Andrea L. Kritcher

Andrea L. Kritcher

Auto-generated profile, based on publicly available information

Andrea L. Kritcher

Lawrence Livermore National Laboratory

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 January 2022 in Nature
Verified
Journal Article
Open access
PDF file
AZA. B. Zylstra
A. B. Zylstra
OHO. A. Hurricane
O. A. Hurricane
DCD. A. Callahan
D. A. Callahan
AKA. L. Kritcher
A. L. Kritcher
JRJ. E. Ralph
J. E. Ralph
GZG. B. Zimmerman
G. B. Zimmerman
Obtaining a burning plasma is a critical step towards self-sustaining fusion energy1. A burning plasma is one in which the fusion reactions themselves are the primary source of heating in the plasma, which is necessary to sustain and propagate the burn, enabling high energy gain. After decades of fusion research, here we achieve a burning-plasma state in the laboratory. These experiments were conducted at the US National Ignition Facility, a laser facility delivering up to 1.9 megajoules of energy in pulses with peak powers up to 500 terawatts. We use the lasers to generate X-rays in a radiation cavity to indirectly drive a fuel-containing capsule via the X-ray ablation pressure, which results in the implosion process compressing and heating the fuel via mechanical work. The burning-plasma state was created using a strategy to increase the spatial scale of the capsule2,3 through two different implosion concepts4–7. These experiments show fusion self-heating in excess of the mechanical work injected into the implosions, satisfying several burning-plasma metrics3,8. Additionally, we describe a subset of experiments that appear to have crossed the static self-heating boundary, where fusion heating surpasses the energy losses from radiation and conduction. These results provide an opportunity to study α-particle-dominated plasmas and burning-plasma physics in the laboratory.

26 January 2022 in Nature Physics
Verified
Journal Article
Open access
PDF file
AKA. L. Kritcher
A. L. Kritcher
CYC. V. Young
C. V. Young
HRH. F. Robey
H. F. Robey
CWC. R. Weber
C. R. Weber
AZA. B. Zylstra
A. B. Zylstra
GZG. B. Zimmerman
G. B. Zimmerman
In a burning plasma state1–7, alpha particles from deuterium–tritium fusion reactions redeposit their energy and are the dominant source of heating. This state has recently been achieved at the US National Ignition Facility8 using indirect-drive inertial-confinement fusion. Our experiments use a laser-generated radiation-filled cavity (a hohlraum) to spherically implode capsules containing deuterium and tritium fuel in a central hot spot where the fusion reactions occur. We have developed more efficient hohlraums to implode larger fusion targets compared with previous experiments9,10. This delivered more energy to the hot spot, whereas other parameters were optimized to maintain the high pressures required for inertial-confinement fusion. We also report improvements in implosion symmetry control by moving energy between the laser beams11–16 and designing advanced hohlraum geometry17 that allows for these larger implosions to be driven at the present laser energy and power capability of the National Ignition Facility. These design changes resulted in fusion powers of 1.5 petawatts, greater than the input power of the laser, and 170 kJ of fusion energy18,19. Radiation hydrodynamics simulations20,21 show energy deposition by alpha particles as the dominant term in the hot-spot energy balance, indicative of a burning plasma state.

5 August 2020 in Nature
Verified
Journal Article
Closed access
PDF file
AKAndrea L. Kritcher
Andrea L. Kritcher
DSDamian C. Swift
Damian C. Swift
TDTilo Döppner
Tilo Döppner
BBBenjamin Bachmann
Benjamin Bachmann
LBLorin X. Benedict
Lorin X. Benedict
SGSiegfried H. Glenzer
Siegfried H. Glenzer

5 February 2024 in Physical Review Letters
Verified
Journal Article
Open access
PDF file
OHO. A. Hurricane
O. A. Hurricane
DCD. A. Callahan
D. A. Callahan
DCD. T. Casey
D. T. Casey
ACA. R. Christopherson
A. R. Christopherson
AKA. L. Kritcher
A. L. Kritcher
AZA. B. Zylstra
A. B. Zylstra
Fusion “scientific breakeven” (i.e., unity target gain Gtarget, total fusion energy out > laser energy input) has been achieved for the first time (here, Gtarget∼1.5). This Letter reports on the physics principles of the design changes that led to the first controlled fusion experiment, using laser indirect drive, on the National Ignition Facility to produce target gain greater than unity and exceeded the previously obtained conditions needed for ignition by the Lawson criterion. Key elements of the success came from reducing “coast time” (the time duration between the end of the laser pulse and implosion peak compression) and maximizing the internal energy delivered to the “hot spot” (the yield producing part of the fusion fuel). The link between coast time and maximally efficient conversion of kinetic energy into internal energy is explained. The energetics consequences of asymmetry and hydrodynamic-induced mixing were part of high-yield big radius implosion design experimental and design strategy. Herein, it is shown how asymmetry and mixing consolidate into one key relationship. It is shown that mixing distills into a kinetic energy cost similar to the impact of implosion asymmetry, shifting the threshold for ignition to higher implosion kinetic energy—a factor not normally included in most statements of the generalized Lawson criterion, but the key needed modifications clearly emerge.

