Louisa Pickworth

Dr. Louisa Pickworth

orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 February 2021 in Journal of Synchrotron Radiation
Verified
Journal Article
Open access
PDF file
SZSuyun Zhu
Suyun Zhu
MSMattia Scardamaglia
Mattia Scardamaglia
JKJan Kundsen
Jan Kundsen
RSRami Sankari
Rami Sankari
HTHamed Tarawneh
Hamed Tarawneh
ASAndrey Shavorskiy
Andrey Shavorskiy
HIPPIE is a soft X-ray beamline on the 3 GeV electron storage ring of the MAX IV Laboratory, equipped with a novel ambient-pressure X-ray photoelectron spectroscopy (APXPS) instrument. The endstation is dedicated to performing in situ and operando X-ray photoelectron spectroscopy experiments in the presence of a controlled gaseous atmosphere at pressures up to 30 mbar [1 mbar = 100 Pa] as well as under ultra-high-vacuum conditions. The photon energy range is 250 to 2200 eV in planar polarization and with photon fluxes >1012 photons s−1 (500 mA ring current) at a resolving power of greater than 10000 and up to a maximum of 32000. The endstation currently provides two sample environments: a catalysis cell and an electrochemical/liquid cell. The former allows APXPS measurements of solid samples in the presence of a gaseous atmosphere (with a mixture of up to eight gases and a vapour of a liquid) and simultaneous analysis of the inlet/outlet gas composition by online mass spectrometry. The latter is a more versatile setup primarily designed for APXPS at the solid–liquid (dip-and-pull setup) or liquid–gas (liquid microjet) interfaces under full electrochemical control, and it can also be used as an open port for ad hoc-designed non-standard APXPS experiments with different sample environments. The catalysis cell can be further equipped with an IR reflection–absorption spectrometer, allowing for simultaneous APXPS and IR spectroscopy of the samples. The endstation is set up to easily accommodate further sample environments.

1 September 2020 in Physics of Plasmas
Verified
Journal Article
Closed access
PDF file
AZA. B. Zylstra
A. B. Zylstra
DCD. T. Casey
D. T. Casey
AKA. Kritcher
A. Kritcher
LPLouisa Pickworth
Louisa Pickworth
BBB. Bachmann
B. Bachmann
OHO. A. Hurricane
O. A. Hurricane
Mix of high-Z material from the capsule into the fuel can severely degrade the performance of inertial fusion implosions. On the Hybrid B campaign, testing the largest high-density-carbon capsules yet fielded at the National Ignition Facility, several shots show signatures of high levels of hot-spot mix. We attribute a ∼ 40 % yield degradation on these shots to the hot-spot mix, comparable to the level of degradation from large P2 asymmetries observed on some shots. A range of instability growth factors and diamond crystallinity were tested and they do not determine the level of mix for these implosions, which is instead set by the capsule quality.

28 July 2014 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
GSG. F. Swadling
G. F. Swadling
SLS. V. Lebedev
S. V. Lebedev
GHG. N. Hall
G. N. Hall
SPS. Patankar
S. Patankar
NSN. H. Stewart
N. H. Stewart
JYJ. Yuan
J. Yuan
A suite of laser based diagnostics is used to study interactions of magnetised, supersonic, radiatively cooled plasma flows produced using the Magpie pulse power generator (1.4 MA, 240 ns rise time). Collective optical Thomson scattering measures the time-resolved local flow velocity and temperature across 7–14 spatial positions. The scattering spectrum is recorded from multiple directions, allowing more accurate reconstruction of the flow velocity vectors. The areal electron density is measured using 2D interferometry; optimisation and analysis are discussed. The Faraday rotation diagnostic, operating at 1053 nm, measures the magnetic field distribution in the plasma. Measurements obtained simultaneously by these diagnostics are used to constrain analysis, increasing the accuracy of interpretation.

1 March 2020 in Physics of Plasmas
Verified
Journal Article
Closed access
PDF file
CWC. R. Weber
C. R. Weber
DCD. S. Clark
D. S. Clark
APA. Pak
A. Pak
NAN. Alfonso
N. Alfonso
BBB. Bachmann
B. Bachmann
MSM. Stadermann
M. Stadermann
The micrometer-scale tube that fills capsules with thermonuclear fuel in inertial confinement fusion experiments at the National Ignition Facility is also one of the implosion's main degradation sources. It seeds a perturbation that injects the ablator material into the center, radiating away some of the hot-spot energy. This paper discusses how the perturbation arises in experiments using high-density carbon ablators and how the ablator mix interacts once it enters the hot-spot. Both modeling and experiments show an in-flight areal-density perturbation and localized x-ray emission at stagnation from the fill-tube. Simulations suggest that the fill-tube is degrading an otherwise 1D implosion by ∼2×, but when other degradation sources are present, the yield reduction is closer to 20%. Characteristics of the fill-tube assembly, such as the through-hole size and the glue mass, alter the dynamics and magnitude of the degradation. These aspects point the way toward improvements in the design, some of which (smaller diameter fill-tube) have already shown improvements.

1 February 2013 in Physics of Plasmas
Verified
Journal Article
Open access
PDF file
GSG. F. Swadling
G. F. Swadling
SLS. V. Lebedev
S. V. Lebedev
NNN. Niasse
N. Niasse
JCJ. P. Chittenden
J. P. Chittenden
GHG. N. Hall
G. N. Hall
LSL. Suttle
L. Suttle
A series of experiments has been conducted in order to investigate the azimuthal structures formed by the interactions of cylindrically converging plasma flows during the ablation phase of aluminium wire array Z pinch implosions. These experiments were carried out using the 1.4 MA, 240 ns MAGPIE generator at Imperial College London. The main diagnostic used in this study was a two-colour, end-on, Mach-Zehnder imaging interferometer, sensitive to the axially integrated electron density of the plasma. The data collected in these experiments reveal the strongly collisional dynamics of the aluminium ablation streams. The structure of the flows is dominated by a dense network of oblique shock fronts, formed by supersonic collisions between adjacent ablation streams. An estimate for the range of the flow Mach number (M = 6.2-9.2) has been made based on an analysis of the observed shock geometry. Combining this measurement with previously published Thomson Scattering measurements of the plasma flow velocity by Harvey-Thompson et al. [Physics of Plasmas 19, 056303 (2012)] allowed us to place limits on the range of the Z¯Te of the plasma. The detailed and quantitative nature of the dataset lends itself well as a source for model validation and code verification exercises, as the exact shock geometry is sensitive to many of the plasma parameters. Comparison of electron density data produced through numerical modelling with the Gorgon 3D MHD code demonstrates that the code is able to reproduce the collisional dynamics observed in aluminium arrays reasonably well.

2 October 2017 in Nature Physics
Verified
Journal Article
Closed access
PDF file
RKR. K. Kirkwood
R. K. Kirkwood
DTD. P. Turnbull
D. P. Turnbull
TCT. Chapman
T. Chapman
SWS. C. Wilks
S. C. Wilks
MRM. D. Rosen
M. D. Rosen
BBB. E. Blue
B. E. Blue