Velmurugan G

Mr. Velmurugan G

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 June 2023 in Journal of Natural Fibers
Verified
Journal Article
Open access
VGVelmurugan G
Velmurugan G
PKP. Karunakaran
P. Karunakaran
PSP.S. Sampath
P.S. Sampath
RVR. Varahamoorthi
R. Varahamoorthi

27 November 2024 in International Polymer Processing
Verified
Journal Article
Closed access
VGVelmurugan G
Velmurugan G
KPKarunakaran Periyagounder
Karunakaran Periyagounder
KSKarthik Shanmugam
Karthik Shanmugam
PSPrashanth Shanmugam
Prashanth Shanmugam
Materials development is essential for all industries to meet the current demands Limestone powder (LS), coconut shell fiber (CSF) and sugarcane bagasse fiber (SBF) were impregnated in a laminated glass fiber polymer matrix. The fiber to matrix ratio is 50 %, while SBF and CSF start replacing natural fibers at a rate of 5–15 %, and LS is always 5 %. The proposed fiber-reinforced composites were manufactured by compression molding (CMM) and the test samples were cut according to the ASTM for tensile, impact, moisture, scanning electron microscopy (SEM), X-ray diffraction (XRD) and thermogravimetric (TGA) tests. The results showed that the strength of the materials is influenced by the impregnation of the fibers into the matrix phase. Impregnation of natural fibers in glass fiber composite structures at 10–15 % loading demonstrated a weight saving of 7–8 %, tensile strength ranging from 330 to 350 MPa, maximum moisture absorption of 3.4 g, and thermal stability around 300 °C. Addition of limestone powder resulted in improved bonding ability, better surface finish, and reduced porosity, as demonstrated by SEM analysis.

22 June 2026 in Archives of Metallurgy and Materials
Verified
Journal Article
Open access
PDF file
SNSreenivasaraja Nagarajan
Sreenivasaraja Nagarajan
KMKathiresan Marimuthu
Kathiresan Marimuthu
KSKARTHIK S
KARTHIK S
VGVelmurugan G
Velmurugan G
In this study the mechanical, wear, and electrical discharge machining (EDM) performance of biodegradable WE43 magnesium alloy was enhanced by adding ceramic reinforcement like silicon carbide, aluminium oxide, and boron carbide. Two hybrid composite specimens were fabricated in this investigation with WE43 MMC 1 is reinforced with 6 wt.% reinforcement (2% SiC, 2% Al2O3, and 2% B₄C) and WE43 MMC 2 with 10 wt.% reinforcement (3.5% SiC, 3.5% Al2O3, and 3% B4C). The weight % of ceramic reinforcement content is increased, the yield strength is enhanced from 158.69 MPa to 211.47 MPa, ultimate tensile strength is improved from 241.25 MPa to 285.36 MPa, and hardness from 65.8 to 89.4. However, there was a drop-in ductility, with elongation falling from 6.52% to 3.25%, showing that there is a trade-off between strength and plasticity. The hard-ceramic content made the material more resistant to wear and are expected to make EDM easier by reducing electrode wear and improving surface quality because they are more thermally stable. SEM and EDS analysis are carried out in this study to evaluate the microstructural and surface topography of WE43 MMC. The result of this study demonstrates that the WE43 MMC 2 are promising candidates for high-performance applications in biomedical and aerospace sectors requiring lightweight materials with superior mechanical and EDM-compatible properties.

18 December 2025 in Materials Research Express
Verified
Journal Article
Open access
VGVelmurugan G
Velmurugan G
KMKathiresan M
Kathiresan M
SMSanjay Muralidharan
Sanjay Muralidharan
KSKARTHIK S
KARTHIK S
The superior mechanical and physical properties of aluminum metal matrix composites over the underlying Al alloy make them popular in a wide range of applications. The LM6, LM25, and LM4 alloys are reinforced with ceramic particles made of silicon carbide (SiC) 2% to 4%, magnesium nitride (Mg₃N₂) 2% to 4%, and gallium nitride (GaN) 0.5% to 1%, despite their extreme strength and durability. The die casting process was used to create a hybrid aluminum metal matrix composite. The mechanical behavior of the created metal matrix composite (MMC) was assessed using wear and tensile tests. A material's bonding ability, reinforcement pullout, and microcracks were discovered by SEM image analysis; its chemical composition was determined by XRD; and its thermal stability was assessed by TGA. A highest tensile strength of 258 N/mm2 was attained with the sample (LM25-3) that had 2% silicon carbide, 4% magnesium nitride, and 1% gallium nitride reinforcement. The sample (LM25-3) exhibits a minimum wear loss of 0.0011 mg/m at 1100 rpm with a load of 5 kg. A temperature before 400°C, the thermal residual mass vary from 97.7% to 91.3%, while 54% to 32% was consistently found above 800°C in all samples.