Zr10Pd14 BMG a été étudié comme l'un des matériaux les plus prometteurs pour la fabrication d'implants dentaires pour fabriquer des implants dentaires peu invasifs. Nous nous concentrons ici sur deux inconvénients majeurs, peu mentionnés dans la littérature. Premièrement, sa résistance à la corrosion est limitée. Deuxièmement, pendant sa fabrication (en coulée par succion dans un moule en cuivre), des défauts cristallins sphériques (souvent appelés sphérulites) apparaissent et peuvent compromettre gravement sa résistance à la traction. La première partie du manuscrit se concentre sur l'impact de ces sphérulites sur les propriétés mécaniques et la résistance à la corrosion. La deuxième partie traite l'identification du mécanisme de nucléation/croissance de ces sphérulites. La troisième partie traite de l'influence des paramètres de coulée sur l'apparition de ces sphérulites et le manque de fiabilité du procédé de fabrication. Enfin, une dernière partie plus exploratoire se concentre sur l'alliage mère de la nuance Ti40Cu36Zr10Pd14 et l'intérêt de modifier la composition atomique pour surmonter les deux inconvénients majeurs mentionnés ci-dessus.
For monitoring animal adaptation when facing environmental challenges, and more specifically when addressing the impacts of global warming—particularly responses to heat stress and short-term fluctuations in osmotic regulations in the different organs influencing animal physiology—there is an increasing demand for digital tools to understand and monitor a range of biomarkers. Micro-needle arrays (MNAs) have recently emerged as promising devices minimally invasively penetrating human skin to access dermal interstitial fluid (ISF) to monitor deviations in physiology and consequences on health. The ISF is a blood filtrate where the concentrations of ions, low molecular weight metabolites (< 70 kDa), hormones, and drugs, often closely correlate with those in blood. However, anatomical skin differences between human and farm animals, especially large animals, as well as divergent tolerances of such devices among species with behavior specificities, motivate new MNAs design. We addressed technological challenges to design higher microneedles for farm animals (pigs and cattle) measurements. We designed micro-needle arrays composed of 37 microneedles, each 2.8 mm in height, using dextran-methacrylate, a photo-crosslinked biocompatible biopolymer-based hydrogel. The arrays were characterized geometrically and mechanically. Their abilities to perforate pig and cow skin were demonstrated through histological analysis. The MNAs successfully absorbed approximately 10 µL of fluid within 3 hours of application.