1 July 2021 in Physics of Plasmas
Verified
Journal Article
Closed access
PDF file
AKA. L. Kritcher
A. L. Kritcher
AZA. B. Zylstra
A. B. Zylstra
DCD. A. Callahan
D. A. Callahan
OHO. A. Hurricane
O. A. Hurricane
CWC. Weber
C. Weber
MHM. Herrmann
M. Herrmann
HYBRID-E is an inertial confinement fusion implosion design that increases energy coupled to the hot spot by increasing the capsule scale in cylindrical hohlraums while operating within the current experimental limits of the National Ignition Facility. HYBRID-E reduces the hohlraum scale at a fixed capsule size compared to previous HYBRID designs, thereby increasing the hohlraum efficiency and energy coupled to the capsule, and uses the cross-beam energy transfer (CBET) to control the implosion symmetry by operating the inner (23° and 30°) and outer (44° and 50°) laser beams at different wavelengths ( Δ λ > 0). Small case to capsule ratio designs can suffer from insufficient drive at the waist of the hohlraum. We show that only a small amount of wavelength separation between the inner and outer beams ( Δ λ 1–2 Å) is required to control the symmetry in low-gas-filled hohlraums (0.3 mg/cm3 He) with enough drive at the waist of the hohlraum to symmetrically drive capsules 1180 μm in outer radius. This campaign is the first to use the CBET to control the symmetry in 0.3 mg/cm3 He-filled hohlraums, the lowest gas fill density yet fielded with Δ λ > 0. We find a stronger sensitivity of hot spot P2 in μm per Angstrom (40–50 μm/Å wavelength separation) than observed in high-gas-filled hohlraums and previous longer pulse designs that used a hohlraum gas fill density of 0.6 mg/cm3. There is currently no indication of transfer roll-off with increasing Δ λ , indicating that even longer pulses or larger capsules could be driven using the CBET in cylindrical hohlraums. We show that the radiation flux symmetry is well controlled during the foot of the pulse, and that the entire implosion can be tuned symmetrically in the presence of the CBET in this system, with low levels of laser backscatter out of the hohlraum and low levels of hot electron production from intense laser–plasma interactions. Radiation hydrodynamic simulations can accurately represent the early shock symmetry and be used as a design tool, but cannot predict the late-time radiation flux symmetry during the peak of the pulse, and semi-empirical models are used to design the experiments. Deuterium–tritium (DT)-layered tests of 1100 μm inner radius implosions showed performance close to expectations from simulations at velocities up to ∼360 km/s, and record yields at this velocity, when increasing the DT fuel layer thickness to mitigate hydrodynamic mixing of the ablator into the hot spot as a result of defects in the ablator. However, when the implosion velocity was increased, mixing due to these defects impacted performance. The ratio of measured to simulated yield for these experiments was directly correlated with the level of observed mixing. These simulations suggest that reducing the mixing, e.g., by improving the capsule defects, could result in higher performance. In addition, future experiments are planned to reduce the coast time at this scale, delay between the peak compression and the end of the laser, to increase the hot spot convergence and pressure. To reduce the coast time by several hundred ps compared to the 1100 μm inner radius implosions, HYBRID-E has also fielded 1050 μm inner radius capsules, which resulted in higher hot spot pressure and a fusion energy yield of ∼170 kJ.

1 September 2020 in Physics of Plasmas
Verified
Journal Article
Closed access
PDF file
AZA. B. Zylstra
A. B. Zylstra
DCD. T. Casey
D. T. Casey
AKA. Kritcher
A. Kritcher
LPLouisa Pickworth
Louisa Pickworth
BBB. Bachmann
B. Bachmann
OHO. A. Hurricane
O. A. Hurricane
Mix of high-Z material from the capsule into the fuel can severely degrade the performance of inertial fusion implosions. On the Hybrid B campaign, testing the largest high-density-carbon capsules yet fielded at the National Ignition Facility, several shots show signatures of high levels of hot-spot mix. We attribute a ∼ 40 % yield degradation on these shots to the hot-spot mix, comparable to the level of degradation from large P2 asymmetries observed on some shots. A range of instability growth factors and diamond crystallinity were tested and they do not determine the level of mix for these implosions, which is instead set by the capsule quality.