Disassembly is a core procedure in remanufacturing. Disassembly is currently carried out mainly by human operators. It is important to reduce the labor content of disassembly through automation, to make remanufacturing more economically attractive. Threaded fastener removal is one of the most difficult disassembly tasks to be fully automated. This article presents a new method developed for automating the unfastening of screws. An electric nutrunner spindle with a geared offset adapter was fitted to the end of a collaborative robot. The position of a hexagonal headed screw in a fitted stage was known only approximately, and its orientation in the hole was unknown. The robot was programed to perform a spiral search motion to engage the tool onto the screw. A control strategy combining torque and position monitoring with active compliance was implemented. An existing robot cell was modified and utilized to demonstrate the concept and to assess the feasibility of the solution using a turbocharger as a disassembly case study. Note to Practitioners-Remanufacturing is known to generate substantial economic, social, and environmental benefits. Disassembly is the first operation in a remanufacturing process chain. Unfastening threaded parts (“unscrewing”) is a common disassembly task accounting for approximately 40% of all disassembly activity. Like other disassembly tasks, often, unscrewing has to be carried out manually in remanufacturing due to difficulties caused by the variable and unpredictable condition of the end-of-life (EoL) products to be remanufactured. Automating unscrewing operations should reduce the labor content of disassembly, thus lowering remanufacturing costs and promoting the adoption of remanufacturing. This article proposes the use of a collaborative robot to perform autonomous unfastening of hexagonal headed screws. Collaborative robots have built-in force sensors and can be programed to carry out operations involving not only position but also active force and compliance control. They can work safely alongside human operators, enabling the latter to focus on jobs requiring high cognitive or manipulation abilities. The article presents a novel spiral search technique developed to improve the rate of successful engagement between the robot end effector and the screw heads despite uncertainties in the location of the screws. The technique was successfully demonstrated on the dismantling of a turbocharger but can readily be applied to other EoL products with hexagonal headed screws. It can also be used with other kinds of screws (e.g., Phillips screws and slotted-head screws) simply by changing the tool and tuning the robot control parameters. A limitation of the proposed technique is that it can only deal reliably with undamaged screws. In our future research, we will consider screws that are in imperfect conditions through usage and develop appropriate solutions for their removal by robots.
When considered in two-dimensional space, a cylindrical peg being withdrawn from a clearance-fit hole can exhibit one of four contact states: no contact, one-point contact, two-point contact and line contact. Jamming and wedging can occur during the two-point contact. Effective control of the two-point contact region can significantly reduce resistance in peg–hole disassembly. In this paper, we explore generic peg–hole disassembly processes with compliance and identify the effects of key parameters including the degree of compliance, the location of the compliance centre and initial position errors. A quasi-static analysis of peg–hole disassembly has been performed to obtain the boundary conditions of the two-point contact region. The effects of key variables on the two-point contact region have been simulated. Finally, peg–hole disassemblies with different locations of compliance centre achieved using active compliance have been experimentally investigated. The proposed theoretical model can be implemented to predict the range and position of the two-point contact region from the perspective of peg–hole disassembly.
Efficient processing of end-of-life lithium-ion batteries in electric vehicles is an important and pressing challenge in a circular economy. Regardless of whether the processing strategy is recycling, repurposing, or remanufacturing, the first processing step will usually involve disassembly. As battery disassembly is a dangerous task, efforts have been made to robotise it. In this paper, a robotic disassembly platform using four industrial robots is proposed to automate the non-destructive disassembly of a plug-in hybrid electric vehicle battery pack into modules. This work was conducted as a case study to demonstrate the concept of the autonomous disassembly of an electric vehicle battery pack. A two-step object localisation method based on visual information is used to overcome positional uncertainties from different sources and is validated by experiments. Also, the unscrewing system is highlighted, and its functions, such as handling untightened fasteners, loosening jammed screws, and changing the nutrunner adapters with square drives, are detailed. Furthermore, the time required for each operation is compared with that taken by human operators. Finally, the limitations of the platform are reported, and future research directions are suggested.
6 February 2023 in IEEE Transactions on Industrial Informatics
This paper proposes a platform for robots to learn disassembly tasks based on reinforcement learning (RL) techniques. The platform is demonstrated by a robot learning the skill of removing a bolt along a door-chain groove in a data-driven way, where the clearance between the bolt and the groove is less than 1mm. Furthermore, the relationship between the performance of the learned skills and the precision of the robot is studied with a method to control the robot's precision by adding uncorrelated zero-mean Gaussian noise to the robot's actions. Finally, the transferability of the learned skills among robots with different precisions is empirically studied. It has been found that skills learned by a low-precision robot can perform better on a robot with higher precision, and skills learned by a high-precision robot have worse performance on robots with lower precision.
15 November 2024 in Computers & Industrial Engineering
Disassembly is a crucial step in remanufacturing and is currently mainly performed by humans. Automating disassembly can reduce labour costs and make remanufacturing more economically attractive. This paper focuses on identifying and characterizing a common disassembly task, dual peg-hole disassembly, with the aim of building a robotic disassembly system for this task. We enumerate the possible contact states and their geometric conditions during the extraction of two studs in a dual peg-hole. This paper focuses on jamming in the extraction and conducts geometrical and quasi-static analyses to determine the boundary conditions of jamming. Based on the analyses, this paper also investigates the role of active compliance as a solution to avoid jamming. We also simulate critical variables and examine key parameters such as the degree of compliance, the location of the compliance centre and initial position errors. Finally, we conduct experimental studies on dual peg-hole extraction with different compliance centres obtained using active compliance.