This paper revisits frequency domain analysis method for water hammer study in a hydraulic system. Detailed investigation of the effect of the flow parameters is conducted. Weaknesses on previous research works were pointed out. A brief presentation of the frequency response function determined from motions equations of transient water flow is firstly presented. A special emphasis was devoted to the effect of frictional flow on resonance pulsations. It was obtained that, unlike previous findings, resonance frequencies in a frictional flow are decayed from odd harmonics. This decay is more or less significant depending on the friction coefficient. The observations related to various effects are also illustrated through a set of test cases that were numerically analyzed. Additionally relative uncertainties highlighting the frictional flow effect on the accuracy of resonant pulsations detection are evaluated.
This study explores the development of sustainable composite materials based on phosphogypsum (PG), an abundant industrial by-product, reinforced with olive and eucalyptus wood chips. The objective is to valorize waste streams while enhancing the mechanical, thermal, and acoustic performance of the base material for eco-efficient construction applications. Composites were prepared with fiber contents of 5%, 10%, 15%, and 20% and evaluated through standardized experimental tests. Mechanical behavior was assessed via three-point bending tests, revealing a 26% improvement in flexural strength at 15% eucalyptus content. Water absorption increased with fiber content but remained lower in eucalyptus-reinforced composites due to better fiber–matrix cohesion. Thermal conductivity decreased significantly from 5% to 20% fiber content, reaching 0.60 W/m·K at 20% eucalyptus content, indicating enhanced insulation potential. Acoustic tests, performed using an impedance tube in accordance with ISO 10534-2, showed strong frequency-dependent absorption. The 20% olive composite achieved a peak absorption coefficient of 0.78 and an NRC of 0.68, demonstrating excellent sound-damping characteristics. This work introduces a novel integration of two underutilized Mediterranean biomasses into PG matrices and highlights their multifunctional benefits. The resulting composites offer a low-cost, low-carbon solution for thermally and acoustically optimized building components, advancing circular economy principles in the construction sector.
This study proposes an experimental data-driven hybrid prediction framework for hydraulic turbine performance using a Particle Swarm Optimization-enhanced Extreme Learning Machine (PSO-ELM). The performance of three hydraulic turbines, namely Pelton, Kaplan, and Francis turbines, was experimentally investigated under different jet-opening and guide-vane conditions. The experimental results showed that the Pelton turbine (PT) achieved its highest efficiency at low jet opening, whereas the Kaplan and Francis turbines performed better at higher guide-vane openings. The measured data includes 36 tests, which were then used to evolve and evaluate hybrid ML models for predicting hydraulic power and efficiency. Jet-opening or guide-vane position (25%, 50%, 75% and 100%) and rotational speed were used as input variables, while brake power and efficiency were used as output variables. The proposed PSO-ELM model was compared with other optimized ELM models, including Genetic Algorithms Extreme Learning Machine (GA-ELM), Differential Evolution Extreme Learning Machine (DE-ELM), and Whale Optimization Algorithm Extreme Learning Machine (WOA-ELM), as well as Particle Swarm Optimization–Adaptive Neuro-Fuzzy Inference System (PSO-ANFIS) and Particle Swarm Optimization–Multi-Layer Perceptron (PSO-MLP) models. The suggested method presents a hopeful structure for tackling the difficulties linked to performance evaluation, thus enabling a more dependable and effective use of energy resources. The main findings validate that a PSO-based structure reaching an R2 value of 0.997 is more efficient in predictive tool performance optimization for hydropower systems.