13 January 2019 in Advanced Materials
26 August 2020 in Energy & Environmental Science
Water and energy are intimately intertwined, and it is high time to put forth integrated approaches to address the challenges and opportunities of the water–energy nexus. Herein, a novel fluidic photothermal structure integrated with a brine-drenching induced electricity generator is reported for simultaneous clean water and power production. The fluidic photothermal structure is capable of sustaining solar-thermal distillation systems (e.g. interfacial and multi-stage configurations) at high energy conversion efficiency while completely preventing salt formation from occurring in the long-term desalination process, by taking advantage of unidirectional brine fluid transportation. The brine-drenching induced electricity allows immediate power generation with a piece of wet fabric only. Furthermore, the fabric-based energy generator exhibits remarkable programmable properties, and we have also demonstrated that power generation is also achievable with different water sources such as human sweat, groundwater and rainwater, which opens up exciting applications in various fields of energy harvesting and water detection systems, and provides a promising solution for sustainable powering of wearable devices and electronics.
2 March 2018 in Science Advances
Work function is a crucial metric in every optoelectronic device to ensure a specific charge transport scheme. However, the number of stable conductive materials available in a given work function range is scant, necessitating work function modulation. As opposed to all the previous chemical methods of work function modulation, we introduce here an alternative approach involving optical modulation. The work function is the minimum energy needed to eject an electron from a solid into vacuum and is known to be light-intensity–independent. A “light intensity dependent” change in work function was observed in metallic thin films coated on a semiconductor. This new phenomenon, contrasting the existing notions on work function, was tested and affirmed with three different systems, namely, Au/n-Si, Pt/n-Si, and W/n-Si. A work function shift of 0.22 eV is achieved in the Pt/n-Si system merely by tuning the illumination intensity from 0 to 18 mW/cm2. Continuous tuning of work functions to a specified range is now possible just by tuning the light intensity with a few discrete metals in hand. Moreover, selective illumination creates a work function contrast on the metal film, enabling in-plane charge transport. This throws new light on the design and understanding of the optoelectronic devices. In light of this, we also present a simple photodetector design that is sensitive to illumination direction.
24 February 2020 in Journal of Materials Chemistry A
The interfacial interaction in the In 2 S 3 @Bi 2 S 3 vdW heterostructure is beneficial for transferring photogenerated holes to the surface with efficient water oxidation.
15 April 2020 in Energy & Environmental Science
Shadows are everywhere. Not much engineering use has been found for shadows, and this ubiquitous effect is strenuously avoided in optoelectronic applications. In this work, we present a shadow-effect energy generator (SEG) that scavenges the illumination contrast that arises on the device from shadow castings, and generates a direct current, simply by placing a part of the generator in shadow. The shadow-effect mechanism is experimentally validated by Kelvin Probe Force Microscopy (KPFM). The SEG is capable of harvesting energy from illumination contrasts arising under weak ambient light. Without any optimization, our generator has a power density of 0.14 μW cm−2 under indoor conditions 0.001 sun, where shadows are persistent. Our SEG performs 200% better than that of commercial silicon solar cells under the effects of shadows. The harvested energy from our generator in the presence of shadows arising at a very low intensity (0.0025 sun) can drive an electronic watch (1.2 V). In addition, the SEG can serve as a self-powered sensor for monitoring moving objects by tracking the movement of shadows. With its cost-efficiency, simplicity and stability, our SEG offers a promising architecture to generate green energy from ambient conditions to power electronics, and as a part of a smart sensor systems, especially in buildings.
8 December 2017 in Journal of Materials Chemistry A
Photoelectrochemical solar cells have gained impetus over the past two decades owing to several advantages over conventional Si solar cells. The redox capabilities of the electrolyte play a major role in determining the overall photo-conversion efficiency (PCE) of dye sensitized solar cells. In this work we report a novel low toxicity and environmentally friendly aqueous organic ionic conductor (AOIC) for high efficiency DSSCs. This study presents the effect of water on the photocurrent density (Jsc) and stability of DSSCs. Interestingly we have also found that the addition of water to the OICs strongly alters the flat band potential (Efb) of nano-crystalline TiO2, hinders the recombination at the TiO2–AOIC interface and positively shifts the redox potential of I−/I3 −. Under 1 sun illumination, OICs with 3-methoxypropionitrile solvent and OICs in water show a PCE of 6.02% and 3.57% respectively. This reduced PCE and J–V characteristics are attributed to the negative influence of water on the electron lifetime, electron recombination kinetics and the dark current. Substituting the electron withdrawing group present in the para-position of pyridinium salts mitigates the toxicity and enhances the cationic effect in the electrolyte. The DSSCs fabricated using AOICs showed excellent stability for more than 20 days.