Laser remote sensing of earthquake waves has the potential to be used in many applications. This article shows a Doppler model for laser remote sensing of seismic waves based on a wavefront sensor. The longitudinal vibration wave is analyzed using remote sensing, guided by theoretical principles. To determine the magnitude of ground vibration, we employ the method of wavefront phase change analysis, utilizing a continuous laser emitting light with a wavelength of 635 nm to illuminate the ground target. The ground vibration amplitude within the range of 0.12–1.18 mm was examined, confirming the reasonableness of the Doppler model. Simultaneously, the experimental findings indicate that the system exhibits a certain enhancement in detection accuracy compared to the conventional laser remote sensing detection technique. This approach can detect vibration signals at a sub-millimeter scale level, with an accuracy of 1% to 2%. The approach can fulfill the requirements for detecting seismic waves with low frequencies.
In geophysical exploration, laser remote sensing detection of seismic waves based on wavefront sensors can be used for geological detection and geophysical exploration. However, due to the high sensitivity of the wavefront sensor, it is easy to be affected by the environmental light and vibration, resulting in random noise, which is difficult to predict, thus significantly reducing the quality of the vibration signal and the detection accuracy. In this paper, a large amount of data is collected through a single-point vibration detection experiment, and the relationship between amplitude and spot centroid offset is analyzed and calculated. The real noisy vibration signal is denoised and signal enhanced by using a BiLSTM denoising convolutional self-encoder (BiL-DCAE). The irregular and unpredictable noise generated by various complex noise mixing is successfully suppressed, and its impact on the vibration signal is reduced. The signal-to-noise ratio of the signal is increased by 13.90 dB on average, and the noise power is reduced by 95.93%, which greatly improves the detection accuracy.
Seismic wave laser remote sensing is extensively employed in seismic monitoring and resource exploitation. This work establishes a vibration signal point scanning detection system utilizing wavefront sensors, leveraging their high resolution, array detection capabilities, and the independent detection of each microlens based on research into seismic wave laser remote sensing detection. The experiments validate that each microlens of the wavefront sensor possesses autonomous detecting capabilities, enabling the sensor to scan and identify points of vibrational signals. This work also significantly improved the scanning efficiency by increasing the diameter of the scanning spot.
Laser remote sensing of seismic waves is extensively utilized in earthquake monitoring and resource exploitation. This article leverages wavefront sensors’ high resolution and array detection capabilities to effectively conduct planar scanning of target areas in seismic wave laser remote sensing research, thereby properly acquiring regional vibration data. The error margin is between and relative to the source information.
Laser remote sensing based on wavefront sensors shows great potential for detecting minute vibrations. However, due to their high detection sensitivity, wavefront sensors are highly susceptible to interference from environmental noise and instrument-induced noise, which significantly compromises the quality of the acquired vibration signals and the accuracy of the detection. In this study, over 60,000 vibration signal data samples were collected under various amplitude and frequency conditions using a laser remote sensing seismic wave detection system. By applying a physics-aware dual-channel decoupled network (PRISM) to perform noise reduction on the vibration signals, we achieved improvements in signal quality under multiple real-world noise environments. The average signal-to-noise ratio improved by 12.16 dB, and the signal distortion ratio improved by 6.35 dB, successfully preserving faint vibration signals within the noise.
Unmanned Aerial Vehicle (UAV)-borne laser wavefront sensing technology holds significant application prospects for high-precision vibration detection in the field; however, the acquired signals are highly susceptible to complex, nonlinear environmental noise interference. Existing high-precision deep learning denoising models typically rely on massive computational resources, making them difficult to deploy on resource-constrained edge devices. Consequently, practical engineering exploration is often confined to an inefficient “blind sampling followed by offline processing” mode, incurring a high risk of data invalidation. To explore solutions for real-time quality control at the edge, this paper proposes a lightweight time-frequency state space model (SWIFT-Mamba), aiming to provide an efficient algorithmic foundation and an engineering proof-of-concept for portable devices moving toward in situ verification. Through rigorous evaluation on over 60,000 laboratory-measured and controlled synthetic wavefront vibration data samples, SWIFT-Mamba achieves an average Signal-to-Noise Ratio (SNR) gain of 19.64 dB and a Scale-Invariant Signal-to-Distortion Ratio (SI-SDR) gain of 16.10 dB, with an extremely low computational overhead requiring only 0.066 M parameters and 0.147 GFLOPs. Experimental results demonstrate that while significantly reducing computational costs, the proposed model can effectively extract the physical manifold of the signal and precisely preserve high-frequency phase features.