Human–robot collaboration stands as one of the research frontiers in industrial applications due to the possibility for human operators to be supported by robots in carrying out their tasks in a shared workspace. However, advances in this field can be slowed down by the lack of standards regarding the safety and ergonomics of such applications. This article aims at reducing this gap by presenting an adaptation of the standard ISO 11228-3 for the ergonomic evaluation of hand-guiding applications through the OCRA index. This innovative methodology is innovatively applied to a drilling application in which a human operator hand-guides a collaborative robotic system consisting of a Franka Emika Panda robot, a force/torque sensor and an IMU suit to track the motion of the operator’s body. The SaRAH app, a MATLAB 2020a-based software tool developed on purpose, implements the ergonomic assessment procedure, allowing the proper redesign of the working shift (offline mode) or providing the worker suggestions to improve his/her behavior (online mode) so as to reduce the ergonomic risk.
Human–robot collaboration (HRC) remains an increasingly growing trend in the robotics research field. Despite the widespread usage of collaborative robots on the market, several safety issues still need to be addressed to develop industry-ready applications exploiting the full potential of the technology. This paper focuses on hand-guiding applications, proposing an approach based on a wearable device to reduce the risk related to operator fatigue or distraction. The methodology aims at ensuring operator’s attention during the hand guidance of a robot end effector in order to avoid injuries. This goal is achieved by detecting a region of interest (ROI) and checking that the gaze of the operator is kept within this area by means of a pair of eye-tracking glasses (Pupil Labs Neon, Berlin, Germany). The detection of the ROI is obtained primarily by the tracking camera of the glasses, acquiring the position of predefined ArUco markers, thus obtaining the corresponding contour area. In case of the misdetection of one or more markers, their position is estimated through the optical flow methodology. The performance of the proposed system is initially assessed with a motorized test bench simulating the rotation of operator’s head in a repeatable way and then in an HRC scenario used as case study. The tests show that the system can effectively identify a planar ROI in the context of a HRC application in real time.
16 August 2022 in The International Journal of Advanced Manufacturing Technology
In the last decades, compliant mechanisms have been widely studied but their application has not been widespread due to their susceptibility to fatigue and the lack of systematic design methodologies. In this paper, the authors propose a new approach to be used in the automated machinery mechanism design (the mechanisms are usually subjected to predominant inertial loads) that exploits the capability of the compliant joints to store and release elastic energy in order to reduce the motor torque requirements. Thanks to the carbon-fiber reinforced 3D printing technologies, the compliant joint stiffness can be properly designed to obtain, for the considered mechanism, a resonant condition during its nominal functioning. Moreover, topology optimization can be successfully employed to reduce the mechanism component inertia (keeping the same overall mechanism stiffness) and thus, further diminish the torque requirements. In order to assess the quality of the proposed approach, a pusher mechanism used in a real automated machine has been considered. A prototype has been manufactured to evaluate the effect of the compliant joint introduction and the topology optimization on the motor torque reduction. To validate the results, an experimental campaign has been conducted. Comparison between the standard design approach and the new one emphasizes the superior contribution of compliant joint introduction on the motor torque reduction: a 97% and 96% reduction on the RMS and peak motor torque, respectively, is achieved resorting to the new design approach. Although a high repeatability is achieved, a slight deviation of the trajectory with respect to the ideal one is however registered.