Samir A Hamad

Dr. Samir A Hamad

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 July 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
WXWei Xu
Wei Xu
HXHan Xiao
Han Xiao
JGJian Ge
Jian Ge
YTYirong Tang
Yirong Tang
YLYaohua Li
Yaohua Li
SHSamir A Hamad
Samir A Hamad
With the advantage of fast dynamic response, the model predictive current control (MPCC) strategy has been frequently adapted to linear induction machine. Unfortunately, conventional MPCC methods have high current harmonics, significant thrust ripple, and are sensitive to magnetizing inductance parameter. Thereof, a discrete space vector modulation (DSVM)-based MPCC (DSVM-MPCC) with magnetizing inductance identification for thrust ripple suppression is proposed. First, a DSVM-MPCC is proposed to suppress thrust ripple by increasing the available voltage vectors (VVs) through the VV plane division method. Then, the VV searching method is designed to reduce candidate VVs and computational burden. Second, one improved magnetizing inductance identification method based on a back electromotive force observer with dc-offset suppression is built up to enhance the parametric robustness of DSVM-MPCC. Finally, the proposed method is verified by comprehensive simulation and experiment on a 3 kW prototype.

12 July 2022 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
WXWei Xu
Wei Xu
SHSamir A Hamad
Samir A Hamad
SBSyed Arslan Bukhari
Syed Arslan Bukhari
Mahmoud F. ElmorshedyMahmoud F. Elmorshedy
Mahmoud F. Elmorshedy
MAMosaad Mohiedden Ali
Mosaad Mohiedden Ali
AHMED DIABAHMED DIAB
AHMED DIAB
In this article, two kinds of finite control set-model predictive voltage control (FCS-MPVC) methods have been proposed for linear induction machine to eliminate the cumbersome selection of the weighting factor (WF), achieve lower ripples of both thrust and flux, and reduce the heavy calculation steps. The first method, FCS-MPVC I, uses one voltage vector (VV) during the whole control period, and the second method, FCS-MPVC II, uses two VVs. Moreover, the proposed methods use a single cost function without any WF. This function consists of the errors between primary voltage references with their predicted values in the αβ -axis. Depending on the distance between the reference VV (RVV), as calculated using the deadbeat control method, and all candidate VVs (CVVs), the first proposed method, FCS-MPVC I, can select the nearest VV to the RVV as the optimal VV (OVV), which can reduce the redundant evaluation work greatly. Meanwhile, the second proposed method, FCS-MPVC II, applies two VVs, active VV and null VV, to adjust the duty ratio effectively. To avoid the iterated evaluation for all CVVs, one simplified search order excluding unsuitable CVVs has been proposed to determine the optimal OVV, which selects only one active VV from the two adjacent active VVs in the sector owning the RVV. Afterward, based on a prototype of 3-kW arc induction machine with a large radius, extensive simulation and experiments have fully demonstrated that the proposed methods can get much lower thrust ripples and less calculation steps effectively, compared with those of conventional finite control set-model predictive thrust control strategy.

8 July 2024 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
SHSamir A Hamad
Samir A Hamad
WXWei Xu
Wei Xu
Abdul khalique JunejoAbdul khalique Junejo
Abdul khalique Junejo
HXHan Xiao
Han Xiao
KLKaiju Liao
Kaiju Liao
MGMohamed A. Ghalib
Mohamed A. Ghalib
This article proposes a full order sliding mode control (FOSMC) based finite set-model predictive flux control (FS-MPFC) to enhance the dynamic response in the whole speed range of the linear induction machine (LIM). Firstly, the FS-MPFC method is designed to reduce the associated limitations of the traditional finite set-model predictive based on thrust control (FS-MPTC) method in terms of the complex tuning problem of weighting factor and many steps of the calculation process. Secondly, the FOSMC for the speed loop is developed using the FS-MPFC method to achieve faster transient response and high tracking ability with lower thrust and flux ripples. The FOSMC-MPFC method is then thoroughly studied, encompassing its basic design methodology, implementation steps, and stability validity. Finally, entire simulations and experimental analyses at different speeds and loads have been conducted on a 3 kW prototype arc induction machine to validate the superiority and feasibility of the proposed FOSMC-MPFC method.

