Rudolfs Janis Zabolockis

Mr. Rudolfs Janis Zabolockis

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 December 2024 in EJNMMI Radiopharmacy and Chemistry
Verified
Journal Article
Open access
PDF file
MRMaija Radzina
Maija Radzina
LSLaura Saule
Laura Saule
EMEdgars Mamis
Edgars Mamis
EPElina Pajuste
Elina Pajuste
UKUlli Köster
Ulli Köster
TSThierry Stora
Thierry Stora
In the field of medical and scientific research, radionuclides are used to investigate various physiological and pathological processes. PRISMAP - the European medical radionuclide programme was created to bring together production facilities including intense neutron sources, an isotope mass separation facility, high-power accelerators, biomedical research institutes, and hospitals to support medical research. The aim of this article is to introduce readers with the current status of innovative radionuclides in Europe. A survey was created targeting the latest trends mainly focused on the demand, the production and the distribution of non-routinely used medical radionuclides for use in research, and for pre-clinical and clinical trials. This survey has been disseminated through the PRISMAP community. 16 of 104 respondents were working in the field of radionuclide production. The data found common aspects from all producer-facility respondents: the biggest challenge for the producers is the availability of target materials, which goes hand-in-hand with their purity/enrichment grade. The results show that there are sufficient national or international distribution routes and methods established, although having reported challenges due to legislation constraints, especially for novel radionuclides. Thanks to a questionnaire distributed by the PRISMAP consortium, the current status in radionuclides production was identified. Understanding the current status of radionuclide production is essential for assessing the continent’s capabilities and addressing the burgeoning demands for cutting-edge medical radionuclides.

1 November 2021 in Physica Scripta
Verified
Journal Article
Open access
PDF file
EPElina Pajuste
Elina Pajuste
ATAnete Stine Teimane
Anete Stine Teimane
KGKizane Gunta
Kizane Gunta
LALiga Avotina
Liga Avotina
MHMihails Halitovs
Mihails Halitovs
RZRudolfs Janis Zabolockis
Rudolfs Janis Zabolockis
The ITER-Like-Wall project has been carried out at the Joint European Torus (JET) to test plasma facing materials relevant to ITER. Materials being tested include both bulk metals (Be and W) and coatings. Tritium accumulation mechanisms and release properties depend both on the wall components, their location in the vacuum vessel, conditions of exposure to plasma and to the material itself. In this study, bulk beryllium limiter tiles, plasma-facing beryllium coated Inconel components from the main chamber, bulk tungsten and tungsten coated carbon fibre composite divertor tiles were analysed. A range of methods have been developed and applied in order to obtain a comprehensive overview on tritium retention and behaviour in different materials of plasma facing components (PFCs). Tritium content and chemical state were studied by the means of chemical or electrochemical dissolution methods and thermal desorption spectroscopy. Tritium distribution in the vacuum vessel and factors affecting its accumulation have been assessed and discussed.

18 March 2024 in Pharmaceuticals
Verified
Journal Article
Open access
PDF file
EMEdgars Mamis
Edgars Mamis
CDCharlotte DUCHEMIN
Charlotte DUCHEMIN
VBValentina Berlin
Valentina Berlin
CBCyril Bernerd
Cyril Bernerd
MBMathieu Bovigny
Mathieu Bovigny
TSThierry Stora
Thierry Stora
The radionuclides 43Sc,  44g/mSc, and 47Sc can be produced cost-effectively in sufficient yield for medical research and applications by irradiating  natTi and  natV target materials with protons. Maximizing the production yield of the therapeutic 47Sc in the highest cross section energy range of 24–70 MeV results in the co-production of long-lived, high-γ-ray-energy 46Sc and 48Sc contaminants if one does not use enriched target materials. Mass separation can be used to obtain high molar activity and isotopically pure Sc radionuclides from natural target materials; however, suitable operational conditions to obtain relevant activity released from irradiated  natTi and  natV have not yet been established at CERN-MEDICIS and ISOLDE. The objective of this work was to develop target units for the production, release, and purification of Sc radionuclides by mass separation as well as to investigate target materials for the mass separation that are compatible with high-yield Sc radionuclide production in the 9–70 MeV proton energy range. In this study, the in-target production yield obtained at MEDICIS with 1.4 GeV protons is compared with the production yield that can be reached with commercially available cyclotrons. The thick-target materials were irradiated at MEDICIS and comprised of metallic  natTi,  natV metallic foils, and  natTiC pellets. The produced radionuclides were subsequently released, ionized, and extracted from various target and ion source units and mass separated. Mono-atomic Sc laser and molecule ionization with forced-electron-beam-induced arc-discharge ion sources were investigated. Sc radionuclide production in thick  natTi and  natV targets at MEDICIS is equivalent to low- to medium-energy cyclotron-irradiated targets at medically relevant yields, furthermore benefiting from the mass separation possibility. A two-step laser resonance ionization scheme was used to obtain mono-atomic Sc ion beams. Sc radionuclide release from irradiated target units most effectively could be promoted by volatile scandium fluoride formation. Thus, isotopically pure  44g/mSc, 46Sc, and 47Sc were obtained as mono-atomic and molecular ScF 2+ ion beams and collected for the first time at CERN-MEDICIS. Among all the investigated target materials,  natTiC is the most suitable target material for Sc mass separation as molecular halide beams, due to high possible operating temperatures and sustained release.

