Chengqun Gui

Chengqun Gui


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 November 2022 in ACS Applied Materials & Interfaces
Verified
Journal Article
Open access
SLShiyi Luan
Shiyi Luan
PXPeng Xu
Peng Xu
YZYurong Zhang
Yurong Zhang
Longjian XueLongjian Xue
Longjian Xue
YSYi Song
Yi Song
CGChengqun Gui
Chengqun Gui
A microlens array (MLA) is an essential optical imaging device in the applications of augmented and virtual realities. The imaging of MLA would become blurry in a humid outdoor atmosphere. While the incorporation of superhydrophobicity to MLA would prevent the adhesion of droplets, the complex structure and the multiple fabrication process reduce the capability of optical imaging of MLA. Herein, a flexible superhydrophobic MLA with good optical imaging capability is successfully fabricated by the combination of 3D direct laser writing (DLW) and soft lithography. 3D DLW allows the fabrication of MLA with a hierarchical pillar array (h-MLA) in one step, which ensures good optical properties of the resulting polydimethylsiloxane (PDMS) h-MLA. The resulting h-MLAs with pitches ranging between 50 and 100 mu m are superhydrophobic from which water droplets slide away at a sliding angle smaller than 15.6 degrees and bounce off from the surface. Meanwhile, the hierarchical pillar array has a limited impact on the imaging capability and the field of view of h-MLA. With an optimized pitch of 60 mu m, h-MLA has a transparency as good as MLA. Moreover, PDMS h-MLA retains excellent optical and superhydrophobic properties when bent and in an extremely humid environment. We believe that the proposed h-MLA could find applications in outdoor environments.

26 July 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
XLXiaoyu Li
Xiaoyu Li
SYShengtao Yu
Shengtao Yu
CGChengqun Gui
Chengqun Gui
The edge coupler is an indispensable optical device for connecting an external fiber and on-chip waveguide. The coupling efficiency of the edge coupler affects the effective integration of optical circuits. In this study, three-dimensional (3D) edge couplers with high efficiency and tolerance are proposed. The high coupling efficiency of the 3D edge couplers is verified by theoretical calculations. Three couplers are fabricated on a thick-silicon platform via 3D grayscale lithography. At the 1550 nm band, the fiber-to-chip experimental data show that the maximum coupling efficiencies of the three edge couplers are 0.70 dB and 1.34 dB, 0.80 dB and 1.60 dB, and 1.00 dB and 1.14 dB for the TE and TM modes, respectively. At the 1550 nm band, misalignment tolerances measurement data reveal 0.8 dB/0.9 dB tolerance of ±5 μm in the horizontal direction, and 1.7 dB/1.0 dB tolerance of ±2 μm in the vertical direction for TE/TM mode. This study provides a new idea for the design of 3D edge couplers and demonstrates significant superiority in research and industrial applications.

21 September 2022 in Optics Express
Verified
Journal Article
Closed access
FPFei Peng
Fei Peng
YXYiduo Xu
Yiduo Xu
YSYi Song
Yi Song
CGChengqun Gui
Chengqun Gui
YZYan Zhao
Yan Zhao
GQGui Qun
Gui Qun
With the continuous reduction of critical dimension (CD) of integrated circuits, inverse lithography technology (ILT) is widely adopted for the resolution enhancement to ensure the fidelity of photolithography, and for the process window (PW) improvement to enlarge the depth of focus (DOF) and exposure latitude (EL). In the photolithography, DOF is a critical specification which plays a vital role for the robustness of a lithographical process. DOF has been investigated to evaluate the optimization quality of ILT, but there is not a clear scenario to optimize the DOF directly. In this paper, the source and mask optimization (SMO) based on defocus generative and adversarial method (DGASMO) is proposed, which takes the source, mask and defocus as variables, and the inverse imaging framework employs the Adam algorithm to accelerate the optimization. In the optimization process, the penalty term constantly pushes the defocus outward, while the pattern fidelity pushes the defocus term inward, and the optimal source and mask are constantly searched in the confrontation process to realize the control of DOF. Compared to SMO with the Adam method (SMO-Adam), the PW and DOF (EL = 15%) in DGASMO maximally increased 29.12% and 44.09% at 85 nm technology node, and the PW and DOF (EL = 2%) at 55 nm technology node maximally increased 190.2% and 118.42%. Simulation results confirm the superiority of the proposed DGASMO approach in DOF improvement, process robustness, and process window.

6 December 2023 in ACS Omega
Verified
Journal Article
Open access
HCHao Cao
Hao Cao
HDHongfeng Deng
Hongfeng Deng
HWHui Wan
Hui Wan
SLShiyi Luan
Shiyi Luan
SSSu Shen
Su Shen
CGChengqun Gui
Chengqun Gui
Microlens array (MLA) has been widely applied in augmented reality and optical imaging. When used in a humid environment or medical endoscopy, MLA needs to be both superhydrophobic and multifocal. However, it is not easy to achieve both superhydrophobic and multifocal function by integrating superhydrophobic and multifocal structures on the same surface by means of a simple, efficient, and precise method. In this paper, the superhydrophobic multifocal MLA with superhydrophobic properties and multifocal functions is successfully designed for preparation based on a method of 3D lithography and soft lithography. The 3D lithography can further help the preparation of a multifocal MLA with varying apertures and a multistep superhydrophobic structure with a round dome. The superhydrophobic multifocal MLA with periods 50 and 120 mu m has perfect superhydrophobic property. The water droplet can slide and bounce off the surface at a roll angle of less than 12.9(degrees) with both multifocal and integrated imaging function, as well as up to 397 mu m depth-of-field (DOF) detection range; this greatly exceeds the conventional MLA. The perfect superhydrophobic and optical property can be achieved in an extremely humid environment. The superhydrophobic multifocal MLA proposed in this paper has a promising prospect for actual practices.

9 December 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
PFPeng Fei
Peng Fei
CSChao Sun
Chao Sun
HWHui Wan
Hui Wan
CGChengqun Gui
Chengqun Gui
Based on three-dimensional optical proximity correction (3D OPC), recent advancements in 3D lithography have enabled the high-fidelity customization of 3D micro-optical elements. However, the micron-to-millimeter-scale structures represented by the Fresnel lens design bring more stringent requirements for 3D OPC, which poses significant challenges to the accuracy of models and the efficiency of algorithms. Thus, a lithographic model based on optical imaging and photochemical reaction curves is developed in this paper, and a subdomain division method with a statistics principle is proposed to improve the efficiency and accuracy of 3D OPC. Both the simulation and the experimental results show the superiority of the proposed 3D OPC method in the fabrication of Fresnel lenses. The computation memory requirements of the 3D OPC are reduced to below 1%, and the profile error of the fabricated Fresnel lens is reduced 79.98%. Applying the Fresnel lenses to an imaging system, the average peak signal to noise ratio (PSNR) of the image is increased by 18.92%, and the average contrast of the image is enhanced by 36%. We believe that the proposed 3D OPC method can be extended to the fabrication of vision-correcting ophthalmological lenses.

12 January 2023 in Optics & Laser Technology
Verified
Journal Article
Closed access
HWHui Wan
Hui Wan
HCHao Cao
Hao Cao
SLShiyi Luan
Shiyi Luan
CGChengqun Gui
Chengqun Gui