Lin Yang

Dr. Lin Yang


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 July 2025 in Science Advances
Verified
Journal Article
Open access
SGShuai Guo
Shuai Guo
SPShubham Patel
Shubham Patel
JWJunhui Wang
Junhui Wang
ZYZhen Yu
Zhen Yu
HQHao Qu
Hao Qu
STSwee Ching Tan
Swee Ching Tan
The rapid proliferation of flexible electronics necessitates the development of self-powered energy harvesting systems with continuous power output and sensing signal monitoring. In this study, inspired by transient voltage output (0.2 volts, 4 days) is proposed by replacing movable water droplets with “confined” moisture, harvested and locked by a hygroscopic polymeric gel with high sorption capacity and rapid sorption-desorption kinetics. Further analysis reveals the capacitive behavior of SEHSI, leading to excellent tactile sensing capabilities with high sensitivity and rapid responsiveness, and humidity and temperature response with robust cyclic stability for over 10,000 cycles. Such all-in-one powering and sensing platforms demonstrate promising application potential in self-powered human-machine interactions, including breath status monitoring, contactless motion detection, and braille detection. Our design establishes a promising approach to developing self-powered energy harvesting and sensing systems for human-machine interfaces.

12 December 2019 in Materials Horizons
Verified
Journal Article
Closed access
PDF file
DZDanwei Zhang
Danwei Zhang
WJWin Jonhson
Win Jonhson
THTun Seng Herng
Tun Seng Herng
YAYong Quan Ang
Yong Quan Ang
LYLin Yang
Lin Yang
JDJun Ding
Jun Ding
Ceramics and metals are important materials that modern technologies are constructed from. The capability to produce such materials in a complex geometry with good mechanical properties can revolutionize the way we engineer our devices. Current curing techniques pose challenges such as high energy requirements, limitations of materials with high refractive index, tedious post-processing heat treatment processes, uneven drying shrinkages, and brittleness of green bodies. In this paper, a novel modified self-curable epoxide–amine 3D printing system is proposed to print a wide range of ceramics (metal oxides, nitrides, and carbides) and metals without the need for an external curing source. Through this technique, complex multi-material structures (with metal–ceramic and ceramic–ceramic combinations) can also be realized. Tailoring and matching the sintering temperatures of different materials through sintering additives and dopants, combined with a structural design providing maximum adhesion between interfaces, allow us to successfully obtain superior quality sintered multi-material structures. High-quality ceramic and metallic materials have been achieved (e.g., zirconia with >98% theoretical density). Also, highly conductive metals and magnetic ceramics were printed and shaped uniquely without the need for a sacrificial support. With the addition of low molecular weight plasticizers and a multi-stage heat treatment process, crack-free and dense high-quality integrated multi-material structures fabricated by 3D printing can thus be a reality in the near future.

19 November 2019 in Nanoscale
Verified
Journal Article
Closed access
PDF file
YYYibin Yang
Yibin Yang
YOYingqing Ou
Yingqing Ou
YYYang Yang
Yang Yang
XWXijun Wei
Xijun Wei
DGDi Gao
Di Gao
YZYunhuai Zhang
Yunhuai Zhang
The development of efficient and stable non-noble-metal electrocatalytic materials for the oxygen evolution reaction (OER) is a huge and important challenge at present. Herein, we report the prominent enhancement of OER activity via doping vanadium into CoFe-based layered double hydroxide (LDH) electrocatalysts. Electrochemical characterization shows that the Co2Fe0.5V0.5 LDH grown on carbon papers (CPs) has an enormous electrochemical surface area (ECSA) and exhibits the smallest overpotential of 242 mV at 10 mA cm−2, which only requires a small Tafel slope of 41.4 mV dec−1 in 1 M KOH solution. The X-ray photoelectron spectroscopy (XPS) peak position of Co, Fe and O moves slightly to higher binding energy, elucidating the improved covalency of the metal–oxygen bond after V doping. DFT+U simulation indicates that the outstanding electrocatalytic activity of Co2Fe0.5V0.5 could be ascribed to the increased metal–oxygen covalency in LDH after V element doping, and facilitates the charge-transfer from oxygen to the metal. This finely tuned strategy by V doping into the CoFe-based LDH matrix can adjust the covalency of metal–oxygen bridges and enhance its electrocatalytic activity for the OER. In this work, we also present a general method to study various highly efficient metal hydroxide catalysts for the OER.

1 February 2020 in Nano Energy
Verified
Journal Article
Closed access
DNDilip Krishna Nandakumar
Dilip Krishna Nandakumar
JVJayraj V. Vaghasiya
Jayraj V. Vaghasiya
LYLin Yang
Lin Yang
YZYaoxin Zhang
Yaoxin Zhang
STSwee Ching Tan
Swee Ching Tan

24 February 2020 in Journal of Materials Chemistry A
Verified
Journal Article
Closed access
PDF file
YXYuli Xiong
Yuli Xiong
LYLin Yang
Lin Yang
DNDilip Krishna Nandakumar
Dilip Krishna Nandakumar
YYYibin Yang
Yibin Yang
HDHongmei Dong
Hongmei Dong
STSwee Ching Tan
Swee Ching Tan
The interfacial interaction in the In 2 S 3 @Bi 2 S 3 vdW heterostructure is beneficial for transferring photogenerated holes to the surface with efficient water oxidation.

6 March 2026 in Nature Water
Verified
Journal Article
Closed access
FCFeng Cheng
Feng Cheng
Hongbin LiHongbin Li
Hongbin Li
ZWZechang Wei
Zechang Wei
MZMengjuan Zhou
Mengjuan Zhou
HLHaojie Lu
Haojie Lu
STSwee Ching Tan
Swee Ching Tan