Redi Bintarto

Dr. Redi Bintarto

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 December 2022 in Salud, Ciencia y Tecnología
Verified
Journal Article
Open access
PDF file
RBRedi Bintarto
Redi Bintarto
APAnindhito Purnowidodo
Anindhito Purnowidodo
DDDjarot Darmadi
Djarot Darmadi
TWTeguh Dwi Widodo
Teguh Dwi Widodo
The increasingly widespread use of galvanized roofs certainly has an effect on the occupants in the room below. Among them is a hot room temperature. For that reason, it is necessary to make new discoveries in the field of composites of natural materials to overcome them because most natural materials, especially natural stone, have low thermal conductivity, which means they can inhibit heat propagation. This study sought to ascertain how much andesite natural stone powder, combined with epoxy, can lower the room temperature when it is layered on a galvanized roof. Different amounts of natural stone powder applied to a galvanized roof results in different thermal conductivities. The temperature readings were taken at a height of 20 cm above the roof, right at the bottom galvanic, as well as the temperature in the room below. Our results showed that adding andesite natural stone powder to the roof was able to lower the room temperature, and the thicker the composite layer in coating the galvanized roof, the lower the room temperature under the roof

23 November 2024 in Composites Part C: Open Access
Verified
Journal Article
Open access
RBRedi Bintarto
Redi Bintarto
APAnindito Purnowidodo
Anindito Purnowidodo
DDDjarot Darmadi
Djarot Darmadi
TWTeguh Dwi Widodo
Teguh Dwi Widodo

1 January 2023 in FME Transactions
Verified
Journal Article
Open access
PDF file
RBRedi Bintarto
Redi Bintarto
APAnindito Purnowidodo
Anindito Purnowidodo
WDWidodo Teguh Dwi
Widodo Teguh Dwi
MTMarco Talice
Marco Talice
DDDjarot B. Darmadi
Djarot B. Darmadi
The ability of a roof to absorb heat is crucial for maintaining temperature stability within a room. Therefore, natural material composite coatings utilization offers a viable option for modern roof development. This research investigates how using natural stone mixed with epoxy, and applied as a coating on a galvalume surface, influences thermal conductivity and reduces room temperature. Temperature measurements were collected around a small room with a composite-coated roof, utilizing different types of rock in the composition. Thermocouples were placed 20 cm above the roof's surface, attached to the roofing composite, positioned beneath the galvalume layer, and within the small room. The results demonstrate a reduction in thermal conductivity and room temperature when natural stone powder is added to the roof. Experiments using composite coatings with various stone types exhibit varying degrees of room temperature reduction. Consequently, this research concludes that the unique properties of natural stone can effectively lower the thermal conductivity of roofs and decrease room temperature.

29 March 2019 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
RBRedi Bintarto
Redi Bintarto
NHNurkholis Hamidi
Nurkholis Hamidi
RRRudianto Raharjo
Rudianto Raharjo
TWTeguh Dwi Widodo
Teguh Dwi Widodo
Natural Stones product from Indonesia frequently used as product of pottery and medical devices. However, characteristics variation and hardness divergence level of natural stone (dolomite) causes differences in the requirements of machine parameters on the manufacturing of it. Especially for the process of cylindrical shape of dolomite cups. The machinery parameters of dolomite that baffle. Consequently, the process of dolomite cups manufactures becomes not optimal and need to investigate about the effect of machining parameters to the process of dolomite cups, so that the surface of the dolomite cups products can be smoother to the maximum to reduce finishing time. The first step to investigate in this research is to test the material characteristics and hardness test on dolomite cups originating from Malang Regency, Indonesia. Based on the data of hardness and characteristic test, generated the value of cutting speed, Feed and deep of cut with 3 different parameter levels. The result of the machining process is further tested by surface roughness measurement, which then obtained the results of surface roughness values of each level parameter. From the data collected could be generated that the value of cutting speed is directly proportional to the level of surface roughness, on the other hand for feed and deep of cut inversely proportional to the level of surface roughness of the dolomite cups turning process. It can be concluded that to get the result of surface of workpiece of dolomite cups with low surface roughness can be done by choosing high cutting speed, while feed and deep of cut chosen as small as possible. By the data gaining from the research found that the optimal parameter which result of the smoothest surface occurs in the 900m/min cutting speed, 0,06mm/rev feed and 0,1mm deep of cut.