27 October 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
SHSamir A Hamad
Samir A Hamad
FEFayez F. M. El-Sousy
Fayez F. M. El-Sousy
MIMoustafa Magdi Ismail
Moustafa Magdi Ismail
MEMahmoud F. Elmorshedy
Mahmoud F. Elmorshedy
DADhafer Almakhles
Dhafer Almakhles
MGMohamed. A. Ghalib
Mohamed. A. Ghalib
To improve the dynamic response of the linear induction machine (LIM) over its complete speed range, this paper introduces a finite state-model predictive voltage control (FS-MPVC) based on terminal sliding mode control (TSMC). First, the TSMC for the speed loop is designed to attain high tracking capability and faster transient response. Second, in terms of the intricate balancing coefficient tuning difficulty and several computation steps of the conventional finite state-model predictive thrust control method, the control objectives are transformed to the primary voltage based on the FS-MPVC method. Furthermore, the TSMC-MPVC is fully studied in detail, covering its design and implementation steps. Ultimately, a 3 kW LIM has undergone comprehensive simulation evaluations by the presented TSMC-MPVC through comparing with the conventional methods at various speeds and loads to verify the effectiveness and viability of the proposed method.

Verified
Journal Article
Open access
PDF file
MGMohamed A. Ghalib
Mohamed A. Ghalib
SHSamir A Hamad
Samir A Hamad
Mahmoud F. ElmorshedyMahmoud F. Elmorshedy
Mahmoud F. Elmorshedy
DADhafer Almakhles
Dhafer Almakhles
HAHazem Ali
Hazem Ali
There is an increasing interest in achieving global climate change mitigation targets that target environmental protection. Therefore, electric vehicles (as linear metros) were developed to avoid greenhouse gas emissions, which negatively impact the climate. Hence, this paper proposes a finite set-model predictive-based current control (FS-MPCC) strategy of linear induction motor (LIM) for linear metro drives fed by solar cells with a beta maximum power extraction (B-MPE) control approach to achieve lower thrust ripples and eliminate a selection of weighting factors, the main limitation of conventional model predictive-based thrust control (which can be time consuming and challenging). The B-MPE control approach ensures that the solar cells operate at their maximum power output, maximizing the energy harvested from the sun. Considering a single cost function of primary current errors between the predicted values and their references in αβ-axes, the proposed method eliminates the need for weighting factor selection, thus simplifying the control process. A comparison between the conventional and the presented control method is conducted using MATLAB/Simulink under different scenarios. Comprehensive simulation results of the presented system on a 3 kW LIM prototype revealed that the introduced system based on FS-MPCC surpasses the conventional technique, resulting in a maximum power extraction from solar cells and a suppression of the thrust ripples as well as an avoidance of weighting factor tuning, leading to fewer computational steps.

1 January 2024 in Journal of Advanced Engineering Trends
Verified
Journal Article
Open access
PDF file
SHSamir A Hamad
Samir A Hamad
RMRamadan M. Mostafa
Ramadan M. Mostafa
JTJean Thomas
Jean Thomas
ESEmad G Shehata
Emad G Shehata
ADAhmed Abdelhamid Zaki Diab
Ahmed Abdelhamid Zaki Diab
There is an increasing interest in achieving global goals of mitigating climate changes that target ‎environment protection. Thus, electric vehicles (as linear metros) were elaborated to avoid greenhouse ‎gas emissions which negatively impact climate. Hence, in this paper, a finite control set-model ‎predictive current control (FCS-MPCC) method of linear induction machine (LIM) was proposed for ‎linear metro drives to achieve lower thrust ripples and eliminate the selection of weighting factor (WF), ‎the main limitation of conventional finite control set-model predictive thrust control (FCS-MPTC). ‎Also, a model reference adaptive system (MRAS) was used for speed estimation due to some ‎environmental considerations and cost-effectiveness. The proposed method used a single cost function ‎that avoided the existence of WF and consisted of primary current errors between the predicted values ‎and their references in αβ-axes. A comparison between the FCS-MPTC and the suggested control ‎method was conducted using Matlab/Simulink under a wide range of operating circumstances and via ‎uncertainty validations issues, on the basis of one 3 kW arc induction machine (which constructed to ‎imitate the actual behavior of the LIM). The extensive simulation results revealed that the proposed ‎FCS-MPCC method can lead to much lower thrust ripples without heavy calculation steps. Moreover, ‎the speed error between the estimated and actual speeds is about 0.025% of the reference value which ‎validates the speed estimation scheme.‎