In this study, a multi-slotted antenna is designed and characterized that can be used for wearable applications by utilizing a flexible, durable silicone rubber substrate. Flexible material has become increasingly popular among researchers in recent years for the development of wearable antennas for body area networks (BAN). The flexible device should be small in size so that it can be easily worn on the human body by integrating with wearables for transmitting and receiving signals over a sufficiently long distance. Unlike conventional flexible and semi-flexible substrate, presented work utilize silicon rubber substrate owing the advantages of good thermal stability and good resistance in varying environmental conditions. The designed antenna's surface offers a compact size of 14 × 12 mm2 with a thickness of 2 mm. The resonance frequency of the designed antenna is optimized at 5.8 GHz with a peak gain of 2.46 dBi. The specific absorption rate (SAR) achieved for the proposed antenna is 1.56 W/kg for 1 g of tissue which fulfills the FCC standard. The design offers radiation efficiency of around 80 % when loaded with hand model over the operational band of 5.5 GHz-6.5 GHz. The bending characteristics of multi-slotted antenna are also analyzed, which offers stable performance as compared to antenna without any bend. Compactness as well as high radiation efficiency have been accomplished that makes the proposed antenna a strong candidate for military applications, medical applications, GPS, RFID, and fitness tracking.
18 October 2022 in Concurrency and Computation: Practice and Experience
A wideband antenna with a relatively compact size along with a multiple input and multiple output (MIMO) configuration for millimeter wave applications is proposed in this work. The antenna offers a low profile and simple structure. First of all, an antenna is designed using Rogers RT/duroid 6002 (Rogers Corporation, Chandler, AZ, USA) with a thickness of 0.79 mm, offering wideband ranges from 21 to 35 GHz. Subsequently, the unit element is converted into a four-port MIMO antenna to improve the capacity of the system, resulting in a high data rate, which is critical for 5G as well as for devices operating in the mm wave spectrum. The proposed work exhibits total dimensions of 24 × 24 mm2 and offers a peak gain of 8.5 dBi, with an efficiency of more than 80%. The MIMO performance parameters are also studied, and the antenna offers exceptional performance in terms of mutual coupling (Sij) without inserting a decoupling structure, envelop correlation coefficient (ECC), and diversity parameters. The proposed MIMO antenna offers a minimum isolation of −25 dBi and an ECC of less than 0.018. All the other MIMO parameter values lie below the acceptable range. The High Frequency Structure Simulator (HFSS) EM software (v.19) tool is used to analyze the antenna and study its performance. The simulated outcomes are verified by fabricating a prototype, where the result offers a good comparison among both results. Moreover, the contrast in terms of different performance parameters is carried out amongst recent research articles, highlighting the key contribution of the presented design. A compact size antenna with a wideband, simplified structure, and stable performance throughout the working band is achieved; thus, it is a solid contender for mm wave applications and 5G devices.