6 September 2023 in Materials
Verified
Journal Article
Open access
PDF file
LPLaura Dace Pakalniete
Laura Dace Pakalniete
EMElizabete Maskova
Elizabete Maskova
RZRudolfs Janis Zabolockis
Rudolfs Janis Zabolockis
LALiga Avotina
Liga Avotina
ESEinars Sprugis
Einars Sprugis
EPElina Pajuste
Elina Pajuste
Sulfonated poly(ether ether ketone) (SPEEK) materials are promising candidates for replacing Nafion™ in applications such as proton exchange membrane (PEM) and direct methanol fuel cells. SPEEK membranes have several advantages such as low cost, thermal and radiation stability and controllable physicochemical and mechanical properties, which depend on the degree of sulfonation (DS). Commercial PEEK was homogenously sulfonated up to a DS of 60–90% and the membranes were prepared using a solvent casting method. Part of the samples were irradiated with a 10 MeV electron beam up to a 500 kGy dose to assess the ionizing radiation-induced effects. Both non-irradiated and irradiated membranes were characterized by Fourier Transformation infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), proton nuclear magnetic resonance (1H-NMR) spectroscopy, electrochemical impedance analysis and, for the first time for non-irradiated membranes, by spectrophotometric analysis with Cr(III). The above-mentioned methods for application for DS assessment were compared. The aim of this study is to compare different methods used for the determination of the DS of SPEEK membranes before and after high-dose irradiation. It was observed that irradiated membranes presented a higher value of DS. The appearance of different new signals in 1H-NMR and FT-IR spectra of irradiated membranes indicated that the effects of radiation induced changes in the structure of SPEEK materials. The good correlation of Cr(III) absorption and SPEEK DS up to 80% indicates that the spectrophotometric method is a comparable tool for the characterization of SPEEK membranes.

16 January 2024 in Nuclear Fusion
Verified
Journal Article
Open access
RZRudolfs Janis Zabolockis
Rudolfs Janis Zabolockis
MSM. Sondars
M. Sondars
GVG. Vaivars
G. Vaivars
IRI. Reinholds
I. Reinholds
VGV. Gostilo
V. Gostilo
EPElina Pajuste
Elina Pajuste
In this study, a tritium enrichment system in the water phase has been developed based on the combination of a proton exchange membrane (PEM) electrolysis cell and a fuel cell. As the PEM, NafionTM and laboratory-synthesized sulfonated poly(ether ether ketone) membranes modified with an additional graphene layer in order to enhance the tritium separation factor were used. Both differences in the kinetics of the hydrogen evolution reaction and transport through the graphene layer of different isotopes are the driving factors expected to affect the separation of hydrogen isotopes. The separation factor was measured both during the electrolysis and fuel cell stage using different membranes. The facilitating effect of the graphene on the separation efficiency was determined during the study. The separation factor obtained by the proposed method was evidently higher than that obtained by other conventional methods.

23 May 2023 in Nuclear Materials and Energy
Verified
Journal Article
Open access
RZRudolfs Janis Zabolockis
Rudolfs Janis Zabolockis
EPElina Pajuste
Elina Pajuste
LALiga Avotina
Liga Avotina