15 July 2025 in Mechanical Engineering for Society and Industry
Verified
Journal Article
Open access
PDF file
TWTeguh Dwi Widodo
Teguh Dwi Widodo
RRRudianto Raharjo
Rudianto Raharjo
RBRedi Bintarto
Redi Bintarto
AAAsri Anjasari
Asri Anjasari
AWArif Wahyudiono
Arif Wahyudiono
MAMuhammad Zaimi Bin Zainal Abidin
Muhammad Zaimi Bin Zainal Abidin
This work investigates grape seed oil as a green substitute for conventional mineral-based cutting fluids to reach sustainable manufacturing methods. The application of grape seed oil as a cutting fluid in the machining of 316L stainless steel using the MQL method has not been documented in prior research studies. In this work, the study focuses on determining the effect of the grape seed oil on the surface integrity and comparing these findings to standard dry machining conditions by examining surface topography, roughness, and corrosion resistance at three different spindle speeds (1500, 1800, and 2100 rpm). Results of experiments showed that grape seed oil greatly improved surface quality and corrosion resistance. Surface roughness dropped noticeably by 61.6% at 1500 rpm as opposed to dry machining. Likewise, changes in surface roughness noted were 54.0% at 1800 rpm and 54.9% at 2100 rpm. Furthermore, the potentiodynamic polarization data show that the grape seed oil greatly prevents post-machining corrosion of 316 L stainless steel. The corrosion rates of the material face milled using grape seed oil were decreased by 78.6%, 74.6%, and 80.8% at spindle speeds of 1500, 1800, and 2100 rpm, respectively, when compared with dry face milling. These results indicate that grape seed oil demonstrates its ability as a cutting fluid even for high-speed machining operations. Hence, grape seed oil can address industrial demands for more environmentally friendly manufacturing methods.

10 September 2024 in EUREKA: Physics and Engineering
Verified
Journal Article
Open access
PDF file
RBRedi Bintarto
Redi Bintarto
APAnindito Purnowidodo
Anindito Purnowidodo
DDDjarot Darmadi
Djarot Darmadi
TWTeguh Dwi Widodo
Teguh Dwi Widodo
The increasing amount of paper waste can be enhanced in its utility by transforming it into composites to utilize it as a technology for coating metal roofs to absorb heat. Various paper types have been proven to reduce heat inside the room below when applied to Galvalume roofs. Therefore, multiple types of paper waste are highly suitable for metal roof coatings. This research investigates whether differences in the types of paper mixed with epoxy and applied to the surface of Galvalume roofs will affect the temperature reduction inside the room. These differences in paper types also affect the level of thermal conductivity when measured with the same instruments and dimensions. Data were obtained by mixing small-sized cut paper materials and layering them on Galvalume sheets with the help of epoxy as an adhesive. The temperature data collection process was conducted by preparing 6 boxes with 4 thermocouples supplemented with thermal imaging testing. To broaden the analysis, images of the roof were also taken and analyzed for color to assess the extent of sunlight absorption and reflection on the roof. Four thermocouples were placed 20cm above the roof, above the composite, below the Galvalume, and 40cm below the roof or inside the room. Thermal conductivity data were analyzed separately and integrated with roof color data, further corroborated with temperature data collected by the thermocouples. The four sensors can determine the temperature inside and around the room, focusing on the temperature around the installed composite roof. The analysis shows that adding paper and epoxy-based composites can reduce the thermal conductivity of Galvalume roofs and lower the temperature inside the room below it. Compared to a Galvalume roof without coating, the composite coating with cardboard paper is the most effective, with an estimated average room temperature reduction of 1.9 degrees Celsius. For reducing the air temperature above the roof, the newspaper coating is the best choice, with an estimated average temperature decrease of 2.6 degrees Celsius