Microlens array (MLA) has been widely applied in augmented reality and optical imaging. When used in a humid environment or medical endoscopy, MLA needs to be both superhydrophobic and multifocal. However, it is not easy to achieve both superhydrophobic and multifocal function by integrating superhydrophobic and multifocal structures on the same surface by means of a simple, efficient, and precise method. In this paper, the superhydrophobic multifocal MLA with superhydrophobic properties and multifocal functions is successfully designed for preparation based on a method of 3D lithography and soft lithography. The 3D lithography can further help the preparation of a multifocal MLA with varying apertures and a multistep superhydrophobic structure with a round dome. The superhydrophobic multifocal MLA with periods 50 and 120 mu m has perfect superhydrophobic property. The water droplet can slide and bounce off the surface at a roll angle of less than 12.9(degrees) with both multifocal and integrated imaging function, as well as up to 397 mu m depth-of-field (DOF) detection range; this greatly exceeds the conventional MLA. The perfect superhydrophobic and optical property can be achieved in an extremely humid environment. The superhydrophobic multifocal MLA proposed in this paper has a promising prospect for actual practices.
The conventional reflective optical surface with adjustable reflection characteristics requires a complex external power source. The complicated structure and preparation process of the power system leads to the limited modulation of the reflective properties and difficulty of use in large-scale applications. Inspired by the biological compound eye, different microstructures are utilized to modulate the optical performance. Convex aspheric micromirror arrays (MMAs) can increase the luminance gain while expanding the field of view, with a luminance gain wide angle > 90° and a field-of-view wide angle close to 180°, which has the reflective characteristics of a large gain wide angle and a large field-of-view wide angle. Concave aspheric micromirror arrays can increase the luminance gain by a relatively large amount of up to 2.66, which has the reflective characteristics of high gain. Industrial-level production and practical applications in the projection display segment were carried out. The results confirmed that convex MMAs are able to realize luminance gain over a wide spectrum and a wide range of angles, and concave MMAs are able to substantially enhance luminance gain, which may provide new opportunities in developing advanced reflective optical surfaces.