Superfine optical components are necessary for advanced engineering applications such as x-ray optics, high-power lasers, lithography, synchrotron optics, laser-based sensors, etc. Fabrication of such superfine surfaces is one of the major challenges for optical and semiconductor industries. This research focuses on the development of a magnetic nanoparticle-based nanoabrasive for superfine optical polishing. The superparamagnetic iron oxide nanoparticle (SPION)-based nanoabrasive is synthesized via a hydrothermal route by employing cost-effective precursors. Detailed characterizations of the prepared nanoabrasive are presented. Transmission electron microscopy results confirm the irregular cubic and spherical shaped morphology of the SPION nanoabrasive along with particle size distribution varying from 10–60 nm, enabling the homogenous cutting effect of the aqueous slurry for polishing. Furthermore, the high surface area and pore size are determined by Brunauer–Emmet–Teller analysis and found to be and 6.13 nm, respectively, providing homogenous distribution of the nanoabrasive on the surface of a BK7 substrate for material removal. Application of the developed SPION abrasive is demonstrated for superfinish optical polishing on a BK7 optical disc. The experimental polishing results show superfine surface finishing with an average roughness value of 3.5 Å. The superparamagnetic property of the developed nanoabrasive is confirmed by alternative gradient magnetometry, and it helps in recovering the used nanoabrasive after polishing. Moreover, the polishing performance of the SPION nanoabrasives is compared with a cerium nanoabrasive, which is also synthesized in this study.
13 August 2018 in Journal of Mechanical Science and Technology
Aspheric optics is widely used for many optical applications due to their advantages, that is, light weight, cost-effectiveness and efficiency. There are many fabrication challenges which affect the quality of aspheric optics used for infrared-based applications. Diamond turning is one of the most suitable techniques for fabrication of infrared aspheric lens with high profile accuracies, due to its deterministic approach. However, for optics with large sag value, multiple machining cycles are required to make the best fit surface. Repeated machining cycles result in generation of inherent stresses leading to subsurface deformation and poor quality. In this study, hybrid approach of grinding and machining is proposed for fabrication of silicon infrared optics in large volume. The proposed approach results in reduced fabrication time and subsurface deformation with improved surface quality and tool life. The profile accuracy after compensation of profile error ( Pt) is 0.21 µm and surface roughness ( Ra) 10.5 nm is achieved.
6 March 2020 in Journal of the Brazilian Society of Mechanical Sciences and Engineering